Real-Time Implementation of Spectrum Sensing Techniques in Cognitive Radios

Wireless communication requirements of higher sampling frequencies and bandwidth are ever increasing. For this purpose, exploitation of underutilized spectrum bands was one the challenging research targets. Cognitive Radio (CR) is a promising solution to overcome the “limited bandwidth” issue. Software defined radio (SDR) is the enabler of CR. The aim of the thesis is to adopt the vacant TV channels for secondary users. Spectrum sensing prototype has been proposed to detect TV white space (TVWS). The prototype has been developed using Universal Software Radio Peripheral (USRP) and examined to sense TVWS in the real time world. The conducting analysis of obtained measurements showed the state of unoccupied spectrum bands in the UHF band ranges from 500 MHz to 698 MHz in the urban area ofWindsor, Ontario, Canada. Two different spectrum sensing techniques namely, the energy detector, and pilot-tone detector were employed to get the result with minimum computational complexity. Experiments show that the presence of incumbent users can be easily detected using the spectrum sensing techniques mentioned in the thesis. The experimental results have demonstrated the validity of the proposed prototyp

Automatic weld torch guidance control system

A highly reliable, fully digital, closed circuit television optical, type automatic weld seam tracking control system was developed. This automatic tracking equipment is used to reduce weld tooling costs and increase overall automatic welding reliability. The system utilizes a charge injection device digital camera which as 60,512 inidividual pixels as the light sensing elements. Through conventional scanning means, each pixel in the focal plane is sequentially scanned, the light level signal digitized, and an 8-bit word transmitted to scratch pad memory. From memory, the microprocessor performs an analysis of the digital signal and computes the tracking error. Lastly, the corrective signal is transmitted to a cross seam actuator digital drive motor controller to complete the closed loop, feedback, tracking system. This weld seam tracking control system is capable of a tracking accuracy of + or - 0.2 mm, or better. As configured, the system is applicable to square butt, V-groove, and lap joint weldments

Development and test of video systems for airborne surveillance of oil spills

Five video systems - potentially useful for airborne surveillance of oil spills - were developed, flight tested, and evaluated. The systems are: (1) conventional black and white TV, (2) conventional TV with false color, (3) differential TV, (4) prototype Lunar Surface TV, and (5) field sequential TV. Wavelength and polarization filtering were utilized in all systems. Greatly enhanced detection of oil spills, relative to that possible with the unaided eye, was achieved. The most practical video system is a conventional TV camera with silicon-diode-array image tube, filtered with a Corning 7-54 filter and a polarizer oriented with its principal axis in the horizontal direction. Best contrast between oil and water was achieved when winds and sea states were low. The minimum detectable oil film thickness was about 0.1 micrometer

Research pressure instrumentation for NASA Space Shuttle main engine, modification no. 5

The objective of the research project described is to define and demonstrate methods to advance the state of the art of pressure sensors for the space shuttle main engine (SSME). Silicon piezoresistive technology was utilized in completing tasks: generation and testing of three transducer design concepts for solid state applications; silicon resistor characterization at cryogenic temperatures; experimental chip mounting characterization; frequency response optimization and prototype design and fabrication. Excellent silicon sensor performance was demonstrated at liquid nitrogen temperature. A silicon resistor ion implant dose was customized for SSME temperature requirements. A basic acoustic modeling software program was developed as a design tool to evaluate frequency response characteristics

Efficient TV white space filter bank transceiver

Future devices operating in the TV white space (TVWS) spectrum will require to access different bands at different locations and times in order to avoid interference to incumbent users, requiring agility and sufficient spectral masks to satisfy regulators. Further, with very high-speed ADCs and DACs becoming reality, the purpose of this paper is to present a transceiver front-end capable of simultaneously up- and downconverting a significant portion of the UHF band. The proposed approach takes a two-stage filter-bank conversion for implementation on state-of-the-art FPGAs. We present three different parameterisations, which are compatible with the 40 TVWS channels between 470 and 790MHz in Europe, and compare them in terms of complexity and latency