Efficient Error detection Architectures for Low-Energy Block Ciphers with the Case Study of Midori Benchmarked on FPGA

Achieving secure, high performance implementations for constrained applications such as implantable and wearable medical devices is a priority in efficient block ciphers. However, security of these algorithms is not guaranteed in presence of malicious and natural faults. Recently, a new lightweight block cipher, Midori, has been proposed which optimizes the energy consumption besides having low latency and hardware complexity. This algorithm is proposed in two energy-efficient varients, i.e., Midori64 and Midori128, with block sizes equal to 64 and 128 bits. In this thesis, fault diagnosis schemes for variants of Midori are proposed. To the best of the our knowledge, there has been no fault diagnosis scheme presented in the literature for Midori to date. The fault diagnosis schemes are provided for the nonlinear S-box layer and for the round structures with both 64-bit and 128-bit Midori symmetric key ciphers. The proposed schemes are benchmarked on field-programmable gate array (FPGA) and their error coverage is assessed with fault-injection simulations. These proposed error detection architectures make the implementations of this new low-energy lightweight block cipher more reliable

Cryptanalysis of Block Ciphers with New Design Strategies

Block ciphers are among the mostly widely used symmetric-key cryptographic primitives, which are fundamental building blocks in cryptographic/security systems. Most of the public-key primitives are based on hard mathematical problems such as the integer factorization in the RSA algorithm and discrete logarithm problem in the DiffieHellman. Therefore, their security are mathematically proven. In contrast, symmetric-key primitives are usually not constructed based on well-defined hard mathematical problems. Hence, in order to get some assurance in their claimed security properties, they must be studied against different types of cryptanalytic techniques. Our research is dedicated to the cryptanalysis of block ciphers. In particular, throughout this thesis, we investigate the security of some block ciphers constructed with new design strategies. These new strategies include (i) employing simple round function, and modest key schedule, (ii) using another input called tweak rather than the usual two inputs of the block ciphers, the plaintext and the key, to instantiate different permutations for the same key. This type of block ciphers is called a tweakable block cipher, (iii) employing linear and non-linear components that are energy efficient to provide low energy consumption block ciphers, (iv) employing optimal diffusion linear transformation layer while following the AES-based construction to provide faster diffusion rate, and (v) using rather weak but larger S-boxes in addition to simple linear transformation layers to provide provable security of ARX-based block ciphers against single characteristic differential and linear cryptanalysis. The results presented in this thesis can be summarized as follows: Initially, we analyze the security of two lightweight block ciphers, namely, Khudra and Piccolo against Meet-in-the-Middle (MitM) attack based on the Demirci and Selcuk approach exploiting the simple design of the key schedule and round function. Next, we investigate the security of two tweakable block ciphers, namely, Kiasu-BC and SKINNY. According to the designers, the best attack on Kiasu-BC covers 7 rounds. However, we exploited the tweak to present 8-round attack using MitM with efficient enumeration cryptanalysis. Then, we improve the previous results of the impossible differential cryptanalysis on SKINNY exploiting the tweakey schedule and linear transformation layer. Afterwards, we study the security of new low energy consumption block cipher, namely, Midori128 where we present the longest impossible differential distinguishers that cover complete 7 rounds. Then, we utilized 4 of these distinguishers to launch key recovery attack against 11 rounds of Midori128 to improve the previous results on this cipher using the impossible differential cryptanalysis. Then, using the truncated differential cryptanalysis, we are able to attack 13 rounds of Midori128 utilizing a 10-round differential distinguisher. We also analyze Kuznyechik, the standard Russian federation block cipher, against MitM with efficient enumeration cryptanalysis where we improve the previous results on Kuznyechik, using MitM attack with efficient enumeration, by presenting 6-round attack. Unlike the previous attack, our attack exploits the exact values of the coefficients of the MDS transformation that is used in the cipher. Finally, we present key recovery attacks using the multidimensional zero-correlation cryptanalysis against SPARX-128, which follows the long trail design strategy, to provide provable security of ARX-based block ciphers against single characteristic differential and linear cryptanalysis

SKINNY with Scalpel - Comparing Tools for Differential Analysis

Evaluating resistance of ciphers against differential cryptanalysis is essential to define the number of rounds of new designs and to mount attacks derived from differential cryptanalysis. In this paper, we compare existing automatic tools to find the best differential characteristic on the SKINNY block cipher. As usually done in the literature, we split this search in two stages denoted by Step 1 and Step 2. In Step 1, each difference variable is abstracted with a Boolean variable and we search for the value that minimizes the trail weight, whereas Step 2 tries to instantiate each difference value while maximizing the overall differential characteristic probability. We model Step 1 using a MILP tool, a SAT tool, an ad-hoc method and a CP tool based on the Choco-solver library and provide performance results. Step 2 is modeled using the Choco-solver as it seems to outperform all previous methods on this stage. Notably, for SKINNY-128 in the SK model and for 13 rounds, we retrieve the results of Abdelkhalek et al. within a few seconds (to compare with 16 days) and we provide, for the first time, the best differential related-tweakey characteristic up to respectively 14 and 12 rounds for the TK1 and TK2 models

Selected Topics in Cryptanalysis of Symmetric Ciphers

It is well established that a symmetric cipher may be described as a system of Boolean polynomials, and that the security of the cipher cannot be better than the difficulty of solving said system. Compressed Right-Hand Side (CRHS) Equations is but one way of describing a symmetric cipher in terms of Boolean polynomials. The first paper of this thesis provides a comprehensive treatment firstly of the relationship between Boolean functions in algebraic normal form, Binary Decision Diagrams and CRHS equations. Secondly, of how CRHS equations may be used to describe certain kinds of symmetric ciphers and how this model may be used to attempt a key-recovery attack. This technique is not left as a theoretical exercise, as the process have been implemented as an open-source project named CryptaPath. To ensure accessibility for researchers unfamiliar with algebraic cryptanalysis, CryptaPath can convert a reference implementation of the target cipher, as specified by a Rust trait, into the CRHS equations model automatically. CRHS equations are not limited to key-recovery attacks, and Paper II explores one such avenue of CRHS equations flexibility. Linear and differential cryptanalysis have long since established their position as two of the most important cryptanalytical attacks, and every new design since must show resistance to both. For some ciphers, like the AES, this resistance can be mathematically proven, but many others are left to heuristic arguments and computer aided proofs. This work is tedious, and most of the tools require good background knowledge of a tool/technique to transform a design to the right input format, with a notable exception in CryptaGraph. CryptaGraph is written in Rust and transforms a reference implementation into CryptaGraphs underlying data structure automatically. Paper II introduces a new way to use CRHS equations to model a symmetric cipher, this time in such a way that linear and differential trail searches are possible. In addition, a new set of operations allowing us to count the number of active S-boxes in a path is presented. Due to CRHS equations effective initial data compression, all possible trails are captured in the initial system description. As is the case with CRHS equations, the crux is the memory consumption. However, this approach also enables the graph of a CRHS equation to be pruned, allowing the memory consumption to be kept at manageable levels. Unfortunately, pruning nodes also means that we will lose valid, incomplete paths, meaning that the hulls found are probably incomplete. On the flip side, all paths, and their corresponding probabilities, found by the tool are guaranteed to be valid trails for the cipher. This theory is also implemented in an extension of CryptaPath, and the name is PathFinder. PathFinder is also able to automatically turn a reference implementation of a cipher into its CRHS equations-based model. As an additional bonus, PathFinder supports the reference implementation specifications specified by CryptaGraph, meaning that the same reference implementation can be used for both CryptaGraph and PathFinder. Paper III shifts focus onto symmetric ciphers designed to be used in conjunction with FHE schemes. Symmetric ciphers designed for this purpose are relatively new and have naturally had a strong focus on reducing the number of multiplications performed. A multiplication is considered expensive on the noise budget of the FHE scheme, while linear operations are viewed as cheap. These ciphers are all assuming that it is possible to find parameters in the various FHE schemes which allow these ciphers to work well in symbiosis with the FHE scheme. Unfortunately, this is not always possible, with the consequence that the decryption process becomes more costly than necessary. Paper III therefore proposes Fasta, a stream cipher which has its parameters and linear layer especially chosen to allow efficient implementation over the BGV scheme, particularly as implemented in the HElib library. The linear layers are drawn from a family of rotation-based linear transformations, as cyclic rotations are cheap to do in FHE schemes that allow packing of multiple plaintext elements in one FHE ciphertext. Fasta follows the same design philosophy as Rasta, and will never use the same linear layer twice under the same key. The result is a stream cipher tailor-made for fast evaluation in HElib. Fasta shows an improvement in throughput of a factor more than 7 when compared to the most efficient implementation of Rasta.Doktorgradsavhandlin

Lightweight symmetric cryptography

The Internet of Things is one of the principal trends in information technology nowadays. The main idea behind this concept is that devices communicate autonomously with each other over the Internet. Some of these devices have extremely limited resources, such as power and energy, available time for computations, amount of silicon to produce the chip, computational power, etc. Classical cryptographic primitives are often infeasible for such constrained devices. The goal of lightweight cryptography is to introduce cryptographic solutions with reduced resource consumption, but with a sufficient security level. Although this research area was of great interest to academia during the last years and a large number of proposals for lightweight cryptographic primitives have been introduced, almost none of them are used in real-word. Probably one of the reasons is that, for academia, lightweight usually meant to design cryptographic primitives such that they require minimal resources among all existing solutions. This exciting research problem became an important driver which allowed the academic community to better understand many cryptographic design concepts and to develop new attacks. However, this criterion does not seem to be the most important one for industry, where lightweight may be considered as "rightweight". In other words, a given cryptographic solution just has to fit the constraints of the specific use cases rather than to be the smallest. Unfortunately, academic researchers tended to neglect vital properties of the particular types of devices, into which they intended to apply their primitives. That is, often solutions were proposed where the usage of some resources was reduced to a minimum. However, this was achieved by introducing new costs which were not appropriately taken into account or in such a way that the reduction of costs also led to a decrease in the security level. Hence, there is a clear gap between academia and industry in understanding what lightweight cryptography is. In this work, we are trying to fill some of these gaps. We carefully investigate a broad number of existing lightweight cryptographic primitives proposed by academia including authentication protocols, stream ciphers, and block ciphers and evaluate their applicability for real-world scenarios. We then look at how individual components of design of the primitives influence their cost and summarize the steps to be taken into account when designing primitives for concrete cost optimization, more precisely - for low energy consumption. Next, we propose new implementation techniques for existing designs making them more efficient or smaller in hardware without the necessity to pay any additional costs. After that, we introduce a new stream cipher design philosophy which enables secure stream ciphers with smaller area size than ever before and, at the same time, considerably higher throughput compared to any other encryption schemes of similar hardware cost. To demonstrate the feasibility of our findings we propose two ciphers with the smallest area size so far, namely Sprout and Plantlet, and the most energy efficient encryption scheme called Trivium-2. Finally, this thesis solves a concrete industrial problem. Based on standardized cryptographic solutions, we design an end-to-end data-protection scheme for low power networks. This scheme was deployed on the water distribution network in the City of Antibes, France

Distinguisher and Related-Key Attack on HALFLOOP-96

HALFLOOP-96 is a 96-bit tweakable block cipher used in high frequency radio to secure automatic link establishment messages. In this paper, we concentrate on its differential properties in the contexts of conventional, related-tweak, and related-key differential attacks. Using automatic techniques, we determine the minimum number of active S-boxes and the maximum differential probability in each of the three configurations. The resistance of HALFLOOP-96 to differential attacks in the conventional and related-tweak configurations is good, and the longest distinguishers in both configurations consist of five rounds. In contrast, the security of the cipher against differential attacks in the related-key configuration is inadequate. The most effective related-key distinguisher we can find spans eight rounds. The 8-round related-key differential distinguisher is then utilised to initiate a 9-round weak-key attack. With $2^{92.96}$ chosen-plaintexts, 38.77-bit equivalent information about the keys can be recovered. Even though the attack does not pose a significant security threat to HALFLOOP-96, its security margin in the related-key configuration is exceedingly narrow. Therefore, improper use must be avoided in the application

Security of Ubiquitous Computing Systems

The chapters in this open access book arise out of the EU Cost Action project Cryptacus, the objective of which was to improve and adapt existent cryptanalysis methodologies and tools to the ubiquitous computing framework. The cryptanalysis implemented lies along four axes: cryptographic models, cryptanalysis of building blocks, hardware and software security engineering, and security assessment of real-world systems. The authors are top-class researchers in security and cryptography, and the contributions are of value to researchers and practitioners in these domains. This book is open access under a CC BY license

Parallel SAT Framework to Find Clustering of Differential Characteristics and Its Applications

The most crucial but time-consuming task for differential cryptanalysis is to find a differential with a high probability. To tackle this task, we propose a new SAT-based automatic search framework to efficiently figure out a differential with the highest probability under a specified condition. As the previous SAT methods (e.g., the Sun et al’s method proposed at ToSC 2021(1)) focused on accelerating the search for an optimal single differential characteristic, these are not optimized for evaluating a clustering effect to obtain a tighter differential probability of differentials. In contrast, our framework takes advantage of a method to solve incremental SAT problems in parallel using a multi-threading technique, and consequently, it offers the following advantages compared with the previous methods: (1) speedy identification of a differential with the highest probability under the specified conditions; (2) efficient construction of the truncated differential with the highest probability from the obtained multiple differentials; and (3) applicability to a wide class of symmetric-key primitives. To demonstrate the effectiveness of our framework, we apply it to the block cipher PRINCE and the tweakable block cipher QARMA. We successfully figure out the tight differential bounds for all variants of PRINCE and QARMA within the practical time, thereby identifying the longest distinguisher for all the variants, which improves existing ones by one to four more rounds. Besides, we uncover notable differences between PRINCE and QARMA in the behavior of differential, especially for the clustering effect. We believe that our findings shed light on new structural properties of these important primitives. In the context of key recovery attacks, our framework allows us to derive the key-recovery-friendly truncated differentials for all variants of QARMA. Consequently, we report key recovery attacks based on (truncated) differential cryptanalysis on QARMA for the first time and show these key recovery attacks are competitive with existing other attacks

The QARMA Block Cipher Family. Almost MDS Matrices Over Rings With Zero Divisors, Nearly Symmetric Even-Mansour Constructions With Non-Involutory Central Rounds, and Search Heuristics for Low-Latency S-Boxes

This paper introduces QARMA, a new family of lightweight tweakable block ciphers targeted at applications such as memory encryption, the generation of very short tags for hardware-assisted prevention of software exploitation, and the construction of keyed hash functions. QARMA is inspired by reflection ciphers such as PRINCE, to which it adds a tweaking input, and MANTIS. However, QARMA differs from previous reflector constructions in that it is a three-round Even-Mansour scheme instead of a FX-construction, and its middle permutation is non-involutory and keyed. We introduce and analyse a family of Almost MDS matrices defined over a ring with zero divisors that allows us to encode rotations in its operation while maintaining the minimal latency associated to {0, 1}-matrices. The purpose of all these design choices is to harden the cipher against various classes of attacks. We also describe new S-Box search heuristics aimed at minimising the critical path. QARMA exists in 64- and 128-bit block sizes, where block and tweak size are equal, and keys are twice as long as the blocks. We argue that QARMA provides sufficient security margins within the constraints determined by the mentioned applications, while still achieving best-in-class latency. Implementation results on a state-of-the art manufacturing process are reported. Finally, we propose a technique to extend the length of the tweak by using, for instance, a universal hash function, which can also be used to strengthen the security of QARMA

Weak Keys in Reduced AEGIS and Tiaoxin

AEGIS-128 and Tiaoxin-346 (Tiaoxin for short) are two AES-based primitives submitted to the CAESAR competition. Among them, AEGIS-128 has been selected in the final portfolio for high-performance applications, while Tiaoxin is a third-round candidate. Although both primitives adopt a stream cipher based design, they are quite different from the well-known bit-oriented stream ciphers like Trivium and the Grain family. Their common feature consists in the round update function, where the state is divided into several 128-bit words and each word has the option to pass through an AES round or not. During the 6-year CAESAR competition, it is surprising that for both primitives there is no third-party cryptanalysis of the initialization phase. Due to the similarities in both primitives, we are motivated to investigate whether there is a common way to evaluate the security of their initialization phases. Our technical contribution is to write the expressions of the internal states in terms of the nonce and the key by treating a 128-bit word as a unit and then carefully study how to simplify these expressions by adding proper conditions. As a result, we find that there are several groups of weak keys with 296 keys each in 5-round AEGIS-128 and 8-round Tiaoxin, which allows us to construct integral distinguishers with time complexity 232 and data complexity 232. Based on the distinguisher, the time complexity to recover the weak key is 272 for 5-round AEGIS-128. However, the weak key recovery attack on 8-round Tiaoxin will require the usage of a weak constant occurring with probability 2−32. All the attacks reach half of the total number of initialization rounds. We expect that this work can advance the understanding of the designs similar to AEGIS and Tiaoxin