159 research outputs found
Majorization-Minimization based Hybrid Localization Method for High Precision Localization in Wireless Sensor Networks
This paper investigates the hybrid source localization problem using the four
radio measurements - time of arrival (TOA), time difference of arrival (TDOA),
received signal strength (RSS) and angle of arrival (AOA). First, after
invoking tractable approximations in the RSS and AOA models, the maximum
likelihood estimation (MLE) problem for the hybrid TOA-TDOA-RSS-AOA data model
is derived. Then, in the MLE, which has the least-squares objective, weights
determined using the range-based characteristics of the four heterogeneous
measurements, are introduced. The resultant weighted least-squares problem
obtained, which is non-smooth and non-convex, is solved using the principle of
the majorization-minimization (MM), leading to an iterative algorithm that has
a guaranteed convergence. The key feature of the proposed method is that it
provides a unified framework where localization using any possible merger out
of these four measurements can be implemented as per the
requirement/application. Extensive numerical simulations are conducted to study
the estimation efficiency of the proposed method. The proposed method employing
all four measurements is compared against a conventionally used method and also
against the proposed method employing only limited combinations of the four
measurements. The results obtained indicate that the hybrid localization model
improves the localization accuracy compared to the heterogeneous measurements.
The integration of different measurements also yields good accuracy in the
presence of non-line of sight (NLOS) errors
Collaborative Indoor Positioning Systems: A Systematic Review
Research and development in Collaborative Indoor Positioning Systems (CIPSs) is growing
steadily due to their potential to improve on the performance of their non-collaborative counterparts.
In contrast to the outdoors scenario, where Global Navigation Satellite System is widely adopted, in
(collaborative) indoor positioning systems a large variety of technologies, techniques, and methods is
being used. Moreover, the diversity of evaluation procedures and scenarios hinders a direct comparison. This paper presents a systematic review that gives a general view of the current CIPSs. A total of
84 works, published between 2006 and 2020, have been identified. These articles were analyzed and
classified according to the described system’s architecture, infrastructure, technologies, techniques,
methods, and evaluation. The results indicate a growing interest in collaborative positioning, and
the trend tend to be towards the use of distributed architectures and infrastructure-less systems.
Moreover, the most used technologies to determine the collaborative positioning between users are
wireless communication technologies (Wi-Fi, Ultra-WideBand, and Bluetooth). The predominant collaborative positioning techniques are Received Signal Strength Indication, Fingerprinting, and Time
of Arrival/Flight, and the collaborative methods are particle filters, Belief Propagation, Extended
Kalman Filter, and Least Squares. Simulations are used as the main evaluation procedure. On the
basis of the analysis and results, several promising future research avenues and gaps in research
were identified
Recommended from our members
Wireless indoor localisation within the 5G internet of radio light
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonNumerous applications can be enhanced by accurate and efficient indoor localisation using wireless
sensor networks, however trade-offs often exist between these two parameters. In this thesis, realworld
and simulation data is used to examine the hybrid millimeter wave and Visible Light
Communications (VLC) architecture of the 5G Internet of Radio Light (IoRL) Horizon 2020 project.
Consequently, relevant localisation challenges within Visible Light Positioning (VLP) and asynchronous
sampling networks are identified, and more accurate and efficient solutions are developed.
Currently, VLP relies strongly on the assumed Lambertian properties of light sources.
However, in practice, not all lights are Lambertian. To support the widespread deployment of VLC
technology in numerous environments, measurements from non-Lambertian sources are analysed to
provide new insights into the limitations of existing VLP techniques. Subsequently, a novel VLP
calibration technique is proposed, and results indicate a 59% accuracy improvement against existing
methods. This solution enables high accuracy centimetre level VLP to be achieved with non-
Lambertian sources.
Asynchronous sampling of range-based measurements is known to impact localisation
performance negatively. Various Asynchronous Sampling Localisation Techniques (ASLT) exist to
mitigate these effects. While effective at improving positioning performance, the exact suitability of
such solutions is not evident due to their additional processes, subsequent complexity, and increased
costs. As such, extensive simulations are conducted to study the effectiveness of ASLT under variable
sampling latencies, sensor measurement noise, and target trajectories. Findings highlight the
computational demand of existing ASLT and motivate the development of a novel solution. The
proposed Kalman Extrapolated Least Squares (KELS) method achieves optimal localisation
performance with a significant energy reduction of over 50% when compared to current leading ASLT.
The work in this thesis demonstrates both the capability for high performance VLP from non-
Lambertian sources as well as the potential for energy efficient localisation for sequentially sampled
range measurements.Horizon 202
Sistemas de posicionamento baseados em comunicação por luz para ambientes interiores
The demand for highly precise indoor positioning systems (IPSs) is growing
rapidly due to its potential in the increasingly popular techniques of the
Internet of Things, smart mobile devices, and artificial intelligence. IPS
becomes a promising research domain that is getting wide attention due to its
benefits in several working scenarios, such as, industries, indoor public
locations, and autonomous navigation. Moreover, IPS has a prominent
contribution in day-to-day activities in organizations such as health care
centers, airports, shopping malls, manufacturing, underground locations, etc.,
for safe operating environments. In indoor environments, both radio frequency
(RF) and optical wireless communication (OWC) based technologies could be
adopted for localization. Although the RF-based global positioning system,
such as, Global positioning system offers higher penetration rates with
reduced accuracy (i.e., in the range of a few meters), it does not work well in
indoor environments (and not at all in certain cases such as tunnels, mines,
etc.) due to the very weak signal and no direct access to the satellites. On the
other hand, the light-based system known as a visible light positioning (VLP)
system, as part of the OWC systems, uses the pre-existing light-emitting
diodes (LEDs)-based lighting infrastructure, could be used at low cost and
high accuracy compared with the RF-based systems. VLP is an emerging
technology promising high accuracy, high security, low deployment cost,
shorter time response, and low relative complexity when compared with RFbased
positioning.
However, in indoor VLP systems, there are some concerns such as,
multipath reflection, transmitter tilting, transmitter’s position, and orientation
uncertainty, human shadowing/blocking, and noise causing the increase in
the positioning error, thereby reducing the positioning accuracy of the system.
Therefore, it is imperative to capture the characteristics of different VLP
channel and properly model them for the dual purpose of illumination and
localization. In this thesis, firstly, the impact of transmitter tilting angles and
multipath reflections are studied and for the first time, it is demonstrated that
tilting the transmitter can be beneficial in VLP systems considering both line of
sight (LOS) and non-line of sight transmission paths. With the transmitters
oriented towards the center of the receiving plane, the received power level is
maximized due to the LOS components. It is also shown that the proposed
scheme offers a significant accuracy improvement of up to ~66% compared
with a typical non-tilted transmitter VLP. The effect of tilting the transmitter on
the lighting uniformity is also investigated and results proved that the
uniformity achieved complies with the European Standard EN 12464-1.
After that, the impact of transmitter position and orientation uncertainty on
the accuracy of the VLP system based on the received signal strength (RSS)
is investigated. Simulation results show that the transmitter uncertainties have
a severe impact on the positioning error, which can be leveraged through the
usage of more transmitters. Concerning a smaller transmitter’s position
epochs, and the size of the training set. It is shown that,
the ANN with Bayesian regularization outperforms the traditional RSS
technique using the non-linear least square estimation for all values of signal
to noise ratio.
Furthermore, a novel indoor VLP system is proposed based on support
vector machines and polynomial regression considering two different
multipath environments of an empty room and a furnished room. The results
show that, in an empty room, the positioning accuracy improvement for the
positioning error of 2.5 cm are 36.1, 58.3, and 72.2 % for three different
scenarios according to the regions’ distribution in the room. For the furnished
room, a positioning relative accuracy improvement of 214, 170, and 100 % is
observed for positioning error of 0.1, 0.2, and 0.3 m, respectively. Ultimately,
an indoor VLP system based on convolutional neural networks (CNN) is
proposed and demonstrated experimentally in which LEDs are used as
transmitters and a rolling shutter camera is used as receiver. A detection
algorithm named single shot detector (SSD) is used which relies on CNN (i.e.,
MobileNet or ResNet) for classification as well as position estimation of each
LED in the image. The system is validated using a real-world size test setup
containing eight LED luminaries. The obtained results show that the maximum
average root mean square positioning error achieved is 4.67 and 5.27 cm with
SSD MobileNet and SSD ResNet models, respectively. The validation results
show that the system can process 67 images per second, allowing real-time
positioning.A procura por sistemas de posicionamento interior (IPSs) de alta precisão tem
crescido rapidamente devido ao seu interesse nas técnicas cada vez mais
populares da Internet das Coisas, dispositivos móveis inteligentes e
inteligência artificial. O IPS tornou-se um domínio de pesquisa promissor que
tem atraído grande atenção devido aos seus benefícios em vários cenários de
trabalho, como indústrias, locais públicos e navegação autónoma. Além disso,
o IPS tem uma contribuição destacada no dia a dia de organizações, como,
centros de saúde, aeroportos, supermercados, fábricas, locais subterrâneos,
etc. As tecnologias baseadas em radiofrequência (RF) e comunicação óptica
sem fio (OWC) podem ser adotadas para localização em ambientes interiores.
Embora o sistema de posicionamento global (GPS) baseado em RF ofereça
taxas de penetração mais altas com precisão reduzida (ou seja, na faixa de
alguns metros), não funciona bem em ambientes interiores (e não funciona
bem em certos casos como túneis, minas, etc.) devido ao sinal muito fraco e
falta de acesso direto aos satélites. Por outro lado, o sistema baseado em luz
conhecido como sistema de posicionamento de luz visível (VLP), como parte
dos sistemas OWC, usa a infraestrutura de iluminação baseada em díodos
emissores de luz (LEDs) pré-existentes, é um sistemas de baixo custo e alta
precisão quando comprado com os sistemas baseados em RF. O VLP é uma
tecnologia emergente que promete alta precisão, alta segurança, baixo custo
de implantação, menor tempo de resposta e baixa complexidade relativa
quando comparado ao posicionamento baseado em RF.
No entanto, os sistemas VLP interiores, exibem algumas limitações, como, a
reflexão multicaminho, inclinação do transmissor, posição do transmissor e
incerteza de orientação, sombra/bloqueio humano e ruído, que têm como
consequência o aumento do erro de posicionamento, e consequente redução
da precisão do sistema. Portanto, é imperativo estudar as características dos
diferentes canais VLP e modelá-los adequadamente para o duplo propósito de
iluminação e localização. Esta tesa aborda, primeiramente, o impacto dos
ângulos de inclinação do transmissor e reflexões multipercurso no
desempenho do sistema de posicionamento. Demonstra-se que a inclinação
do transmissor pode ser benéfica em sistemas VLP considerando tanto a linha
de vista (LOS) como as reflexões. Com os transmissores orientados para o
centro do plano recetor, o nível de potência recebido é maximizado devido aos
componentes LOS. Também é mostrado que o esquema proposto oferece
uma melhoria significativa de precisão de até ~66% em comparação com um
sistema VLP de transmissor não inclinado típico. O efeito da inclinação do
transmissor na uniformidade da iluminação também é investigado e os
resultados comprovam que a uniformidade alcançada está de acordo com a
Norma Europeia EN 12464-1.
O impacto da posição do transmissor e incerteza de orientação na precisão
do sistema VLP com base na intensidade do sinal recebido (RSS) foi também investigado. Os resultados da simulação mostram que as incertezas do
transmissor têm um impacto severo no erro de posicionamento, que pode ser
atenuado com o uso de mais transmissores. Para incertezas de
posicionamento dos transmissores menores que 5 cm, os erros médios de
posicionamento são 23.3, 15.1 e 13.2 cm para conjuntos de 4, 9 e 16
transmissores, respetivamente. Enquanto que, para a incerteza de orientação
de um transmissor menor de 5°, os erros médios de posicionamento são 31.9,
20.6 e 17 cm para conjuntos de 4, 9 e 16 transmissores, respetivamente.
O trabalho da tese abordou a investigação dos aspetos de projeto de um
sistema VLP indoor no qual uma rede neuronal artificial (ANN) é utilizada para
estimativa de posicionamento considerando um canal multipercurso. O estudo
considerou a influência do ruído como indicador de desempenho para a
comparação entre diferentes abordagens de projeto. Três algoritmos de treino
de ANNs diferentes foram considerados, a saber, Levenberg-Marquardt,
regularização Bayesiana e algoritmos de gradiente conjugado escalonado,
para minimizar o erro de posicionamento no sistema VLP. O projeto da ANN foi
otimizado com base no número de neurónios nas camadas ocultas, no número
de épocas de treino e no tamanho do conjunto de treino. Mostrou-se que, a
ANN com regularização Bayesiana superou a técnica RSS tradicional usando
a estimação não linear dos mínimos quadrados para todos os valores da
relação sinal-ruído.
Foi proposto um novo sistema VLP indoor baseado em máquinas de vetores
de suporte (SVM) e regressão polinomial considerando dois ambientes
interiores diferentes: uma sala vazia e uma sala mobiliada. Os resultados
mostraram que, numa sala vazia, a melhoria da precisão de posicionamento
para o erro de posicionamento de 2.5 cm são 36.1, 58.3 e 72.2% para três
cenários diferentes de acordo com a distribuição das regiões na sala. Para a
sala mobiliada, uma melhoria de precisão relativa de posicionamento de 214,
170 e 100% é observada para erro de posicionamento de 0.1, 0.2 e 0.3 m,
respetivamente.
Finalmente, foi proposto um sistema VLP indoor baseado em redes neurais
convolucionais (CNN). O sistema foi demonstrado experimentalmente usando
luminárias LED como transmissores e uma camara com obturador rotativo
como recetor. O algoritmo de detecção usou um detector de disparo único
(SSD) baseado numa CNN pré configurada (ou seja, MobileNet ou ResNet)
para classificação. O sistema foi validado usando uma configuração de teste
de tamanho real contendo oito luminárias LED. Os resultados obtidos
mostraram que o erro de posicionamento quadrático médio alcançado é de
4.67 e 5.27 cm com os modelos SSD MobileNet e SSD ResNet,
respetivamente. Os resultados da validação mostram que o sistema pode
processar 67 imagens por segundo, permitindo o posicionamento em tempo
real.Programa Doutoral em Engenharia Eletrotécnic
Position and Orientation Estimation through Millimeter Wave MIMO in 5G Systems
Millimeter wave signals and large antenna arrays are considered enabling
technologies for future 5G networks. While their benefits for achieving
high-data rate communications are well-known, their potential advantages for
accurate positioning are largely undiscovered. We derive the Cram\'{e}r-Rao
bound (CRB) on position and rotation angle estimation uncertainty from
millimeter wave signals from a single transmitter, in the presence of
scatterers. We also present a novel two-stage algorithm for position and
rotation angle estimation that attains the CRB for average to high
signal-to-noise ratio. The algorithm is based on multiple measurement vectors
matching pursuit for coarse estimation, followed by a refinement stage based on
the space-alternating generalized expectation maximization algorithm. We find
that accurate position and rotation angle estimation is possible using signals
from a single transmitter, in either line-of- sight, non-line-of-sight, or
obstructed-line-of-sight conditions.Comment: The manuscript has been revised, and increased from 27 to 31 pages.
Also, Fig.2, Fig. 10 and Table I are adde
Sensing User's Activity, Channel, and Location with Near-Field Extra-Large-Scale MIMO
This paper proposes a grant-free massive access scheme based on the
millimeter wave (mmWave) extra-large-scale multiple-input multiple-output
(XL-MIMO) to support massive Internet-of-Things (IoT) devices with low latency,
high data rate, and high localization accuracy in the upcoming sixth-generation
(6G) networks. The XL-MIMO consists of multiple antenna subarrays that are
widely spaced over the service area to ensure line-of-sight (LoS)
transmissions. First, we establish the XL-MIMO-based massive access model
considering the near-field spatial non-stationary (SNS) property. Then, by
exploiting the block sparsity of subarrays and the SNS property, we propose a
structured block orthogonal matching pursuit algorithm for efficient active
user detection (AUD) and channel estimation (CE). Furthermore, different
sensing matrices are applied in different pilot subcarriers for exploiting the
diversity gains. Additionally, a multi-subarray collaborative localization
algorithm is designed for localization. In particular, the angle of arrival
(AoA) and time difference of arrival (TDoA) of the LoS links between active
users and related subarrays are extracted from the estimated XL-MIMO channels,
and then the coordinates of active users are acquired by jointly utilizing the
AoAs and TDoAs. Simulation results show that the proposed algorithms outperform
existing algorithms in terms of AUD and CE performance and can achieve
centimeter-level localization accuracy.Comment: Submitted to IEEE Transactions on Communications, Major revision.
Codes will be open to all on https://gaozhen16.github.io/ soo
Recent Advances in Indoor Localization Systems and Technologies
Despite the enormous technical progress seen in the past few years, the maturity of indoor localization technologies has not yet reached the level of GNSS solutions. The 23 selected papers in this book present the recent advances and new developments in indoor localization systems and technologies, propose novel or improved methods with increased performance, provide insight into various aspects of quality control, and also introduce some unorthodox positioning methods
- …