1-Bit Massive MIMO Transmission: Embracing Interference with Symbol-Level Precoding

The deployment of large-scale antenna arrays for cellular base stations (BSs), termed as `Massive MIMO', has been a key enabler for meeting the ever-increasing capacity requirement for 5G communication systems and beyond. Despite their promising performance, fully-digital massive MIMO systems require a vast amount of hardware components including radio frequency chains, power amplifiers, digital-to-analog converters (DACs), etc., resulting in a huge increase in terms of the total power consumption and hardware costs for cellular BSs. Towards both spectrally-efficient and energy-efficient massive MIMO deployment, a number of hardware limited architectures have been proposed, including hybrid analog-digital structures, constant-envelope transmission, and use of low-resolution DACs. In this paper, we overview the recent interest in improving the error-rate performance of massive MIMO systems deployed with 1-bit DACs through precoding at the symbol level. This line of research goes beyond traditional interference suppression or cancellation techniques by managing interference on a symbol-by-symbol basis. This provides unique opportunities for interference-aware precoding tailored for practical massive MIMO systems. Firstly, we characterize constructive interference (CI) and elaborate on how CI can benefit the 1-bit signal design by exploiting the traditionally undesired multi-user interference as well as the interference from imperfect hardware components. Subsequently, we overview several solutions for 1-bit signal design to illustrate the gains achievable by exploiting CI. Finally, we identify some challenges and future research directions for 1-bit massive MIMO systems that are yet to be explored.Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessibl

Digital CMOS ISFET architectures and algorithmic methods for point-of-care diagnostics

Over the past decade, the surge of infectious diseases outbreaks across the globe is redefining how healthcare is provided and delivered to patients, with a clear trend towards distributed diagnosis at the Point-of-Care (PoC). In this context, Ion-Sensitive Field Effect Transistors (ISFETs) fabricated on standard CMOS technology have emerged as a promising solution to achieve a precise, deliverable and inexpensive platform that could be deployed worldwide to provide a rapid diagnosis of infectious diseases. This thesis presents advancements for the future of ISFET-based PoC diagnostic platforms, proposing and implementing a set of hardware and software methodologies to overcome its main challenges and enhance its sensing capabilities. The first part of this thesis focuses on novel hardware architectures that enable direct integration with computational capabilities while providing pixel programmability and adaptability required to overcome pressing challenges on ISFET-based PoC platforms. This section explores oscillator-based ISFET architectures, a set of sensing front-ends that encodes the chemical information on the duty cycle of a PWM signal. Two initial architectures are proposed and fabricated in AMS 0.35um, confirming multiple degrees of programmability and potential for multi-sensing. One of these architectures is optimised to create a dual-sensing pixel capable of sensing both temperature and chemical information on the same spatial point while modulating this information simultaneously on a single waveform. This dual-sensing capability, verified in silico using TSMC 0.18um process, is vital for DNA-based diagnosis where protocols such as LAMP or PCR require precise thermal control. The COVID-19 pandemic highlighted the need for a deliverable diagnosis that perform nucleic acid amplification tests at the PoC, requiring minimal footprint by integrating sensing and computational capabilities. In response to this challenge, a paradigm shift is proposed, advocating for integrating all elements of the portable diagnostic platform under a single piece of silicon, realising a ``Diagnosis-on-a-Chip". This approach is enabled by a novel Digital ISFET Pixel that integrates both ADC and memory with sensing elements on each pixel, enhancing its parallelism. Furthermore, this architecture removes the need for external instrumentation or memories and facilitates its integration with computational capabilities on-chip, such as the proposed ARM Cortex M3 system. These computational capabilities need to be complemented with software methods that enable sensing enhancement and new applications using ISFET arrays. The second part of this thesis is devoted to these methods. Leveraging the programmability capabilities available on oscillator-based architectures, various digital signal processing algorithms are implemented to overcome the most urgent ISFET non-idealities, such as trapped charge, drift and chemical noise. These methods enable fast trapped charge cancellation and enhanced dynamic range through real-time drift compensation, achieving over 36 hours of continuous monitoring without pixel saturation. Furthermore, the recent development of data-driven models and software methods open a wide range of opportunities for ISFET sensing and beyond. In the last section of this thesis, two examples of these opportunities are explored: the optimisation of image compression algorithms on chemical images generated by an ultra-high frame-rate ISFET array; and a proposed paradigm shift on surface Electromyography (sEMG) signals, moving from data-harvesting to information-focused sensing. These examples represent an initial step forward on a journey towards a new generation of miniaturised, precise and efficient sensors for PoC diagnostics.Open Acces

Signal processing using short word-length

Recently short word-length (normally 1 bit or bits) processing has become a promising technique. However, there are unresolved issues in sigma-delta modulation, which is the basis for 1b/2b systems. These issues hindered the full adoption of single-bit techniues in industry. Among these problems is the stability of high-order modulators and the limit cycle behaviour. More importantly, there is no adaptive LMS structure of any kind in 1b/2b domain. The challenge in this problem is the harsh quantization that prevents straightforward LMS application. In this thesis, the focus has been made on three axes: designing new single-bit DSP applications, proposing novel approaches for stability analysis, and tacking the unresolved problems of 1b/2b adaptive filtering. Two structures for 1b digital comb filtering are proposed. A ternary DC blocker structure is also presented and performanc e is tested. We also proposed a single-bit multiplierless DC-blocking structure. The stability of a single-bit high-order signma-delta modulator is studied under dc inputs. A new approach for stability analysis is proposed based on analogy with PLL analysis. Finally we succeeded in designing 1b/2b Wiener-like filtering and introduced (for the first time) three 1b/2b adaptive schemes

Microwave resonant sensors

Microwave resonant sensors use the spectral characterisation of a resonator to make high sensitivity measurements of material electromagnetic properties at GHz frequencies. They have been applied to a wide range of industrial and scientific measurements, and used to study a diversity of physical phenomena. Recently, a number of challenging dynamic applications have been developed that require very high speed and high performance, such as kinetic inductance detectors and scanning microwave microscopes. Others, such as sensors for miniaturised fluidic systems and non-invasive blood glucose sensors, also require low system cost and small footprint. This thesis investigates new and improved techniques for implementing microwave resonant sensor systems, aiming to enhance their suitability for such demanding tasks. This was achieved through several original contributions: new insights into coupling, dynamics, and statistical properties of sensors; a hardware implementation of a realtime multitone readout system; and the development of efficient signal processing algorithms for the extraction of sensor measurements from resonator response data. The performance of this improved sensor system was verified through a number of novel measurements, achieving a higher sampling rate than the best available technology yet with equivalent accuracy and precision. At the same time, these experiments revealed unforeseen applications in liquid metrology and precision microwave heating of miniature flow systems.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Microwave resonant sensors

Microwave resonant sensors use the spectral characterisation of a resonator to make high sensitivity measurements of material electromagnetic properties at GHz frequencies. They have been applied to a wide range of industrial and scientific measurements, and used to study a diversity of physical phenomena. Recently, a number of challenging dynamic applications have been developed that require very high speed and high performance, such as kinetic inductance detectors and scanning microwave microscopes. Others, such as sensors for miniaturised fluidic systems and non-invasive blood glucose sensors, also require low system cost and small footprint. This thesis investigates new and improved techniques for implementing microwave resonant sensor systems, aiming to enhance their suitability for such demanding tasks. This was achieved through several original contributions: new insights into coupling, dynamics, and statistical properties of sensors; a hardware implementation of a realtime multitone readout system; and the development of efficient signal processing algorithms for the extraction of sensor measurements from resonator response data. The performance of this improved sensor system was verified through a number of novel measurements, achieving a higher sampling rate than the best available technology yet with equivalent accuracy and precision. At the same time, these experiments revealed unforeseen applications in liquid metrology and precision microwave heating of miniature flow systems

Analogue filter networks: developments in theory, design and analyses

Not availabl

High-Power Comb-Line Filter Architectures for Switched-Mode RF Power Amplifier Systems

Die vorgelegte Arbeit behandelt die Analyse der Anforderungen, denschaltungstechnischen Entwurf, den Aufbau und die messtechnische Verifizierungvon Rekonstruktionsfiltern für Leistungsschaltverstärker im Klasse-SBetrieb, die auf Grund ihres hohen Wirkungsgrades vorzugsweise in MobilfunkbasisstationenVerwendung finden sollen. Die Brauchbarkeit des Entwurfeswird an Hand einer Reihe von Applikationsbeispielen anschaulich dargestellt.Als Kernforderung einer derartigen Filterauslegung hat sich die Aufrechterhaltungder Rechteckzeitfunktion des Drain-Stromes für einen (im ”CurrentMode” arbeitenden) Schaltverstärker herausgestellt, weil sonst die damit erzielbarehohe Effizienz nicht erreicht werden kann. Darüber hinaus fließen indie Filterauslegung nicht nur die Fixierung des Filterdurchlass- und sperrbereichesein, sondern auch die Festlegung der Eingangs- und Lastimpedanz bei unterschiedlichenAnregungsmoden über einen breiten Frequenzbereich. Doppelundeinzelterminierte Filter werden theoretisch betrachtet, simuliert, getestetund gemessen.Es wurde herausgearbeitet, dass die schaltungstechnischen und geometrischenAnforderungen an einen derartigen Rekonstruktionsfilterentwurf gutdurch symmetrisch gespeiste Kammleitungsfilter erfüllt werden können. VerschiedeneFilterarchitekturen werden im Hinblick auf ihr Gleich- und Gegentaktaktimpedanzverhaltenvorgestellt, experimentell untersucht und kritischanalysiert. Soweit dem Autor bekannt ist, werden hier erstmalig Rekonstruktionsfilterfür Klasse-S Leistungsverstärker im ”Current Mode” komplett analysiert.Desweiteren wird die Funktionalität des Rekonstruktionsfilters an Handanderer Typen von Leistungsschaltverstärkern simuliert und messtechnisch untersucht.Der maximale Wirkungsgrad von 65% bei Leistungsschaltverstärkersystemenlässt sich dem erfolgreichen Filterentwurf zuschreiben.This work has taken place in the context that a class-S power amplifiersystem with simplified transmitter architectures and increased power efficiencymakes an attractive candidate for cellular phone base transceiver station applications.The author describes the requirements for, and a number of successfulimplementations of, a reconstruction filter suitable for such an amplifier system.In a current-mode class-S power amplifier system, crucial to the maintenanceof the rectangular shape of the drain current and thus to high efficiency arenot only the tailoring of pass-band and stop-band, but also the specification ofinput impedance for different modes of excitation over a wide frequency range.Doubly and singly terminated filters are subjected to theoretical consideration,simulation, testing and measurement. The main focus of the research is on thedesign of the reconstruction filter.It is found that the electrical and geometrical constraints for the designof a reconstruction filter are well satisfied by balanced input comb-line filters.Several filter architectures are proposed, experimentally investigated, and criticallyanalysed in terms of differential and common mode impedances. Thisis the first complete analysis of reconstruction filters for current mode class-Spower amplifier systems, as far as the author knows. Switched-mode poweramplifier systems which include the proposed filters are also simulated andmeasured under different driving conditions. The maximum power efficiencyof 65% to date in the switched-mode power amplifier systems can be attributedto the successful filter design

Hilbert-Huang Transform: biosignal analysis and practical implementation

Any system, however trivial, is subjected to data analysis on the signals it produces. Over the last 50 years the influx of new techniques and expansions of older ones have allowed a number of new applications, in a variety of fields, to be analysed and to some degree understood. One of the industries that is benefiting from this growth is the medical field and has been further progressed with the growth of interdisciplinary collaboration. From a signal processing perspective, the challenge comes from the complex and sometimes chaotic nature of the signals that we measure from the body, such as those from the brain and to some degree the heart. In this work we will make a contribution to dealing with such systems, in the form of a recent time-frequency data analysis method, the Hilbert-Huang Transform (HHT), and extensions to it. This thesis presents an analysis of the state of the art in seizure and heart arrhythmia detection and prediction methods. We then present a novel real-time implementation of the algorithm both in software and hardware and the motivations for doing so. First, we present our software implementation, encompassing realtime capabilities and identifying elements that need to be considered for practical use. We then translated this software into hardware to aid real-time implementation and integration. With these implementations in place we apply the HHT method to the topic of epilepsy (seizures) and additionally make contributions to heart arrhythmias and neonate brain dynamics. We use the HHT and some additional algorithms to quantify features associated with each application for detection and prediction. We also quantify significance of activity in such a way as to merge prediction and detection into one framework. Finally, we assess the real-time capabilities of our methods for practical use as a biosignal analysis tool

Development of a sub-miniature acoustic sensor for wireless monitoring of heart rate

This thesis presents the development of a non-invasive, wireless, low-power, phonocardiographic (PCG) or heart sound sensor platform suitable for long-term monitoring of heart function. The core of this development process involves a study of the feasibility of this conceptual system and the development of a prototype mixed-signals integrated circuit (IC) to form the integral component of the proposed sensor. The feasibility study of the proposed long-term monitoring sensor is divided into two main parts. The first part of the study investigates the technological aspect of the conceptual system, via a system level design. This is to prove the technological or operational feasibility of the system, where the system can be built completely using discrete, off-the-shelf electronics components to satisfy the size, power consumption, battery life and operational requirements of the sensor platform. The second part of the study concentrates on the post-processing of the heart sounds and murmurs or PCG data recorded. This is where a number of different de-noising algorithms are studied and their relative performance compared when applied to a variety of different noisy heart sound signals that would likely be acquired using the proposed sensor in everyday life. This was done to demonstrate the functional feasibility of the proposed system, where the ambient acoustic noise in the recorded PCG data can be effectively suppressed and therefore meaningful analysis of heart function i.e. heart rate, can be performed on the data. After the feasibility of the conceptual system has been demonstrated, the final part of this thesis discusses the synthesis and testing of a 0.35 μm CMOS technology prototype mixed analog-digital integrated circuit (IC) to miniaturise part of this sensor platform outlined in the system level design, conducted in the earlier part of this thesis, to achieve the objective specifications – in terms of the size and power consumption. A new implementation of the multi-tanh triplet transconductor is introduced to construct a pair of 100 nW analogue 4th order Gm-C signal conditioning filters. Furthermore, a 7 μW digital circuit was designed to drive the analog-to-digital conversion cycle of the Linear Technology LTC1288 ADC and synchronise the ADC’s output to generate the Manchester encoded data compatible with the Holt Integrated Circuit HI-15530 Manchester Encoder/Decoder

Sensors, measurement fusion and missile trajectory optimisation

When considering advances in “smart” weapons it is clear that air-launched systems have adopted an integrated approach to meet rigorous requirements, whereas air-defence systems have not. The demands on sensors, state observation, missile guidance, and simulation for air-defence is the subject of this research. Historical reviews for each topic, justification of favoured techniques and algorithms are provided, using a nomenclature developed to unify these disciplines. Sensors selected for their enduring impact on future systems are described and simulation models provided. Complex internal systems are reduced to simpler models capable of replicating dominant features, particularly those that adversely effect state observers. Of the state observer architectures considered, a distributed system comprising ground based target and own-missile tracking, data up-link, and on-board missile measurement and track fusion is the natural choice for air-defence. An IMM is used to process radar measurements, combining the estimates from filters with different target dynamics. The remote missile state observer combines up-linked target tracks and missile plots with IMU and seeker data to provide optimal guidance information. The performance of traditional PN and CLOS missile guidance is the basis against which on-line trajectory optimisation is judged. Enhanced guidance laws are presented that demand more from the state observers, stressing the importance of time-to-go and transport delays in strap-down systems employing staring array technology. Algorithms for solving the guidance twopoint boundary value problems created from the missile state observer output using gradient projection in function space are presented. A simulation integrating these aspects was developed whose infrastructure, capable of supporting any dynamical model, is described in the air-defence context. MBDA have extended this work creating the Aircraft and Missile Integration Simulation (AMIS) for integrating different launchers and missiles. The maturity of the AMIS makes it a tool for developing pre-launch algorithms for modern air-launched missiles from modern military aircraft.EThOS - Electronic Theses Online ServiceGBUnited Kingdo