Doctor of Philosophy

dissertationAsynchronous design has a very promising potential even though it has largely received a cold reception from industry. Part of this reluctance has been due to the necessity of custom design languages and computer aided design (CAD) flows to design, optimize, and validate asynchronous modules and systems. Next generation asynchronous flows should support modern programming languages (e.g., Verilog) and application specific integrated circuits (ASIC) CAD tools. They also have to support multifrequency designs with mixed synchronous (clocked) and asynchronous (unclocked) designs. This work presents a novel relative timing (RT) based methodology for generating multifrequency designs using synchronous CAD tools and flows. Synchronous CAD tools must be constrained for them to work with asynchronous circuits. Identification of these constraints and characterization flow to automatically derive the constraints is presented. The effect of the constraints on the designs and the way they are handled by the synchronous CAD tools are analyzed and reported in this work. The automation of the generation of asynchronous design templates and also the constraint generation is an important problem. Algorithms for automation of reset addition to asynchronous circuits and power and/or performance optimizations applied to the circuits using logical effort are explored thus filling an important hole in the automation flow. Constraints representing cyclic asynchronous circuits as directed acyclic graphs (DAGs) to the CAD tools is necessary for applying synchronous CAD optimizations like sizing, path delay optimizations and also using static timing analysis (STA) on these circuits. A thorough investigation for the requirements of cycle cutting while preserving timing paths is presented with an algorithm to automate the process of generating them. A large set of designs for 4 phase handshake protocol circuit implementations with early and late data validity are characterized for area, power and performance. Benchmark circuits with automated scripts to generate various configurations for better understanding of the designs are proposed and analyzed. Extension to the methodology like addition of scan insertion using automatic test pattern generation (ATPG) tools to add testability of datapath in bundled data asynchronous circuit implementations and timing closure approaches are also described. Energy, area, and performance of purely asynchronous circuits and circuits with mixed synchronous and asynchronous blocks are explored. Results indicate the benefits that can be derived by generating circuits with asynchronous components using this methodology

Automatic test pattern generation for asynchronous circuits

The testability of integrated circuits becomes worse with transistor dimensions reaching nanometer scales. Testing, the process of ensuring that circuits are fabricated without defects, becomes inevitably part of the design process; a technique called design for test (DFT). Asynchronous circuits have a number of desirable properties making them suitable for the challenges posed by modern technologies, but are severely limited by the unavailability of EDA tools for DFT and automatic test-pattern generation (ATPG). This thesis is motivated towards developing test generation methodologies for asynchronous circuits. In total four methods were developed which are aimed at two different fault models: stuck-at faults at the basic logic gate level and transistor-level faults. The methods were evaluated using a set of benchmark circuits and compared favorably to previously published work. First, ABALLAST is a partial-scan DFT method adapting the well-known BALLAST technique for asynchronous circuits where balanced structures are used to guide the selection of the state-holding elements that will be scanned. The test inputs are automatically provided by a novel test pattern generator, which uses time frame unrolling to deal with the remaining, non-scanned sequential C-elements. The second method, called AGLOB, uses algorithms from strongly-connected components in graph graph theory as a method for finding the optimal position of breaking the loops in the asynchronous circuit and adding scan registers. The corresponding ATPG method converts cyclic circuits into acyclic for which standard tools can provide test patterns. These patterns are then automatically converted for use in the original cyclic circuits. The third method, ASCP, employs a new cycle enumeration method to find the loops present in a circuit. Enumerated cycles are then processed using an efficient set covering heuristic to select the scan elements for the circuit to be tested.Applying these methods to the benchmark circuits shows an improvement in fault coverage compared to previous work, which, for some circuits, was substantial. As no single method consistently outperforms the others in all benchmarks, they are all valuable as a designer’s suite of tools for testing. Moreover, since they are all scan-based, they are compatible and thus can be simultaneously used in different parts of a larger circuit. In the final method, ATRANTE, the main motivation of developing ATPG is supplemented by transistor level test generation. It is developed for asynchronous circuits designed using a State Transition Graph (STG) as their specification. The transistor-level circuit faults are efficiently mapped onto faults that modify the original STG. For each potential STG fault, the ATPG tool provides a sequence of test vectors that expose the difference in behavior to the output ports. The fault coverage obtained was 52-72 % higher than the coverage obtained using the gate level tests. Overall, four different design for test (DFT) methods for automatic test pattern generation (ATPG) for asynchronous circuits at both gate and transistor level were introduced in this thesis. A circuit extraction method for representing the asynchronous circuits at a higher level of abstraction was also implemented. Developing new methods for the test generation of asynchronous circuits in this thesis facilitates the test generation for asynchronous designs using the CAD tools available for testing the synchronous designs. Lessons learned and the research questions raised due to this work will impact the future work to probe the possibilities of developing robust CAD tools for testing the future asynchronous designs

Energy-Efficient Digital Circuit Design using Threshold Logic Gates

abstract: Improving energy efficiency has always been the prime objective of the custom and automated digital circuit design techniques. As a result, a multitude of methods to reduce power without sacrificing performance have been proposed. However, as the field of design automation has matured over the last few decades, there have been no new automated design techniques, that can provide considerable improvements in circuit power, leakage and area. Although emerging nano-devices are expected to replace the existing MOSFET devices, they are far from being as mature as semiconductor devices and their full potential and promises are many years away from being practical. The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation. Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR. Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths. Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Determination of a Graph\u27s Chromatic Number for Part Consolidation in Axiomatic Design

Mechanical engineering design practices are increasingly moving towards a framework called axiomatic design (AD). A key tenet of AD is to decrease the information content of a design in order to increase the chance of manufacturing success. An important way to decrease information content is to fulfill multiple functional requirements (FRs) by a single part: a process known as part consolidation. One possible method for determining the minimum number of required parts is to represent a design by a graph, where the vertices are the FRs and the edges represent the need to separate their endpoint FRs into separate parts. The answer is then the chromatic number of such a graph. This research investigates the suitability of using two existing algorithms and a new algorithm for finding the chromatic number of a graph in a part consolidation tool that can be used by designers. The runtime complexities and durations of the algorithms are compared empirically using the results from a random graph analysis with binomial edge probability. It was found that even though the algorithms are quite different, they all execute in the same amount of time and are suitable for use in the desired design tool

Feedback message passing for inference in Gaussian graphical models

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Includes bibliographical references (p. 89-92).For Gaussian graphical models with cycles, loopy belief propagation often performs reasonably well, but its convergence is not guaranteed and the computation of variances is generally incorrect. In this paper, we identify a set of special vertices called a feedback vertex set whose removal results in a cycle-free graph. We propose a feedback message passing algorithm in which non-feedback nodes send out one set of messages while the feedback nodes use a different message update scheme. Exact inference results can be obtained in O(k²n), where k is the number of feedback nodes and n is the total number of nodes. For graphs with large feedback vertex sets, we describe a tractable approximate feedback message passing algorithm. Experimental results show that this procedure converges more often, faster, and provides better results than loopy belief propagation.by Ying Liu.S.M

Supervised Design-Space Exploration

Low-cost Very Large Scale Integration (VLSI) electronics have revolutionized daily life and expanded the role of computation in science and engineering. Meanwhile, process-technology scaling has changed VLSI design to an exploration process that strives for the optimal balance among multiple objectives, such as power, performance, and area, i.e. multi-objective Pareto-set optimization. Besides, modern VLSI design has shifted to synthesis-centric methodologies in order to boost the design productivity, which leads to better design quality given limited time and resources. However, current decade-old synthesis-centric design methodologies suffer from: (i) long synthesis tool runtime, (ii) elusive optimal setting of many synthesis knobs, (iii) limitation to one design implementation per synthesis run, and (iv) limited capability of digesting only component-level designs as opposed to holistic system-wide synthesis. These challenges make Design Space Exploration (DSE) with synthesis tools a daunting task for both novice and experienced VLSI designers, thus stagnating the development of more powerful (i.e. more complex) computer systems. To address these challenges, I propose Supervised Design-Space Exploration (SDSE), an abstraction layer between a designer and a synthesis tool, aiming to autonomously supervise synthesis jobs for DSE. For system-level exploration, SDSE can approximate a system Pareto set given limited information: only lightweight component characterization is required, yet the necessary component synthesis jobs are discovered on-the-fly in order to compose the system Pareto set. For component-level exploration, SDSE can approximate a component Pareto set by iteratively refining the approximation with promising knob settings, guided by synthesis-result estimation with machine-learning models. Combined, SDSE has been applied with the three major synthesis stages, namely high-level, logic, and physical synthesis, to the design of heterogeneous accelerator cores as well as high-performance processor cores. In particular, SDSE has been successfully integrated into the IBM Synthesis Tuning System, yielding 20% better circuit performance than the original system on the design of a 22nm server processor that is currently in production. Looking ahead, SDSE can be applied to other VLSI designs beyond the accelerator and the programmable cores. Moreover, SDSE opens several research avenues for: (i) new development and deployment platforms of synthesis tools, (ii) large-scale collaborative design engineering, and (iii) new computer-aided design approaches for new classes of systems beyond VLSI chips

Proceedings of the 22nd Conference on Formal Methods in Computer-Aided Design – FMCAD 2022

The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system verification. FMCAD provides a leading forum to researchers in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system design including verification, specification, synthesis, and testing

Tools and Algorithms for the Construction and Analysis of Systems

This open access book constitutes the proceedings of the 28th International Conference on Tools and Algorithms for the Construction and Analysis of Systems, TACAS 2022, which was held during April 2-7, 2022, in Munich, Germany, as part of the European Joint Conferences on Theory and Practice of Software, ETAPS 2022. The 46 full papers and 4 short papers presented in this volume were carefully reviewed and selected from 159 submissions. The proceedings also contain 16 tool papers of the affiliated competition SV-Comp and 1 paper consisting of the competition report. TACAS is a forum for researchers, developers, and users interested in rigorously based tools and algorithms for the construction and analysis of systems. The conference aims to bridge the gaps between different communities with this common interest and to support them in their quest to improve the utility, reliability, exibility, and efficiency of tools and algorithms for building computer-controlled systems

Cybernetic automata: An approach for the realization of economical cognition for multi-robot systems

The multi-agent robotics paradigm has attracted much attention due to the variety of pertinent applications that are well-served by the use of a multiplicity of agents (including space robotics, search and rescue, and mobile sensor networks). The use of this paradigm for most applications, however, demands economical, lightweight agent designs for reasons of longer operational life, lower economic cost, faster and easily-verified designs, etc. An important contributing factor to an agent’s cost is its control architecture. Due to the emergence of novel implementation technologies carrying the promise of economical implementation, we consider the development of a technology-independent specification for computational machinery. To that end, the use of cybernetics toolsets (control and dynamical systems theory) is appropriate, enabling a principled specifi- cation of robotic control architectures in mathematical terms that could be mapped directly to diverse implementation substrates. This dissertation, hence, addresses the problem of developing a technologyindependent specification for lightweight control architectures to enable robotic agents to serve in a multi-agent scheme. We present the principled design of static and dynamical regulators that elicit useful behaviors, and integrate these within an overall architecture for both single and multi-agent control. Since the use of control theory can be limited in unstructured environments, a major focus of the work is on the engineering of emergent behavior. The proposed scheme is highly decentralized, requiring only local sensing and no inter-agent communication. Beyond several simulation-based studies, we provide experimental results for a two-agent system, based on a custom implementation employing field-programmable gate arrays

Annals of Scientific Society for Assembly, Handling and Industrial Robotics

This Open Access proceedings present a good overview of the current research landscape of industrial robots. The objective of MHI Colloquium is a successful networking at academic and management level. Thereby the colloquium is focussing on a high level academic exchange to distribute the obtained research results, determine synergetic effects and trends, connect the actors personally and in conclusion strengthen the research field as well as the MHI community. Additionally there is the possibility to become acquainted with the organizing institute. Primary audience are members of the scientific association for assembly, handling and industrial robots (WG MHI)