On the Merits of Deploying TDM-based Next-Generation PON Solutions in the Access Arena As Multiservice, All Packet-Based 4G Mobile Backhaul RAN Architecture

The phenomenal growth of mobile backhaul capacity required to support the emerging fourth-generation (4G) traffic including mobile WiMAX, cellular Long-Term Evolution (LTE), and LTE-Advanced (LTE-A) requires rapid migration from today\u27s legacy circuit switched T1/E1 wireline and microwave backhaul technologies to a new fiber-supported, all-packet-based mobile backhaul infrastructure. Clearly, a cost effective fiber supported all-packet-based mobile backhaul radio access network (RAN) architecture that is compatible with these inherently distributed 4G RAN architectures is needed to efficiently scale current mobile backhaul networks. However, deploying a green fiber-based mobile backhaul infrastructure is a costly proposition mainly due to the significant cost associated with digging the trenches in which the fiber is to be laid. These, along with the inevitable trend towards all-IP/Ethernet transport protocols and packet switched networks, have prompted many carriers around the world to consider the potential of utilizing the existing fiber-based Passive Optical Network (PON) access infrastructure as an all-packet-based converged fixed-mobile optical access networking transport architecture to backhaul both mobile and typical wireline traffic. Passive Optical Network (PON)-based fiber-to-the-curb/home (FTTC/FTTH) access networks are being deployed around the globe based on two Time-Division Multiplexed (TDM) standards: ITU G.984 Gigabit PON (GPON) and IEEE 802.ah Ethernet PON (EPON). A PON connects a group of Optical Network Units (ONUs) located at the subscriber premises to an Optical Line Terminal (OLT) located at the service provider\u27s facility. It is the purpose of this thesis to examine the technological requirements and assess the performance analysis and feasibility for deploying TDM-based next-generation (NG) PON solutions in the access arena as multiservice, all packet-based 4G mobile backhaul RAN and/or converged fixed-mobile optical networking architecture. Specifically, this work proposes and devises a simple and cost-effective 10G-EPON-based 4G mobile backhaul RAN architecture that efficiently transports and supports a wide range of existing and emerging fixed-mobile advanced multimedia applications and services along with the diverse quality of service (QoS), rate, and reliability requirements set by these services. The techno-economics merits of utilizing PON-based 4G RAN architecture versus that of traditional 4G (mobile WiMAX and LTE) RAN will be thoroughly examine and quantified. To achieve our objective, we utilize the existing fiber-based PON access infrastructure with novel ring-based distribution access network and wireless-enabled OLT and ONUs as the multiservice packet-based 4G mobile backhaul RAN infrastructure. Specifically, to simplify the implementation of such a complex undertaking, this work is divided into two sequential phases. In the first phase, we examine and quantify the overall performance of the standalone ring-based 10G-EPON architecture (just the wireline part without overlaying/incorporating the wireless part (4G RAN)) via modeling and simulations. We then assemble the basic building blocks, components, and sub-systems required to build up a proof-of-concept prototype testbed for the standalone ring-based EPON architecture. The testbed will be used to verify and demonstrate the performance of the standalone architecture, specifically, in terms of power budget, scalability, and reach. In the second phase, we develop an integrated framework for the efficient interworking between the two wireline PON and 4G mobile access technologies, particularly, in terms of unified network control and management (NCM) operations. Specifically, we address the key technical challenges associated with tailoring a typically centralized PON-based access architecture to interwork with and support a distributed 4G RAN architecture and associated radio NCM operations. This is achieved via introducing and developing several salient-networking innovations that collectively enable the standalone EPON architecture to support a fully distributed 4G mobile backhaul RAN and/or a truly unified NG-PON-4G access networking architecture. These include a fully distributed control plane that enables intercommunication among the access nodes (ONUs/BSs) as well as signaling, scheduling algorithms, and handoff procedures that operate in a distributed manner. Overall, the proposed NG-PON architecture constitutes a complete networking paradigm shift from the typically centralized PON\u27s architecture and OLT-based NCM operations to a new disruptive fully distributed PON\u27s architecture and NCM operations in which all the typically centralized OLT-based PON\u27s NCM operations are migrated to and independently implemented by the access nodes (ONUs) in a distributed manner. This requires migrating most of the typically centralized wireline and radio control and user-plane functionalities such as dynamic bandwidth allocation (DBA), queue management and packet scheduling, handover control, radio resource management, admission control, etc., typically implemented in today\u27s OLT/RNC, to the access nodes (ONUs/4G BSs). It is shown that the overall performance of the proposed EPON-based 4G backhaul including both the RAN and Mobile Packet Core (MPC) {Evolved Packet Core (EPC) per 3GPP LTE\u27s standard} is significantly augmented compared to that of the typical 4G RAN, specifically, in terms of handoff capability, signaling overhead, overall network throughput and latency, and QoS support. Furthermore, the proposed architecture enables redistributing some of the intelligence and NCM operations currently centralized in the MPC platform out into the access nodes of the mobile RAN. Specifically, as this work will show, it enables offloading sizable fraction of the mobile signaling as well as actual local upstream traffic transport and processing (LTE bearers switch/set-up, retain, and tear-down and associated signaling commands from the BSs to the EPC and vice-versa) from the EPC to the access nodes (ONUs/BSs). This has a significant impact on the performance of the EPC. First, it frees up a sizable fraction of the badly needed network resources as well as processing on the overloaded centralized serving nodes (AGW) in the MPC. Second, it frees up capacity and sessions on the typically congested mobile backhaul from the BSs to the EPC and vice-versa

IP/optical integration in access network infrastructures: key issues on resource provisioning

This thesis contributes to the advancement of Fiber-Wireless (FiWi) access technologies, through the development of algorithms for resource allocation and energy efficient routing. FiWi access networks use both optical and wireless/cellular technologies to provide high bandwidth and ubiquity, required by users and current high demanding services. FiWi access technologies are divided in two parts. In one of the parts, fiber is brought from the central office to near the users, while in the other part wireless routers or base stations take over and provide Internet access to users. Many technologies can be used at both the optical and wireless parts, which lead to different integration and optimization problems to be solved. In this thesis, the focus will be on FiWi access networks that use a passive optical network at the optical section and a wireless mesh network at the wireless section. In such networks, two important aspects that influence network performance are: allocation of resources and traffic routing throughout the mesh section. In this thesis, both problems are addressed. A fair bandwidth allocation algorithm is developed, which provides fairness in terms of bandwidth and in terms of experienced delays among all users. As for routing, an energy efficient routing algorithm is proposed that optimizes sleeping and productive periods throughout the wireless and optical sections. To develop the stated algorithms, game theory and networks formation theory were used. These are powerful mathematical tools that can be used to solve problems involving agents with conflicting interests. Since, usually, these tools are not common knowledge, a brief survey on game theory and network formation theory is provided to explain the concepts that are used throughout the thesis. As such, this thesis also serves as a showcase on the use of game theory and network formation theory to develop new algorithms

Modelo de evaluación técnico-económica de tecnologías de acceso

El contenido de los capítulos 3 y 4 está sujeto a confidencialidad. 233 p.-Define un modelo de evaluación técnico-económica para tecnologías de acceso de aplicación universal,escalable, flexible y generalizable, que permite la comparación de cualesquiera tecnologías de acceso endiferentes escenarios. Se denomina modelo UTEM (Universal Techno-Economic Model).-Desarrolla unametodología de aplicación específica del modelo UTEM para facilitar su uso por parte de los diferentesagentes del sector de telecomunicaciones, proporcionando pautas para el diseño de escenarios, laaplicación del modelo y la adecuada interpretación de los resultados obtenidos. ¿Define las característicasde un modelo técnico-económico teórico universal. ¿Clasifica los modelos de la literatura en base adichas características. -Posibilita la caracterización y comparación técnica y económica de cualquiertecnología de acceso en cualquier configuración o combinación de elementos serie o paralelo, así comoaccesos redundantes. -Define métricas específicas de prestaciones y eficiencia tecno-económicas de lastecnologías de acceso que permiten su evaluación y comparación. -Identifica el grado de cumplimiento delos requisitos de cliente técnicos y/o económicos establecidos por el usuario del modelo para cadatecnología.-Identifica el número mínimo de accesos redundantes de una tecnología que permiten cumplirlos requisitos de cliente.-Permite la predicción de tendencias y decisiones en el ámbito del acceso-Permitela evaluación técnico-económica de tecnologías de acceso en aproximaciones `top-down¿ (perspectiva dedespliegue), y `bottom-up¿ (desde la perspectiva del cliente o usuario final).-Permite la comparación decualesquiera tecnologías de acceso. es

Modelo de evaluación técnico-económica de tecnologías de acceso

El contenido de los capítulos 3 y 4 está sujeto a confidencialidad. 233 p.-Define un modelo de evaluación técnico-económica para tecnologías de acceso de aplicación universal,escalable, flexible y generalizable, que permite la comparación de cualesquiera tecnologías de acceso endiferentes escenarios. Se denomina modelo UTEM (Universal Techno-Economic Model).-Desarrolla unametodología de aplicación específica del modelo UTEM para facilitar su uso por parte de los diferentesagentes del sector de telecomunicaciones, proporcionando pautas para el diseño de escenarios, laaplicación del modelo y la adecuada interpretación de los resultados obtenidos. ¿Define las característicasde un modelo técnico-económico teórico universal. ¿Clasifica los modelos de la literatura en base adichas características. -Posibilita la caracterización y comparación técnica y económica de cualquiertecnología de acceso en cualquier configuración o combinación de elementos serie o paralelo, así comoaccesos redundantes. -Define métricas específicas de prestaciones y eficiencia tecno-económicas de lastecnologías de acceso que permiten su evaluación y comparación. -Identifica el grado de cumplimiento delos requisitos de cliente técnicos y/o económicos establecidos por el usuario del modelo para cadatecnología.-Identifica el número mínimo de accesos redundantes de una tecnología que permiten cumplirlos requisitos de cliente.-Permite la predicción de tendencias y decisiones en el ámbito del acceso-Permitela evaluación técnico-económica de tecnologías de acceso en aproximaciones `top-down¿ (perspectiva dedespliegue), y `bottom-up¿ (desde la perspectiva del cliente o usuario final).-Permite la comparación decualesquiera tecnologías de acceso. es

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Green radio communication networks applying radio-over-fibre technology for wireless access

Wireless communication increasingly is becoming the first choice link to enter into the global information society. It is an essential part of broadband communication networks, due to its capacity to cover the end-user domain, outdoors or indoors. The use of mobile phones and broadband has already exceeded the one of the fixed telephones and has caused tremendous changes in peoples life, as not only to be recognised in the current political overthrows. The all-around presence of wireless communication links combined with functions that support mobility will make a roaming person-bound communication network possible in the near future. This idea of a personal network, in which a user has his own communication environment available everywhere, necessitates immense numbers of radio access points to maintain the wireless links and support mobility. The progress towards “all-around wireless” needs budget and easily maintainable radio access points, with simplified signal processing and consolidation of the radio network functions in a central station. The RF energy consumption in mobile base stations is one of the main problems in the wireless communication system, which has led to the worldwide research in so called green communication, which offers an environmentally friendly and cost-effective solution. In order to extend networks and mobility support, the simplification of antenna stations and broadband communication capacity becomes an increasingly urgent demand, also the extension of the wireless signal transmission distance to consolidate the signal processing in a centralised site. Radio-over-Fibre technology (RoF) was considered and found to be the most promising solution to achieve effective delivery of wireless and baseband signals, also to reduce RF energy consumption. The overall aim of this research project was to simulate the transmission of wireless and baseband RF signals via fibre for a long distance in high quality, consuming a low-power budget. Therefore, this thesis demonstrated a green radio communication network and the advantage of transmitting signals via fibre rather than via air. The contributions of this research work were described in the follows: Firstly, a comparison of the power consumption in WiMAX via air and fibre is presented. As shown in the simulation results, the power budget for the transmission of 64 QAM WiMAX IEEE 802.16-2005 via air for a distance of 5km lies at -189.67 dB, whereas for the transmission via RoF for a distance of 140km, the power consumption ranges at 65dB. Through the deployment of a triple symmetrical compensator technique, consisting of SMF, DCF and FBG, the transmission distance of the 54 Mbps WiMAX signal can be increased to 410km without increasing the power budget of 65dB. An amendment of the triple compensator technique to SMF, DCF and CFBG allows a 120Mbps WiMAX signal transmission with a clear RF spectrum of 3.5 GHz and constellation diagram over a fibre length of 792km using a power budget of 192dB. Secondly, the thesis demonstrates a simulation setup for the deployment of more than one wireless system, namely 64 QAM WiMAX IEEE 802.16-2005 and LTE, for a data bit rate of 1Gbps via Wavelength Division Multiplexing (WDM) RoF over a transmission distance of 1800km. The RoF system includes two triple symmetrical compensator techniques - DCF, SMF, and CFBG - to obtain a large bandwidth, power budget of 393.6dB and a high signal quality for the long transmission distance. Finally, the thesis proposed a high data bit rate and energy efficient simulation architecture, applying a passive optical component for a transmission span up to 600km. A Gigabit Optical Passive Network (GPON) based on RoF downlink 2.5 Gbps and uplink 1.25Gbps is employed to carry LTE and WiMAX, also 18 digital channels by utilising Coarse Wavelength Division Multiplexing (CWDM). The setup achieved high data speed, a low-power budget of 151.2dB, and an increased service length of up to 600km