Performance and energy efficiency in wireless self-organized networks

fi=vertaisarvioitu|en=peerReviewed

Design and evaluation of wireless dense networks : application to in-flight entertainment systems

Le réseau sans fil est l'un des domaines de réseautage les plus prometteurs avec des caractéristiques uniques qui peuvent fournir la connectivité dans les situations où il est difficile d'utiliser un réseau filaire, ou lorsque la mobilité des nœuds est nécessaire. Cependant, le milieu de travail impose généralement diverses contraintes, où les appareils sans fil font face à différents défis lors du partage des moyens de communication. De plus, le problème s'aggrave avec l'augmentation du nombre de nœuds. Différentes solutions ont été introduites pour faire face aux réseaux très denses. D'autre part, un nœud avec une densité très faible peut créer un problème de connectivité et peut conduire à l'optension de nœuds isolés et non connectes au réseau. La densité d'un réseau est définit en fonction du nombre de nœuds voisins directs au sein de la portée de transmission du nœud. Cependant, nous croyons que ces métriques ne sont pas suffisants et nous proposons une nouvelle mesure qui considère le nombre de voisins directs et la performance du réseau. Ainsi, la réponse du réseau, respectant l'augmentation du nombre de nœuds, est considérée lors du choix du niveau de la densité. Nous avons défini deux termes: l'auto-organisation et l'auto-configuration, qui sont généralement utilisés de façon interchangeable dans la littérature en mettant en relief la différence entre eux. Nous estimons qu'une définition claire de la terminologie peut éliminer beaucoup d'ambiguïté et aider à présenter les concepts de recherche plus clairement. Certaines applications, telles que Ies systèmes "In-Flight Entertainment (IFE)" qui se trouvent à l'intérieur des cabines d'avions, peuveut être considérées comme des systèmes sans fil de haute densité, même si peu de nœuds sont relativement présents. Pour résoudre ce problème, nous proposons une architecture hétérogène de différentes technologies à fin de surmonter les contraintes spécifiques de l'intérieur de la cabine. Chaque technologie vise à résoudre une partie du problème. Nous avons réalisé diverses expérimentations et simulations pour montrer la faisabilité de l'architecture proposée. Nous avons introduit un nouveau protocole d'auto-organisation qui utilise des antennes intelligentes pour aider certains composants du système IFE; à savoir les unités d'affichage et leurs systèmes de commande, à s'identifier les uns les autres sans aucune configuration préliminaire. Le protocole a été conçu et vérifié en utilisant le langage UML, puis, un module de NS2 a été créé pour tester les différents scénarios.Wireless networking is one of the most challenging networking domains with unique features that can provide connectivity in situations where it is difficult to use wired networking, or when ! node mobility is required. However, the working environment us! ually im poses various constrains, where wireless devices face various challenges when sharing the communication media. Furthermore, the problem becomes worse when the number of nodes increase. Different solutions were introduced to cope with highly dense networks. On the other hand, a very low density can create a poor connectivity problem and may lead to have isolated nodes with no connection to the network. It is common to define network density according to the number of direct neighboring nodes within the node transmission range. However, we believe that such metric is not enough. Thus, we propose a new metric that encompasses the number of direct neighbors and the network performance. In this way, the network response, due to the increasing number of nodes, is considered when deciding the density level. Moreover, we defined two terms, self-organization and self-configuration, which are usually used interchangeably in the literature through highlighting the difference ! between them. We believe that having a clear definition for terminology can eliminate a lot of ambiguity and help to present the research concepts more clearly. Some applications, such as In-Flight Entertainment (IFE) systems inside the aircraft cabin, can be considered as wirelessly high dense even if relatively few nodes are present. To solve this problem, we propose a heterogeneous architecture of different technologies to overcome the inherited constrains inside the cabin. Each technology aims at solving a part of the problem. We held various experimentation and simulations to show the feasibility of the proposed architecture

ENERGY CONSERVATION FOR WIRELESS AD HOC ROUTING

Self-configuring wireless ad hoc networks have attracted considerable attention in the last few years due to their valuable civil and military applications. One aspect of such networks that has been studied insufficiently is the energy efficiency. Energy efficiency is crucial to prolong the network lifetime and thus make the network more survivable.Nodes in wireless ad hoc networks are most likely to be driven by battery and hence operate on an extremely frugal energy budget. Conventional ad hoc routing protocols are focused on handling the mobility instead of energy efficiency. Energy efficient routing strategies proposed in literature either do not take advantage of sleep modes to conserve energy more efficiently, or incur much overhead in terms of control message and computing complexity to schedule sleep modes and thus are not scalable.In this dissertation, a novel strategy is proposed to manage the sleep of the nodes in the network so that energy can be conserved and network connectivity can be kept. The novelty of the strategy is its extreme simplicity. The idea is derived from the results of the percolation theory, typically called gossiping. Gossiping is a convenient and effective approach and has been successfully applied to several areas of the networking. In the proposed work, we will developa sleep management protocol from gossiping for both static and mobile wireless ad hoc networks. Then the protocol will be extended to the asynchronous network, where nodes manage their own states independently. Analysis and simulations will be conducted to show thecorrectness, effectiveness and efficiency of the proposed work. The comparison between analytical and simulation results will justify them for each other. We will investigate the most important performance aspects concerning the proposed strategy, including the effect ofparameter tuning and the impacts of routing protocols. Furthermore, multiple extensions will be developed to improve the performance and make the proposed strategy apply to different network scenarios

Esquema de controlo para redes multicast baseadas com classes

Doutoramento em Engenharia ElectrotécnicaThe expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.À medida que as Tecnologias de Informação (TIs) se tornaram parte integrante da nossa sociedade, a expectativa dos cidadãos relativamente ao uso desses serviços também demonstrou um aumento, seja no âmbito das atividades profissionais, de lazer, aplicações de segurança crítica ou negócios. Portanto, as limitações dos projetos de rede tradicionais quanto ao fornecimento de serviços inovadores e aplicações avançadas motivaram um consenso quanto à integração de todos os serviços e infra-estruturas de comutação de pacotes, utilizando o IP, de modo a extrair benefícios económicos e um controlo mais flexível nas Redes de Nova Geração (RNG). Entretanto, tendo em vista que a Internet não apresenta capacidade de diferenciação de serviços, e sabendo que cada serviço apresenta as suas necessidades próprias, como por exemplo, a Qualidade de Serviço - QoS, a necessidade de formas mais evoluídas de comunicação tem-se tornado cada vez mais visível, levando a mudanças radicais na arquitectura das redes, que exigem soluções adequadas para a admissão de serviços e controlo de recursos de rede. Sendo assim, este trabalho aborda questões de controlo de QoS e rede com o objetivo de melhorar o desempenho do controlo de recursos total em redes atuais e futuras, através da análise dos serviços de acordo com as suas classes de serviço. Esta Tese encontra-se dividida em três partes. Na primeira parte são propostos dois algoritmos de sobre-reserva, o Class-based bandwidth Over-Reservation (COR) e uma extensão melhorada do COR denominado de Enhanced COR (ECOR). A sobre-reserva significa a reserva de uma largura de banda maior para o serviço em questão do que uma classe de serviço (CoS) necessita e, portanto, a quantidade de sinalização para reserva de recursos é reduzida. COR e ECOR consideram uma definição dinâmica de sobre-reserva de parâmetros para CoSs com base nas condições da rede, com vista à redução da sobrecarga de sinalização em QoS sem que ocorra desperdício de largura de banda. O ECOR, por sua vez, difere do COR por permitir a otimização com minimização de controlo de overhead. Além disso, nesta Tese é proposto também um mecanismo de controlo centralizado chamado Advanced Centralization Architecture (ACA) , usando um único Ponto de Controlo de Decisão (CDP) que mantém uma visão ampla da topologia de rede e de análise dos recursos ocupados em tempo real como base de controlo para a rede global. Nesta Tese são utilizadas árvores multicast como base para o transporte de sessão, não só para fins de comunicação em grupo, mas principalmente para que os pacotes que pertençam a uma sessão que é mapeada numa determinada árvore sigam o seu caminho. Os resultados obtidos nas simulações dos mecanismos mostram uma redução significativa da sobrecarga da sinalização de controlo, sem a violação dos requisitos de QoS ou desperdício de recursos. Além disso, foi proposto um modelo analítico no sentido de avaliar o impacto provocado por diversos parâmetros (como por exemplo, a capacidade da ligação, a dinâmica das sessões, etc), no sobre-provisionamento dos recursos. Na segunda parte desta tese propôe-se um mecanismo para controlo descentralizado de recursos denominado de Advanced Class-based resource OverprRovisioning (ACOR), que permite obter uma melhor escalabilidade do que o obtido pelo ACA. O ACOR permite que os pontos de decisão e controlo da rede, os CDPs, sejam distribuídos na periferia da rede, cooperem entre si, através da troca de dados e controlo adequados (por exemplo, localização das árvores e informações sobre o uso da largura de banda), de tal forma que cada CDP seja capaz de manter um bom conhecimento da topologia da rede, bem como das suas ligações. Do ponto de vista de escalabilidade, a cooperação do ACOR é seletiva, o que significa que as informações de controlo são trocadas de forma dinâmica apenas entre os CDPs analisados. Além disso, a sincronização é feita através do conceito proposto de Recursos Virtuais Sobre-Provisionado (VOPR), que partilha as reservas de cada interface para cada árvore que usa a interface. Assim, cada CDP pode processar pedidos de sessão numa ou mais árvores, sem a necessidade de sincronização entre os CDPs correlacionados, enquanto o VOPR da árvore não estiver esgotado. Os resultados analíticos e de simulação demonstram que o controlo de sobre-reserva é agregado em cenários descentralizados, mantendo a sinalização de QoS baixa sem perda de largura de banda. Também é desenvolvido um protocolo de controlo de sinalização chamado ACOR Protocol (ACOR-P) para suportar as arquitecturas de centralização e descentralização deste trabalho. O ACOR Estendido (E-ACOR) agrega a VOPR de todas as árvores que se originam no mesmo CDP, e mais pedidos de sessão podem ser processados sem a necessidade de sincronização quando comparado com ACOR. Além disso, E-ACOR introduz um mecanismo para controlar as informações àcerca do congestionamento da rede, e impede a sincronização desnecessária durante o tempo de congestionamento quando os VOPRs esgotam consoante cada pedido de sessão. A avaliação de desempenho, através de resultados analíticos e de simulação, mostra a superioridade do E-ACOR em minimizar o controlo geral da carga da sinalização, mantendo todas as vantagens do ACOR, sem apresentar violações de QoS ou desperdício de recursos. A última parte desta Tese inclui a proposta para recuperação a falhas, o Survivability ACOR (SACOR), o qual permite ter QoS estável em caso de falhas de ligações e nós. Os resultados de desempenho analisados mostram uma capacidade flexível de sobrevivência caracterizada por um tempo de convergência rápido e diferenciação de tráfego com uma utilização eficiente dos recursos. Em resumo, os mecanismos de controlo de recursos propostos nesta Tese fornecem um suporte eficiente e escalável para controlo da rede, como também para os seus principais sub-sistemas (por exemplo, QoS, controlo de recursos, engenharia de tráfego, multicast, etc) e, assim, permitir a otimização do desempenho da rede a nível do controlo global

Cross-layer energy optimisation of routing protocols in wireless sensor networks

Recent technological developments in embedded systems have led to the emergence of a new class of networks, known asWireless Sensor Networks (WSNs), where individual nodes cooperate wirelessly with each other with the goal of sensing and interacting with the environment.Many routing protocols have been developed tomeet the unique and challenging characteristics of WSNs (notably very limited power resources to sustain an expected lifetime of perhaps years, and the restricted computation, storage and communication capabilities of nodes that are nonetheless required to support large networks and diverse applications). No standards for routing have been developed yet for WSNs, nor has any protocol gained a dominant position among the research community. Routing has a significant influence on the overall WSN lifetime, and providing an energy efficient routing protocol remains an open problem. This thesis addresses the issue of designing WSN routing methods that feature energy efficiency. A common time reference across nodes is required in mostWSN applications. It is needed, for example, to time-stamp sensor samples and for duty cycling of nodes. Alsomany routing protocols require that nodes communicate according to some predefined schedule. However, independent distribution of the time information, without considering the routing algorithm schedule or network topology may lead to a failure of the synchronisation protocol. This was confirmed empirically, and was shown to result in loss of connectivity. This can be avoided by integrating the synchronisation service into the network layer with a so-called cross-layer approach. This approach introduces interactions between the layers of a conventional layered network stack, so that the routing layer may share information with other layers. I explore whether energy efficiency can be enhanced through the use of cross-layer optimisations and present three novel cross-layer routing algorithms. The first protocol, designed for hierarchical, cluster based networks and called CLEAR (Cross Layer Efficient Architecture for Routing), uses the routing algorithm to distribute time information which can be used for efficient duty cycling of nodes. The second method - called RISS (Routing Integrated Synchronization Service) - integrates time synchronization into the network layer and is designed to work well in flat, non-hierarchical network topologies. The third method - called SCALE (Smart Clustering Adapted LEACH) - addresses the influence of the intra-cluster topology on the energy dissipation of nodes. I also investigate the impact of the hop distance on network lifetime and propose a method of determining the optimal location of the relay node (the node through which data is routed in a two-hop network). I also address the problem of predicting the transition region (the zone separating the region where all packets can be received and that where no data can be received) and I describe a way of preventing the forwarding of packets through relays belonging in this transition region. I implemented and tested the performance of these solutions in simulations and also deployed these routing techniques on sensor nodes using TinyOS. I compared the average power consumption of the nodes and the precision of time synchronization with the corresponding parameters of a number of existing algorithms. All proposed schemes extend the network lifetime and due to their lightweight architecture they are very efficient on WSN nodes with constrained resources. Hence it is recommended that a cross-layer approach should be a feature of any routing algorithm for WSNs

Design and Implementation of Large-Scale Wireless Sensor Networks for Environmental Monitoring Applications

Environmental monitoring represents a major application domain for wireless sensor networks (WSN). However, despite significant advances in recent years, there are still many challenging issues to be addressed to exploit the full potential of the emerging WSN technology. In this dissertation, we introduce the design and implementation of low-power wireless sensor networks for long-term, autonomous, and near-real-time environmental monitoring applications. We have developed an out-of-box solution consisting of a suite of software, protocols and algorithms to provide reliable data collection with extremely low power consumption. Two wireless sensor networks based on the proposed solution have been deployed in remote field stations to monitor soil moisture along with other environmental parameters. As parts of the ever-growing environmental monitoring cyberinfrastructure, these networks have been integrated into the Texas Environmental Observatory system for long-term operation. Environmental measurement and network performance results are presented to demonstrate the capability, reliability and energy-efficiency of the network