Store Vulnerability Window (SVW): Re-Execution Filtering for Enhanced Load/Store Optimization

A high-bandwidth, low-latency load-store unit is a critical component of a dynamically scheduled processor. Unfortunately, it is also one of the most complex and non-scalable components. Recently, several researchers have proposed techniques that simplify the core load-store unit and improve its scalability in exchange for the in-order pre-retirement re-execution of some subset of the loads in the program. We call such techniques load/store optimizations. One recent optimization attacks load queue (LQ) scalability by replacing the expensive associative search that is used to enforce intra- and inter- thread ordering with load re-execution. A second attacks store queue (SQ) scalability by speculatively filtering some load accesses and some store entries from it. The speculatively accessed, speculatively populated SQ can be made smaller and faster, but load re-execution is required to verify the speculation. A third uses a hardware table to identify redundant loads and skip their execution altogether. Redundant load elimination is highly accurate but not 100%, so re-execution is needed to flag false eliminations. Unfortunately, the inherent benefits of load/store optimizations are mitigated by re-execution itself. Re-execution contends for cache bandwidths with store retirement, and serializes load re-execution with subsequent store retirement. If a particular technique requires a sufficient number of load re-executions, the cost of these re-executions will outweigh the benefits of the technique entirely and may even produce drastic slowdowns. This is the case for the SQ technique. Store Vulnerability Window (SVW) is a new mechanism that reduces the re-execution requirements of a given load/store optimization significantly, by an average of 85% across the three load/store optimizations we study. This reduction relieves cache port contention and removes many of the dynamic serialization events that contribute the bulk of re-execution’s cost, and allows these techniques to perform up to their full potential. For the scalable SQ optimization, this means the chnace to perform at all. Without SVW, this technique posts significant slowdowns. SVW is a simple scheme based on monotonic store sequence numbering and a novel application of Bloom Filtering. The cost of an effective SVW implementation is a 1KB buffer and an 2B field per LQ entry

NoSQ: Store-Load Communication without a Store Queue

This paper presents NoSQ (short for No Store Queue), a microarchitecture that performs store-load communication without a store queue and without executing stores in the out-of-order engine. NoSQ implements store-load communication using speculative memory bypassing (SMB), the dynamic short-circuiting of DEF-store-load-USE chains to DEF-USE chains. Whereas previous proposals used SMB as an opportunistic complement to conventional store queue-based forwarding, NoSQ uses SMB as a store queue replacement. NoSQ relies on two supporting mechanisms. The first is an advanced store-load bypassing predictor that for a given dynamic load can predict whether that load will bypass and the identity of the communicating store. The second is an efficient verification mechanism for both bypassed and non-bypassed loads using in-order load re-execution with an SMB-aware store vulnerability window (SVW) filter. The primary benefit of NoSQ is a simple, fast datapath that does not contain store-load forwarding hardware; all loads get their values either from the data cache or from the register file. Experiments show that this simpler design - despite being more speculative - slightly outperforms a conventional store-queue based design on most benchmarks (by 2% on average)

Memory disambiguation hardware: a review

One of the main challenges of modern processor designs is the implementation of scalable and efficient mechanisms to detect memory access order violations as a result of out-of-order execution. Conventional structures performing this task are complex, inefficient and power-hungry. This fact has generated a large body of work on optimizing address-based memory disambiguation logic, namely the load-store queue. In this paper we review the most significant proposals in this research field, focusing on our own contributions.Facultad de Informátic

Memory disambiguation hardware: a review

One of the main challenges of modern processor designs is the implementation of scalable and efficient mechanisms to detect memory access order violations as a result of out-of-order execution. Conventional structures performing this task are complex, inefficient and power-hungry. This fact has generated a large body of work on optimizing address-based memory disambiguation logic, namely the load-store queue. In this paper we review the most significant proposals in this research field, focusing on our own contributions.Facultad de Informátic

Improving processor efficiency by exploiting common-case behaviors of memory instructions

Processor efficiency can be described with the help of a number of  desirable effects or metrics, for example, performance, power, area, design complexity and access latency. These metrics serve as valuable tools used in designing new processors and they also act as  effective standards for comparing current processors. Various factors impact the efficiency of modern out-of-order processors and one important factor is the manner in which instructions are processed through the processor pipeline. In this dissertation research, we study the impact of load and store instructions (collectively known as memory instructions) on processor efficiency,  and show how to improve efficiency by exploiting common-case or  predictable patterns in the behavior of memory instructions. The memory behavior patterns that we focus on in our research are the predictability of memory dependences, the predictability in data forwarding patterns,   predictability in instruction criticality and conservativeness in resource allocation and deallocation policies. We first design a scalable  and high-performance memory dependence predictor and then apply accurate memory dependence prediction to improve the efficiency of the fetch engine of a simultaneous multi-threaded processor. We then use predictable data forwarding patterns to eliminate power-hungry  hardware in the processor with no loss in performance.  We then move to  studying instruction criticality to improve  processor efficiency. We study the behavior of critical load instructions  and propose applications that can be optimized using  predictable, load-criticality  information. Finally, we explore conventional techniques for allocation and deallocation  of critical structures that process memory instructions and propose new techniques to optimize the same.  Our new designs have the potential to reduce  the power and the area required by processors significantly without losing  performance, which lead to efficient designs of processors.Ph.D.Committee Chair: Loh, Gabriel H.; Committee Member: Clark, Nathan; Committee Member: Jaleel, Aamer; Committee Member: Kim, Hyesoon; Committee Member: Lee, Hsien-Hsin S.; Committee Member: Prvulovic, Milo

Affordable kilo-instruction processors

Diversos motius expliquen l'estancament en el que es troba el desenvolupament del processador tradicional dissenyat per maximitzar el rendiment d'un únic fil d'execució. Per una banda, técniques agressives com la supersegmentacó del camí de dades o l'execució fora d'ordre tenen un impacte molt negatiu sobre el consum de potència i la complexitat del disseny. Altrament, l'increment en la freqüència del processador augmenta la discrepància entre la velocitat del processador i el temps d'accés a memòria principal. Tot i que les memòries cau redueixen considerablement el nombre d'accessos a memòria principal, aquests accessos introdueixen latencies prou grans per reduir considerablement el rendiment. Tècniques convencionals com l'execució fora d'ordre, útils per ocultar accessos a les memòries cau de 2on nivell, no estan pensades per ocultar latències tan grans. Caldrien cues amb mides de centenars d'instruccions i milers de registres per tal de no interrompre l'execució en el moment de produir-se un accés a memòria principal. Desafortunadament, la tecnologia disponible no és eficient per implementar aquestes estructures monolíticament, doncs resultaria un temps d'accés molt elevat, un consum de potència igualment elevat i un àrea no menyspreable. En aquesta tesi s'han estudiat tècniques que permeten l'implementació d'un processador amb capacitat per continuar processant instruccions en el cas de que es produeixin accessos a memòria principal. Les condicions per a que aquest processador sigui implementable són que estigui basat en estructures de mida convencional i que tingui una unitat de control senzilla. El repte es troba en conciliar un model de processador distribuït amb un control senzill. El problema del disseny del processador s'ha enfocat observant el comportament d'un processador de recursos infinits. S'ha observat que l'execució segueix uns patrons molt interessants, basats en la localitat d'execució. En aplicacions numèriques s'observa que més del 70% de les instruccions no depenen de accessos a memòria principal. Aixó és molt important doncs mostra que sempre hi ha una porció important d'instruccions executables poc després de la decodificació. Aixó permet proposar un nou tipus de processador amb dues unitats d'execució. La primera unitat (el "Cache Processor") processa a alta velocitat instruccions independents de memòria principal. La segona unitat ("Memory Processor") processa les instruccions dependents de accessos a memòria principal, pero de forma molt més relaxada, cosa que li permet mantenir milers de instruccions en vol. Aquesta proposta rep el nom de Decoupled KILO-Instruction Processor (D-KIP) i té forces avantatges: per un costat permet la construcció d'un kilo-instruction processor basat en estructures convencionals i per l'altre simplifica el disseny ja que minimitza les interaccions entre ambdos unitats d'execució.En aquesta tesi es proposen dos implementacions de processadors desacoblats: el D-KIP original, i el Flexible Heterogeneous MultiCore (FMC). Sobre aquestes propostes s'analitza el rendiment i es compara amb altres tècniques que incrementan el parallelisme de memoria, com el prefetching o l'execució "runahead". D'aquesta avaluació es desprén que el processador FMC té un rendiment similar al de un processador convencional amb una finestra de 1500 instruccions en vol. Posteriorment s'analitza l'integració del FMC en entorns multicore/multiprogrammats. La tesi es completa amb la proposta d'una cua de loads i stores (LSQ) per a aquest tipus de processador.Several motives explain the slowdown of high-performance single-thread processor development. On the one hand, aggressive techniques such as superpipelining or out-of-order execution have a considerable impact on power consumption and design complexity. On the other hand, the increment in processor frequencies has led to a large disparity between processor speed and memory access time. Although cache memories considerably reduce the number of accesses to main memory, the remaining accesses introduce latencies large enough to considerably decrease performance. Conventional techniques such as out-of-order execution, while effective in hiding L2 cache accesses, cannot hide latencies this large. Queues of hundreds of entries and thousands of registers would be necessary in order to prevent execution from stalling in the event of a L2 cache miss. Unfortunately, current technology cannot efficiently implement such structures monolithically, as access latencies would considerably increase, as would power consumption and area consumption.In this thesis we studied techniques that allow the processor to continue processing instructions in the event of main memory accesses. The conditions for such a processor to be implementable are that it should be based on structures of conventional size and that it should feature simple control logic. The challenge lies in being able to design a distributed processor with simple control. The design of this processor has been approached by analyzing the behavior of a processor with infinite resources. We have observed that execution follows a very interesting pattern based on execution locality. In numerical codes we observed that over 70% of all instructions do not depend on memory accesses. This is interesting since it shows that there is always a large portion of instructions that can be executed shortly after decode. This allows us to propose a new kind of processor with two execution units. The first unit, the Cache Processor, processes memory-independent instructions at high speed. The second unit, the Memory Processor, processes instructions that depend on main memory accesses, but using relaxed scheduling logic, which allows it to scale to thousands of in-flight instructions. This proposal, which receives the name of Decoupled KILO-Instruction Processor (D-KIP), has several advantages. On the one hand it allows the construction of a kilo-instruction processor based on conventional structures and, on the other hand, it simplifies the design as the interaction between both execution units is minimal. In this thesis two implementations for this kind of processor are presented: the original D-KIP and the Flexible Heterogeneous MultiCore (FMC). The performance of these proposals is analyzed and compared to other proposals that increase memory-level parallelism, such as prefetching or runahead execution. It is observed that the FMC processor performs at the same level of a conventional processor with a window of around 1500 instructions. Further, the integration of the FMC processor into a multicore/multiprogrammed environment is studied. This thesis concludes with the proposal of a two-level Load/Store Queue for this kind of processor

CELLO: Compiler-Assisted Efficient Load-Load Ordering in Data-Race-Free Regions

Efficient Total Store Order (TSO) implementations allow loads to execute speculatively out-of-order. To detect order violations, the load queue (LQ) holds all the in-flight loads and is searched on every invalidation and cache eviction. Moreover, in a simultaneous multithreading processor (SMT), stores also search the LQ when writing to cache. LQ searches entail considerable energy consumption. Furthermore, the processor stalls upon encountering the LQ full or when its ports are busy. Hence, the LQ is a critical structure in terms of both energy and performance. In this work, we observe that the use of the LQ could be dramatically optimized under the guarantees of the datarace-free (DRF) property imposed by modern programming languages. To leverage this observation, we propose CELLO, a software-hardware co-design in which the compiler detects memory operations in DRF regions and the hardware optimizes their execution by safely skipping LQ searches without violating the TSO consistency model. Furthermore, CELLO allows removing DRF loads from the LQ earlier, as they do not need to be searched to detect consistency violations. With minimal hardware overhead, we show that an 8-core 2- way SMT processor with CELLO avoids almost all conservative searches to the LQ and significantly reduces its occupancy. CELLO allows i) to reduce the LQ energy expenditure by 33% on average (up to 53%) while performing 2.8% better on average (up to 18.6%) than the baseline system, and ii) to shrink the LQ size from 192 to only 80 entries, reducing the LQ energy expenditure as much as 69% while performing on par with a mainstream LQ implementation

SAMIE-LSQ: set-associative multiple-instruction entry load/store queue

The load/store queue (LSQ) is one of the most complex parts of contemporary processors. Its latency is critical for the processor performance and it is usually one of the processor hotspots. This paper presents a highly banked, set-associative, multiple-instruction entry LSQ (SAMIE-LSQ,) that achieves high performance with small energy requirements. The SAMIE-LSQ classifies the memory instructions (loads and stores) based on the address to be accessed, and groups those instructions accessing the same cache line in the same entry. Our approach relies on the fact that many in-flight memory instructions access the same cache lines. Each SAMIE-LSQ entry has space for several memory instructions accessing the same cache line. This arrangement has a number of advantages. First, it significantly reduces the address comparison activity needed for memory disambiguation since there are less addresses to be compared. It also reduces the activity in the data TLB, the cache tag and cache data arrays. This is achieved by caching the cache line location and address translation in the corresponding SAMIE-LSQ entry once the access of one of the instructions in an entry is performed, so instructions that share an entry can reuse the translation, avoid the tag check and get the data directly from the concrete cache way without checking the others. Besides, the delay of the proposed scheme is lower than that required by a conventional LSQ. We show that the SAMIE-LSQ saves 82% dynamic energy for the load/store queue, 42% for the LI data cache and 73% for the data TLB, with a negligible impact on performance (0.6%)Peer ReviewedPostprint (published version

Scalable hardware memory disambiguation

This dissertation deals with one of the long-standing problems in Computer Architecture – the problem of memory disambiguation. Microprocessors typically reorder memory instructions during execution to improve concurrency. Such microprocessors use hardware memory structures for memory disambiguation, known as LoadStore Queues (LSQs), to ensure that memory instruction dependences are satisfied even when the memory instructions execute out-of-order. A typical LSQ implementation (circa 2006) holds all in-flight memory instructions in a physically centralized LSQ and performs a fully associative search on all buffered instructions to ensure that memory dependences are satisfied. These LSQ implementations do not scale because they use large, fully associative structures, which are known to be slow and power hungry. The increasing trend towards distributed microarchitectures further exacerbates these problems. As on-chip wire delays increase and high-performance processors become necessarily distributed, centralized structures such as the LSQ can limit scalability. This dissertation describes techniques to create scalable LSQs in both centralized and distributed microarchitectures. The problems and solutions described in this thesis are motivated and validated by real system designs. The dissertation starts with a description of the partitioned primary memory system of the TRIPS processor, of which the LSQ is an important component, and then through a series of optimizations describes how the power, area, and centralization problems of the LSQ can be solved with minor performance losses (if at all) even for large number of in flight memory instructions. The four solutions described in this dissertation — partitioning, filtering, late binding and efficient overflow management — enable power-, area-efficient, distributed and scalable LSQs, which in turn enable aggressive large-window processors capable of simultaneously executing thousands of instructions. To mitigate the power problem, we replaced the power-hungry, fully associative search with a power-efficient hash table lookup using a simple address-based Bloom filter. Bloom filters are probabilistic data structures used for testing set membership and can be used to quickly check if an instruction with the same data address is likely to be found in the LSQ without performing the associative search. Bloom filters typically eliminate more than 80% of the associative searches and they are highly effective because in most programs, it is uncommon for loads and stores to have the same data address and be in execution simultaneously. To rectify the area problem, we observe the fact that only a small fraction of all memory instructions are dependent, that only such dependent instructions need to be buffered in the LSQ, and that these instructions need to be in the LSQ only for certain parts of the pipelined execution. We propose two mechanisms to exploit these observations. The first mechanism, area filtering, is a hardware mechanism that couples Bloom filters and dependence predictors to dynamically identify and buffer only those instructions which are likely to be dependent. The second mechanism, late binding, reduces the occupancy and hence size of the LSQ. Both of these optimizations allows the number of LSQ slots to be reduced by up to one-half compared to a traditional organization without any performance degradation. Finally, we describe a new decentralized LSQ design for handling LSQ structural hazards in distributed microarchitectures. Decentralization of LSQs, and to a large extent distributed microarchitectures with memory speculation, has proved to be impractical because of the high performance penalties associated with the mechanisms for dealing with hazards. To solve this problem, we applied classic flow-control techniques from interconnection networks for handling resource con- flicts. The first method, memory-side buffering, buffers the overflowing instructions in a separate buffer near the LSQs. The second scheme, execution-side NACKing, sends the overflowing instruction back to the issue window from which it is later re-issued. The third scheme, network buffering, uses the buffers in the interconnection network between the execution units and memory to hold instructions when the LSQ is full, and uses virtual channel flow control to avoid deadlocks. The network buffering scheme is the most robust of all the overflow schemes and shows less than 1% performance degradation due to overflows for a subset of SPEC CPU 2000 and EEMBC benchmarks on a cycle-accurate simulator that closely models the TRIPS processor. The techniques proposed in this dissertation are independent, architectureneutral and their cumulative benefits result in LSQs that can be partitioned at a fine granularity and have low design complexity. Each of these partitions selectively buffers only memory instructions with true dependences and can be closely coupled with the execution units thus minimizing power, area, and latency. Such LSQ designs with near-ideal characteristics are well suited for microarchitectures with thousands of instructions in-flight and may enable even more aggressive microarchitectures in the future.Computer Science

Efficient Scaling of Out-of-Order Processor Resources

Rather than improving single-threaded performance, with the dawn of the multi-core era, processor microarchitects have exploited Moore's law transistor scaling by increasing core density on a chip and increasing the number of thread contexts within a core. However, single-thread performance and efficiency is still very relevant in the power-constrained multi-core era, as increasing core counts do not yield corresponding performance improvements under real thermal and thread-level constraints. This dissertation provides a detailed study of register reference count structures and its application to both conventional and non-conventional, latency tolerant, out-of-order processors. Prior work has incorporated reference counting, but without a detailed implementation or energy model. This dissertation presents a working implementation of reference count structures and shows the overheads are low and can be recouped by the techniques enabled in high-performance out-of-order processors. A study of register allocation algorithms exploits register file occupancy to reduce power consumption by dynamically resizing the register file, which is especially important in the face of wider multi-threaded processors who require larger register files. Latency tolerance has been introduced as a technique to improve single threaded performance by removing cache-miss dependent instructions from the execution pipeline until the miss returns. This dissertation introduces a microarchitecture with a predictive approach to identify long-latency loads, and reduce the energy cost and overhead of scaling the instruction window inherent in latency tolerant microarchitectures. The key features include a front-end predictive slice-out mechanism and in-order queue structure along with mechanisms to reduce the energy cost and register-file usage of executing instructions. Cycle-level simulation shows improved performance and reduced energy delay for memory-bound workloads. Both techniques scale processor resources, addressing register file inefficiency and the allocation of processor resources to instructions during low ILP regions.Ph.D., Computer Engineering -- Drexel University, 201