A composable, energy-managed, real-time MPSOC platform.

Multi-processors systems on chip (MPSOC) platforms emerged in embedded systems as hardware solutions to support the continuously increasing functionality and performance demands in this domain. Such a platform has to execute a mix of applications with diverse performance and timing constraints, i.e., real-time or non-real-time, thus different application schedulers should co-exist on an MPSOC. Moreover, applications share many MPSOC resources, thus their timing depends on the arbitration at these resources. Arbitration may create inter-application dependencies, e.g., the timing of a low priority application depends on the timing of all higher priority ones. Application inter-dependencies make the functional and timing verification and the integration process harder. This is especially problematic for real-time applications, for which fulfilling the time-related constraints should be guaranteed by construction. Moreover, energy and power management, commonly employed in embedded systems, make this verification even more difficult. Typically, energy and power management involves scaling the resources operating point, which has a direct impact on the resource performance, thus influences the application time behaviour. Finally, a small change in one application leads to the need to re-verify all other applications, incurring a large effort. Composability is a property meant to ease the verification and integration process. A system is composable if the functionality and the timing behaviour of each application is independent of other applications mapped on the same platform. Composability is achieved by utilising arbiters that ensure applications independence. In this paper we present the concepts behind a composable, scalable, energy-managed MPSOC platform, able to support different real-time and nonreal time schedulers concurrently, and discuss its advantages and limitations

An Interconnection Network Topology Generation Scheme for Multicore Systems

Multi-Processor System on Chip (MPSoC) consisting of multiple processing cores connected via a Network on Chip (NoC) has gained prominence over the last decade. Most common way of mapping applications to MPSoCs is by dividing the application into small tasks and representing them in the form of a task graph where the edges connecting the tasks represent the inter task communication. Task scheduling involves mapping task to processor cores so as to meet a specified deadline for the application/task graph. With increase in system complexity and application parallelism, task communication times are tending towards task execution times. Hence the NoC which forms the communication backbone for the cores plays a critical role in meeting the deadlines. In this thesis we present an approach to synthesize a minimal network connecting a set of cores in a MPSoC in the presence of deadlines. Given a task graph and a corresponding task to processor schedule, we have developed a partitioning methodology to generate an efficient interconnection network for the cores. We adopt a 2-phase design flow where we synthesize the network in first phase and in second phase we perform statistical analysis of the network thus generated. We compare our model with a simulated annealing based scheme, a static graph based greedy scheme and the standard mesh topology. The proposed solution offers significant area and performance benefits over the alternate solutions compared in this work

On Co-Optimization Of Constrained Satisfiability Problems For Hardware Software Applications

Manufacturing technology has permitted an exponential growth in transistor count and density. However, making efficient use of the available transistors in the design has become exceedingly difficult. Standard design flow involves synthesis, verification, placement and routing followed by final tape out of the design. Due to the presence of various undesirable effects like capacitive crosstalk, supply noise, high temperatures, etc., verification/validation of the design has become a challenging problem. Therefore, having a good design convergence may not be possible within the target time, due to a need for a large number of design iterations. Capacitive crosstalk is one of the major causes of design convergence problems in deep sub-micron era. With scaling, the number of crosstalk violations has been increasing because of reduced inter-wire distances. Consequently only the most severe crosstalk faults are fixed pre-silicon while the rest are tested post-silicon. Testing for capacitive crosstalk involves generation of input patterns which can be applied post-silicon to the integrated circuit and comparison of the output response. These patterns are generated at the gate/ Register Transfer Level (RTL) of abstraction using Automatic Test Pattern Generation (ATPG) tools. In this dissertation, anInteger Linear Programming (ILP) based ATPG technique for maximizing crosstalk induced delay increase at the victim net, for multiple aggressor crosstalk faults, is presented. Moreover, various solutions for pattern generation considering both zero as well as unit delay models is also proposed. With voltage scaling, power supply switching noise has become one of the leading causes of signal integrity related failures in deep sub-micron designs. Hence, during power supply network design and analysis of power supply switching noise, computation of peak supply current is an essential step. Traditional peak current estimation approaches involve addition of peak current associated with all the CMOS gates which are switching in a combinational circuit. Consequently, this approach does not take the Boolean and temporal relationships of the circuit into account. This work presents an ILP based technique for generation of an input pattern pair which maximizes switching supply currents for a combinational circuit in the presence of integer gate delays. The input pattern pair generated using the above approach can be applied post-silicon for power droop testing. With high level of integration, Multi-Processor Systems on Chip (MPSoC) feature multiple processor cores and accelerators on the same die, so as to exploit the instruction level parallelism in the application. For hardware-software co-design, application programming model is based on a Task Graph, which represents task dependencies and execution/transfer times for various threads and processes within an application. Mapping an application to an MPSoC traditionally involves representing it in the form of a task graph and employing static scheduling in order to minimize the schedule length. Dynamic system behavior is not taken into consideration during static scheduling, while dynamic scheduling requires the knowledge of task graph at runtime. A run-time task graph extraction heuristic to facilitate dynamic scheduling is also presented here. A novel game theory based approach uses this extracted task graph to perform run-time scheduling in order to minimize total schedule length. With increase in transistor density, power density has gone up substantially. This has lead to generation of regions with very high temperature called Hotspots. Hotspots lead to reliability and performance issues and affect design convergence. In current generation Integrated Circuits (ICs) temperature is controlled by reducing power dissipation using Dynamic Thermal Management (DTM) techniques like frequency and/or voltage scaling. These techniques are reactive in nature and have detrimental effects on performance. Here, a look-ahead based task migration technique is proposed, in order to utilize the multitude of cores available in an MPSoC to eliminate thermal emergencies. Our technique is based on temperature prediction, leveraging upon a novel wavelet based thermal modeling approach. Hence, this work addresses several optimization problems that can be reduced to constrained max-satisfiability, involving integer as well as Boolean constraints in hardware and software domains. Moreover, it provides domain specific heuristic solutions for each of them

Energy-efficient Static Task Scheduling on VFI based NoC-HMPSoCs for Intelligent Edge Devices in Cyber-Physical Systems

The interlinked processing units in the modern Cyber-Physical Systems (CPS) creates a large network of connected computing embedded systems. Network-on-Chip (NoC) based multiprocessor system-on-chip (MPSoC) architecture is becoming a de-facto computing platform for real-time applications due to its higher performance and Quality-of-Service (QoS). The number of processors has increased significantly on the multiprocessor systems in CPS therefore, Voltage Frequency Island (VFI) recently adopted for effective energy management mechanism in the large scale multiprocessor chip designs. In this paper, we investigate energy and contention-aware static scheduling for tasks with precedence and deadline constraints on intelligent edge devices deploying heterogeneous VFI based NoC-MPSoCs with DVFS-enabled processors. Unlike the existing population-based optimization algorithms, we propose a novel population-based algorithm called ARSH-FATI that can dynamically switch between explorative and exploitative search modes at run-time. Our static scheduler ARHS-FATI collectively performs task mapping, scheduling, and voltage scaling. Consequently, its performance is superior to the existing state-of-the-art approach proposed for homogeneous VFI based NoC-MPSoCs. We also developed a communication contention-aware Earliest Edge Consistent Deadline First (EECDF) scheduling algorithm and gradient descent inspired voltage scaling algorithm called Energy Gradient Decent (EGD). We have introduced a notion of Energy Gradient (EG) that guides EGD in its search for islands voltage settings and minimize the total energy consumption. We conducted the experiments on 8 real benchmarks adopted from Embedded Systems Synthesis Benchmarks (E3S). Our static scheduling approach ARSH-FATI outperformed state-of-the-art technique and achieved an average energy-efficiency of ~ 24% and ~ 30% over CA-TMES-Search and CA-TMES-Quick respectively

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Design Space Exploration for MPSoC Architectures

Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.Siirretty Doriast

Energy Aware Runtime Systems for Elastic Stream Processing Platforms

Following an invariant growth in the required computational performance of processors, the multicore revolution started around 20 years ago. This revolution was mainly an answer to power dissipation constraints restricting the increase of clock frequency in single-core processors. The multicore revolution not only brought in the challenge of parallel programming, i.e. being able to develop software exploiting the entire capabilities of manycore architectures, but also the challenge of programming heterogeneous platforms. The question of “on which processing element to map a specific computational unit?”, is well known in the embedded community. With the introduction of general-purpose graphics processing units (GPGPUs), digital signal processors (DSPs) along with many-core processors on different system-on-chip platforms, heterogeneous parallel platforms are nowadays widespread over several domains, from consumer devices to media processing platforms for telecom operators. Finding mapping together with a suitable hardware architecture is a process called design-space exploration. This process is very challenging in heterogeneous many-core architectures, which promise to offer benefits in terms of energy efficiency. The main problem is the exponential explosion of space exploration. With the recent trend of increasing levels of heterogeneity in the chip, selecting the parameters to take into account when mapping software to hardware is still an open research topic in the embedded area. For example, the current Linux scheduler has poor performance when mapping tasks to computing elements available in hardware. The only metric considered is CPU workload, which as was shown in recent work does not match true performance demands from the applications. Doing so may produce an incorrect allocation of resources, resulting in a waste of energy. The origin of this research work comes from the observation that these approaches do not provide full support for the dynamic behavior of stream processing applications, especially if these behaviors are established only at runtime. This research will contribute to the general goal of developing energy-efficient solutions to design streaming applications on heterogeneous and parallel hardware platforms. Streaming applications are nowadays widely spread in the software domain. Their distinctive characiteristic is the retrieving of multiple streams of data and the need to process them in real time. The proposed work will develop new approaches to address the challenging problem of efficient runtime coordination of dynamic applications, focusing on energy and performance management.Efter en oföränderlig tillväxt i prestandakrav hos processorer, började den flerkärniga processor-revolutionen för ungefär 20 år sedan. Denna revolution skedde till största del som en lösning till begränsningar i energieffekten allt eftersom klockfrekvensen kontinuerligt höjdes i en-kärniga processorer. Den flerkärniga processor-revolutionen medförde inte enbart utmaningen gällande parallellprogrammering, m.a.o. förmågan att utveckla mjukvara som använder sig av alla delelement i de flerkärniga processorerna, men också utmaningen med programmering av heterogena plattformar. Frågeställningen ”på vilken processorelement skall en viss beräkning utföras?” är väl känt inom ramen för inbyggda datorsystem. Efter introduktionen av grafikprocessorer för allmänna beräkningar (GPGPU), signalprocesserings-processorer (DSP) samt flerkärniga processorer på olika system-on-chip plattformar, är heterogena parallella plattformar idag omfattande inom många domäner, från konsumtionsartiklar till mediaprocesseringsplattformar för telekommunikationsoperatörer. Processen att placera beräkningarna på en passande hårdvaruplattform kallas för utforskning av en designrymd (design-space exploration). Denna process är mycket utmanande för heterogena flerkärniga arkitekturer, och kan medföra fördelar när det gäller energieffektivitet. Det största problemet är att de olika valmöjligheterna i designrymden kan växa exponentiellt. Enligt den nuvarande trenden som förespår ökad heterogeniska aspekter i processorerna är utmaningen att hitta den mest passande placeringen av beräkningarna på hårdvaran ännu en forskningsfråga inom ramen för inbyggda datorsystem. Till exempel, den nuvarande schemaläggaren i Linux operativsystemet är inkapabel att hitta en effektiv placering av beräkningarna på den underliggande hårdvaran. Det enda mätsättet som används är processorns belastning vilket, som visats i tidigare forskning, inte motsvarar den verkliga prestandan i applikationen. Användning av detta mätsätt vid resursallokering resulterar i slöseri med energi. Denna forskning härstammar från observationerna att dessa tillvägagångssätt inte stöder det dynamiska beteendet hos ström-processeringsapplikationer (stream processing applications), speciellt om beteendena bara etableras vid körtid. Denna forskning kontribuerar till det allmänna målet att utveckla energieffektiva lösningar för ström-applikationer (streaming applications) på heterogena flerkärniga hårdvaruplattformar. Ström-applikationer är numera mycket vanliga i mjukvarudomän. Deras distinkta karaktär är inläsning av flertalet dataströmmar, och behov av att processera dem i realtid. Arbetet i denna forskning understöder utvecklingen av nya sätt för att lösa det utmanade problemet att effektivt koordinera dynamiska applikationer i realtid och fokus på energi- och prestandahantering

A composable, energy-managed, real-time MPSOC platform

Multi-processors systems on chip (MPSOC) platforms emerged in embedded systems as hardware solutions to support the continuously increasing functionality and performance demands in this domain. Such a platform has to execute a mix of applications with diverse performance and timing constraints, i.e., real-time or non-real-time, thus different application schedulers should co-exist on an MPSOC. Moreover, applications share many MPSOC resources, thus their timing depends on the arbitration at these resources. Arbitration may create inter-application dependencies, e.g., the timing of a low priority application depends on the timing of all higher priority ones. Application inter-dependencies make the functional and timing verification and the integration process harder. This is especially problematic for real-time applications, for which fulfilling the time-related constraints should be guaranteed by construction. Moreover, energy and power management, commonly employed in embedded systems, make this verification even more difficult. Typically, energy and power management involves scaling the resources operating point, which has a direct impact on the resource performance, thus influences the application time behaviour. Finally, a small change in one application leads to the need to re-verify all other applications, incurring a large effort. Composability is a property meant to ease the verification and integration process. A system is composable if the functionality and the timing behaviour of each application is independent of other applications mapped on the same platform. Composability is achieved by utilising arbiters that ensure applications independence. In this paper we present the concepts behind a composable, scalable, energy-managed MPSOC platform, able to support different real-time and nonreal time schedulers concurrently, and discuss its advantages and limitations

Fuse-N: Framework for unified simulation environment for network-on-chip

Steady advancements in semiconductor technology over the past few decades have marked incipience of Multi-Processor System-on-Chip (MPSoCs). Owing to the inability of traditional bus-based communication system to scale well with improving microchip technologies, researchers have proposed Network-on-Chip (NoC) as the on-chip communication model. Current uni-processor centric modeling methodology does not address the new design challenges introduced by MPSoCs, thus calling for efficient simulation frameworks capable of capturing the interplay between the application, the architecture, and the network. Addressing these new challenges requires a framework that assists the designer at different abstraction levels of system design; This thesis concentrates on developing a framework for unified simulation environment for NoCs (fuse-N) which simplifies the design space exploration for NoCs by offering a comprehensive simulation support. The framework synthesizes the network infrastructure and the communication model and optimizes application mapping for design constraints. The proposed framework is a hardware-software co-design implementation using SystemC 2.1 and C++. Simulation results show the architectural, network and resource allocation behavior and highlight the quantitative relationships between various design choices; Also, a novel off-line non-preemptive static Traffic Aware Scheduling (TAS) policy is proposed for hard NoC platforms. The proposed scheduling policy maps the application onto the NoC architecture keeping track of the network traffic, which is generated with every resource and communication path allocation. TAS has been evaluated for various design metrics such as application completion time, resource utilization and task throughput. Simulation results show significant improvements over traditional approaches

Temperature-Aware Design and Management for 3D Multi-Core Architectures

Vertically-integrated 3D multiprocessors systems-on-chip (3D MPSoCs) provide the means to continue integrating more functionality within a unit area while enhancing manufacturing yields and runtime performance. However, 3D MPSoCs incur amplified thermal challenges that undermine the corresponding reliability. To address these issues, several advanced cooling technologies, alongside temperature-aware design-time optimizations and run-time management schemes have been proposed. In this monograph, we provide an overall survey on the recent advances in temperature-aware 3D MPSoC considerations. We explore the recent advanced cooling strategies, thermal modeling frameworks, design-time optimizations and run-time thermal management schemes that are primarily targeted for 3D MPSoCs. Our aim of proposing this survey is to provide a global perspective, highlighting the advancements and drawbacks on the recent state-of-the-ar