STUDY OF FULLY-INTEGRATED LOW-DROPOUT REGULATORS

Department of Electrical EngineeringThis thesis focuses on the introduction of fully-integrated low-dropout regulators (LDOs). Recently, for the mobile and internet-of-things applications, the level of integration is getting higher. LDOs get popular in integrated circuit design including functions such as reducing switching ripples from high-efficiency regulators, cancelling spurs from other loads, and giving different supply voltages to loads. In accordance with load applications, choosing proper LDOs is important. LDOs can be classified by the types of power MOSEFT, the topologies of error amplifier, and the locations of dominant pole. Analog loads such as voltage-controlled oscillators and analog-to-digital converters need LDOs that have high power-supply-rejection-ratio (PSRR), high accuracy, and low noise. Digital loads such as DRAM and CPU need fast transient response, a wide range of load current providable LDOs. As an example, we present the design procedure of a fully-integrated LDO that obtains the desired PSRR. In analog LDOs, we discuss advanced techniques such as local positive feedback loop and zero path that can improve stability and PSRR performance. In digital LDOs, the techniques to improve transient response are introduced. In analog-digital hybrid LDOs, to achieve both fast transient and high PSRR performance in a fully-integrated chip, how to optimally combine analog and digital LDOs is considered based on the characteristics of each LDO type. The future work is extracted from the considerations and limitations of conventional techniques.clos

Synthesizable delay line architectures for digitally controlled voltage regulators

Voltage regulators used in the integrated circuit (IC) industry require precise voltage regulation. In digitally controlled switching converters, this precise voltage regulation is achieved by high resolution digital pulse width modulators (DPWM). Digital delay lines can be used to generate the pulse width modulation (PWM) signal. Conventional delay lines are designed in a full custom design methodology which is extremely slow and expensive compared to register-transfer level (RTL) based designs; also RTL based designs are technology independent so the same design can be used with new technologies. The purpose of this work is to introduce a new architecture for the fully synthesizable digital delay line used in digitally controlled voltage regulators. A comparison between the proposed scheme and the conventional delay line is done post synthesis on the key delay line specifications like linearity, area, complexity, and compensation for process, voltage, and temperature (PVT) variations for multiple clock frequencies. Both schemes are designed using a hardware description language (HDL) and synthesized using Intel 32nm technology. The comparison showed that the proposed architecture has better linearity, area, and also it has a fast calibration time with respect to conventional delay lines. The delay lines are designed in parameterized way in order to make the design suitable for multiple frequencies

Addressing On-Chip Power Conversion and Dissipation Issues in Many-Core System-on-a-Chip based on Conventional Silicon and Emerging Nanotechnologies

Title from PDF of title page viewed August 27, 2018Dissertation advisor: Masud H ChowdhuryVitaIncludes bibliographical references (pages 158-163)Thesis (Ph.D.)--School of Computing and Engineering and Department of Physics and Astronomy. University of Missouri--Kansas City, 2017Integrated circuits (ICs) are moving towards system-on-a-chip (SOC) designs. SOC allows various small and large electronic systems to be implemented in a single chip. This approach enables the miniaturization of design blocks that leads to high density transistor integration, faster response time, and lower fabrication costs. To reap the benefits of SOC and uphold the miniaturization of transistors, innovative power delivery and power dissipation management schemes are paramount. This dissertation focuses on on-chip integration of power delivery systems and managing power dissipation to increase the lifetime of energy storage elements. We explore this problem from two different angels: On-chip voltage regulators and power gating techniques. On-chip voltage regulators reduce parasitic effects, and allow faster and efficient power delivery for microprocessors. Power gating techniques, on the other hand, reduce the power loss incurred by circuit blocks during standby mode. Power dissipation (Ptotal = Pstatic and Pdynamic) in a complementary metal-oxide semiconductor (CMOS) circuit comes from two sources: static and dynamic. A quadratic dependency on the dynamic switching power and a more than linear dependency on static power as a form of gate leakage (subthreshold current) exist. To reduce dynamic power loss, the supply power should be reduced. A significant reduction in power dissipation occurs when portions of a microprocessor operate at a lower voltage level. This reduction in supply voltage is achieved via voltage regulators or converters. Voltage regulators are used to provide a stable power supply to the microprocessor. The conventional off-chip switching voltage regulator contains a passive floating inductor, which is difficult to be implemented inside the chip due to excessive power dissipation and parasitic effects. Additionally, the inductor takes a very large chip area while hampering the scaling process. These limitations make passive inductor based on-chip regulator design very unattractive for SOC integration and multi-/many-core environments. To circumvent the challenges, three alternative techniques based on active circuit elements to replace the passive LC filter of the buck convertor are developed. The first inductorless on-chip switching voltage regulator architecture is based on a cascaded 2nd order multiple feedback (MFB) low-pass filter (LPF). This design has the ability to modulate to multiple voltage settings via pulse with modulation (PWM). The second approach is a supplementary design utilizing a hybrid low drop-out scheme to lower the output ripple of the switching regulator over a wider frequency range. The third design approach allows the integration of an entire power management system within a single chipset by combining a highly efficient switching regulator with an intermittently efficient linear regulator (area efficient), for robust and highly efficient on-chip regulation. The static power (Pstatic) or subthreshold leakage power (Pleak) increases with technology scaling. To mitigate static power dissipation, power gating techniques are implemented. Power gating is one of the popular methods to manage leakage power during standby periods in low-power high-speed IC design. It works by using transistor based switches to shut down part of the circuit block and put them in the idle mode. The efficiency of a power gating scheme involves minimum Ioff and high Ion for the sleep transistor. A conventional sleep transistor circuit design requires an additional header, footer, or both switches to turn off the logic block. This additional transistor causes signal delay and increases the chip area. We propose two innovative designs for next generation sleep transistor designs. For an above threshold operation, we present a sleep transistor design based on fully depleted silicon-on-insulator (FDSOI) device. For a subthreshold circuit operation, we implement a sleep transistor utilizing the newly developed silicon-on ferroelectric-insulator field effect transistor (SOFFET). In both of the designs, the ability to control the threshold voltage via bias voltage at the back gate makes both devices more flexible for sleep transistors design than a bulk MOSFET. The proposed approaches simplify the design complexity, reduce the chip area, eliminate the voltage drop by sleep transistor, and improve power dissipation. In addition, the design provides a dynamically controlled Vt for times when the circuit needs to be in a sleep or switching mode.Introduction -- Background and literature review -- Fully integrated on-chip switching voltage regulator -- Hybrid LDO voltage regulator based on cascaded second order multiple feedback loop -- Single and dual output two-stage on-chip power management system -- Sleep transistor design using double-gate FDSOI -- Subthreshold region sleep transistor design -- Conclusio

Full On-chip low dropout voltage regulator with an enhanced transient response for low power systems

A full on chip low Dropout Voltage Regulator (LDO) with fast transient response and small capacitor compensation circuit is proposed. The novel technique is implemented to detect the variation voltage at the output of LDO and enable the proposed fast detector amplifier (FDA) to improve load transient response of 50mA load step. The large external capacitor used in Conventional LDO Regulators is removed allowing for greater power system integration for system-on-chip (SoC) applications. The 1.6-V Full On-Chip LDO voltage regulator with a power supply of 1.8 V was designed and simulated in the 0.18µm CMOS technology, consuming only 14 µA of ground current with a fast settling-time LNR(Line Regulation) and LOR(Load regulation) of 928ns and 883ns respectively while the rise and fall times in LNR and LOR is 500ns

Scalable Analysis, Verification and Design of IC Power Delivery

Due to recent aggressive process scaling into the nanometer regime, power delivery network design faces many challenges that set more stringent and specific requirements to the EDA tools. For example, from the perspective of analysis, simulation efficiency for large grids must be improved and the entire network with off-chip models and nonlinear devices should be able to be analyzed. Gated power delivery networks have multiple on/off operating conditions that need to be fully verified against the design requirements. Good power delivery network designs not only have to save the wiring resources for signal routing, but also need to have the optimal parameters assigned to various system components such as decaps, voltage regulators and converters. This dissertation presents new methodologies to address these challenging problems. At first, a novel parallel partitioning-based approach which provides a flexible network partitioning scheme using locality is proposed for power grid static analysis. In addition, a fast CPU-GPU combined analysis engine that adopts a boundary-relaxation method to encompass several simulation strategies is developed to simulate power delivery networks with off-chip models and active circuits. These two proposed analysis approaches can achieve scalable simulation runtime. Then, for gated power delivery networks, the challenge brought by the large verification space is addressed by developing a strategy that efficiently identifies a number of candidates for the worst-case operating condition. The computation complexity is reduced from O(2^N) to O(N). At last, motivated by a proposed two-level hierarchical optimization, this dissertation presents a novel locality-driven partitioning scheme to facilitate divide-and-conquer-based scalable wire sizing for large power delivery networks. Simultaneous sizing of multiple partitions is allowed which leads to substantial runtime improvement. Moreover, the electric interactions between active regulators/converters and passive networks and their influences on key system design specifications are analyzed comprehensively. With the derived design insights, the system-level co-design of a complete power delivery network is facilitated by an automatic optimization flow. Results show significant performance enhancement brought by the co-design

High power-supply rejection current-mode low-dropout linear regulator

Power management components can be found in a host of different applications ranging from portable hand held gadgets to modern avionics to advanced medical instrumentations, among many other applications. Low-dropout (LDO) linear regulators are particularly popular owing to their: ease of use, low cost, high accuracy, low noise, and high bandwidth. With all its glory, however, it tends to underperform switched-mode power supplies (SMPS) when with comes to power conversion efficiency, although the later generates a lot of ripple at its output. With the growing need to improve system efficiency (hence longer battery life) without degrading system performance, many high end (noise sensitive) applications such as data converters, RF transceivers, precision signal conditioning, among others, use high efficiency SMPS with LDO regulators as post-regulators for rejecting the ripple generated by SMPS. This attribute of LDO regulators is known as power supply rejection (PSR). With the trend towards increasing switching frequency for SMPS, to minimize PC board real estate, it is becoming ever more difficult for LDO regulators to suppress the associate high frequency ripple since at such high frequencies, different parasitic components of the LDO regulator start to deteriorate its PSR performance. There have been a handful of different techniques suggested in the literature that can be used to achieve good PSR performance at higher frequencies. However, each of these techniques suffers from a number of drawbacks ranging from reduced efficiency to increased cost to increased solution size, and with the growing demand for higher efficiency and smaller power supplies, these techniques have their clear limitations. The objective of this research project is to develop a novel current-mode LDO regulator that can achieve good high frequency PSR performance without suffering from the afore mentioned drawbacks. The proposed architecture was fabricated using a proprietary 1.5 um Bipolar process technology, and the measurement results show a PSR improvement of 20dB (at high frequencies) over conventional regulators. Moreover, the proposed LDO regulator requires a small 15nF output capacitor for stability, which is far smaller than some of the currently used techniques.M.S.Committee Chair: Rincón-Mora, Gabriel; Committee Member: Ghovanloo, Maysam; Committee Member: Leach, W. Marshal

Modeling, Design and Optimization of IC Power Delivery with On-Chip Regulation

As IC technology continues to follow the Moore’s Law, IC designers have been constantly challenged with power delivery issues. While useful power must be reliably delivered to the on-die functional circuits to fulfill the desired functionality and performance, additional power overheads arise due to the loss associated with voltage conversion and parasitic resistance in the metal wires. Hence, one of the key IC power delivery design challenges is to develop voltage conversion/regulation circuits and the corresponding design strategies to provide a guaranteed level of power integrity while achieving high power efficiency and low area overhead. On-chip voltage regulation, a significant ongoing design trend, offers appealing active supply noise suppression close to the loads and is well positioned to address many power delivery challenges. However, to realize the full potential of on-chip voltage regulation requires systemic optimization of and tradeoffs among settling time, steady-state error, power supply noise, power efficiency, stability and area overhead, which are the key focuses of this dissertation. First, we develop new low-dropout voltage regulators (LDOs) that are well optimized for low power applications. To this end, dropout voltage, bias current and speed are important competing design objectives. This dissertation presents new flipped voltage follower (FVF) based topologies of on-chip voltage regulators that handle ultra-fast load transients in nanoseconds while achieving significant improvement on bias current consumption. An active frequency compensation is embedded to achieve high area efficiency by employing a smaller amount of compensation capacitors, the major silicon area contributor. Furthermore, in one of the proposed topologies an auxiliary digital feedback loop is employed in order to lower quiescent power consumption further. Second, coping with supply noise is becoming increasingly more difficult as design complexity grows, which leads to increased spatial and temporal load heterogeneity, and hence larger voltage variations in a given power domain. Addressing this challenge through a distributed methodology wherein multiple voltage regulators are placed across the same voltage domain is particularly promising. This distributive nature allows for even faster suppression of multiple hot spots by the nearby regulators within the power domain and can significantly boost power integrity. Nevertheless, reasoning about the stability of such distributively regulated power networks becomes rather complicated as a result of complex interactions between multiple active regulators and the large passive subnetwork. Coping with this stability challenge requires new theory and stability-ensuring design practice, as targeted by this dissertation. For the first time, we adopt and develop a hybrid stability framework for large power delivery networks with distributed voltage regulation. This framework is local in the sense that both the checking and assurance of network stability can be dealt with on the basis of each individual voltage regulator, leading to feasible design of large power delivery networks that would be computationally impossible otherwise. Accordingly, we propose a new hybrid stability margin concept, examine its tradeoffs with power efficiency, supply noise and silicon area, and demonstrate the resulted key design implications pertaining to new stability-ensuring LDO circuit design techniques and circuit topologies. Finally, we develop an automated hybrid stability design flow that is computationally efficient and provides a practical guarantee of network stability

Distributed IC Power Delivery: Stability-Constrained Design Optimization and Workload-Aware Power Management

ABSTRACT Power delivery presents key design challenges in today’s systems ranging from high performance micro-processors to mobile systems-on-a-chips (SoCs). A robust power delivery system is essential to ensure reliable operation of on-die devices. Nowadays it has become an important design trend to place multiple voltage regulators on-chip in a distributive manner to cope with power supply noise. However, stability concern arises because of the complex interactions be-tween multiple voltage regulators and bulky network of the surrounding passive parasitics. The recently developed hybrid stability theorem (HST) is promising to deal with the stability of such system by efficiently capturing the effects of all interactions, however, large overdesign and hence severe performance degradation are caused by the intrinsic conservativeness of the underlying HST framework. To address such challenge, this dissertation first extends the HST by proposing a frequency-dependent system partitioning technique to substantially reduce the pessimism in stability evaluation. By systematically exploring the theoretical foundation of the HST framework, we recognize all the critical constraints under which the partitioning technique can be performed rigorously to remove conservativeness while maintaining key theoretical properties of the partitioned subsystems. Based on that, we develop an efficient stability-ensuring automatic design flow for large power delivery systems with distributed on-chip regulation. In use of the proposed approach, we further discover new design insights for circuit designers such as how regulator topology, on-chip decoupling capacitance, and the number of integrated voltage regulators can be optimized for improved system tradeoffs between stability and performances. Besides stability, power efficiency must be improved in every possible way while maintaining high power quality. It can be argued that the ultimate power integrity and efficiency may be best achieved via a heterogeneous chain of voltage processing starting from on-board switching voltage regulators (VRs), to on-chip switching VRs, and finally to networks of distributed on-chip linear VRs. As such, we propose a heterogeneous voltage regulation (HVR) architecture encompassing regulators with complimentary characteristics in response time, size, and efficiency. By exploring the rich heterogeneity and tunability in HVR, we develop systematic workload-aware control policies to adapt heterogeneous VRs with respect to workload change at multiple temporal scales to significantly improve system power efficiency while providing a guarantee for power integrity. The proposed techniques are further supported by hardware-accelerated machine learning prediction of non-uniform spatial workload distributions for more accurate HVR adaptation at fine time granularity. Our evaluations based on the PARSEC benchmark suite show that the proposed adaptive 3-stage HVR reduces the total system energy dissipation by up to 23.9% and 15.7% on average compared with the conventional static two-stage voltage regulation using off- and on-chip switching VRs. Compared with the 3-stage static HVR, our runtime control reduces system energy by up to 17.9% and 12.2% on average. Furthermore, the proposed machine learning prediction offers up to 4.1% reduction of system energy

메모리 어플리케이션을 위한 빠른 과도 응답 성능을 가지는 디지털 낮은 드롭아웃 레귤레이터 설계

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2023. 2. 정덕균.In this dissertation, the design of a fast transient response digital low-dropout regulator (DLDO) applicable to next-generation memory systems is discussed. Recent technologies in memory systems mainly aim at high power density and fast data rate. Accordingly, the need for a power converter withstanding a large amount of load current change in a short period is increased. Accordingly, a solution for compensating for a voltage drop that causes significant damage to a memory data input/output is searched according to a periodic clock signal. With this situation, two structures that achieve fast transient response performance under the constraints of memory systems are proposed. To mitigate the transient response degradation under slow external clock conditions, an adaptive two-step search algorithm with event-driven approaches DLDO is proposed. The technique solves the limitations of loop operation time dependent on slow external clocks through a ring-amplifier-based continuous-time comparator. Also, shift register is designed as a circular structure with centralized control of each register to reduce the cost. Finally, the remaining regulation error is controlled by an adaptive successive approximation algorithm to minimize the settling time. Fast recovery and settling time are shown through the measurement of the prototype chip implemented by the 40-nm CMOS process. Next, a digital low dropout regulator for ultra-fast transient response is designed. A slope-detector-based coarse controller to detect, compensate, and correct load current changes occurring at every rising or falling edge of tens to hundreds of megahertz clocks is proposed. Compensation efficiency is increased by the method according to the degree of change in load voltage over time. Furthermore, the LUT-based shift register enables the fast loop response speed of the DLDO. Finally, a bidirectional latch-based driver with fast settling speed and high resolution are proposed. The prototype chip is implemented with a 40-nm CMOS process and achieves effective load voltage recovery through fast transient response performance even with low load capacitance.본 논문은 차세대 메모리 시스템에 적용 가능한 빠른 과도 응답 성능을 가지는 디지탈 낮은 드롭아웃 레귤레이터의 설계에 대해 기술한다. 메모리 시스템의 최근 기술들은 높은 전력 밀도와 빠른 데이터 속도를 주된 목표로 하며 이에 맞추어 단기간, 많은 양의 부하 전류 변화를 견디는 파워 컨버터의 필요성이 높아지고 있다. 이에 주기적인 클락 신호에 따라 메모리 데이터 입출력에 유의미한 손상을 발생시키는 전압 강하를 보상하는 해결 방안을 탐색한다. 이를 통해 메모리 시스템이 가지는 제약조건 하에서 빠른 과도 응답 성능을 달성하는 두 가지 구조를 제안한다. 첫 번째 시연으로서, 느린 외부 클락 조건에서 유발되는 디지탈 낮은 드롭아웃 레귤레이터의 과도 응답 성능 저하를 완화시키기 위한 이벤트 주도 방식의 적응형 두 단계 서치 기술을 제안한다. 본 기술은 느린 외부클락에 의존한 루프 동작 시간의 한계를 고리 증폭기 기반 연속 시간 비교기를 통해 해결한다. 또한 자리 이동 레지스터의 구현에 소모되는 비용을 줄이고자 각 레지스터의 제어 장치를 중앙으로 집적시킨 순환형 구조로 설계되었다. 마지막으로 남아있는 조정 에러는 적응방식의 축차 비교형 알고리즘으로 제어하여 교정에 필요한 시간을 최소화하였다. 40-nm CMOS 공정으로 구현된 프로토타입 칩의 측정을 통해 부하 전압의 빠른 회복 속도와 정정시간을 보임을 확인하였다. 두 번째 시연으로서, 초고속 과도 응답 환경에 적합한 디지털 낮은 드롭아웃 레귤레이터가 설계되었다. 수십~수백 메가헤르쯔 클락의 상승 또는 하강 엣지마다 발생하는 부하 전류 변화를 탐지하고 보상하고 정정하기 위해 기울기 탐지기 기반 coarse 제어기 기술을 제안한다. 시간에 따른 부하 전압 변화의 정도에 따라 차등 보상하는 알고리즘을 적용함으로써 보상 효율을 높였다. 나아가 순람표 기반 자리이동 레지스터는 부하 전류 과도 상태 이후 디지탈 레귤레이터의 빠른 루프 응답 속도를 가능케 하였다. 마지막으로 남은 조정 에러를 제어하는데 있어서 기존 자리이동 레지스터 방식에서 벗어나 빠른 수렴 속도와 높은 해상도를 가지는 양방향 래치 기반 드라이버가 제안되었다. 해당 프로토타입 칩은 40-nm CMOS 공정으로 구현되었으며, 낮은 부하 축전용량에도 빠른 과도 응답 성능을 통해 효과적인 부하 전압 회복을 이루어 내었다.CHAPTER 1 INTRODUCTION 1 1.1 MOTIVATION 1 1.2 VARIOUS TYPES OF LDO 4 1.2.1 ANALOG LDO VS. DIGITAL LDO 4 1.2.2 CAP LDO VS. CAP-LESS LDO 6 1.3 THESIS ORGANIZATION 8 CHAPTER 2 BACKGROUNDS ON DIGITAL LOW-DROPOUT REGULATOR 9 2.1 BASIC DIGITAL LOW-DROPOUT REGULATOR 9 2.2 FAST TRANSIENT RESPONSE LOW-DROPOUT REGULATOR 12 2.2.1 RESPONSE TIME 13 2.2.1 SETTLING TIME 20 2.3 VARIOUS METHODS FOR IMPLEMENT FAST TRANSIENT DIGITAL LDO 21 2.3.1 EVENT-DRIVEN DIGITAL LDO 21 2.3.2 FEEDFORWARD CONTROL 23 2.3.3 COMPUTATIONAL DIGITAL LDO 25 2.4 DESIGN POINTS OF FAST TRANSIENT RESPONSE DIGITAL LDO 27 CHAPTER 3 A FAST DROOP-RECOVERY EVENT-DRIVEN DIGITAL LDO WITH ADAPTIVE LINEAR/BINARY TWO-STEP SEARCH FOR VOLTAGE REGULATION IN ADVANCED MEMORY 29 3.1 OVERVIEW 29 3.2 PROPOSED DIGITAL LDO 32 3.2.1 MOTIVATION 32 3.2.2 ALSC WITH TWO-DIMENSIONAL CIRCULAR SHIFTING REGISTER 36 3.2.3 SBSC WITH SUBRANGE SUCCESSIVE-APPROXIMATION REGISTER 39 3.2.4 STABILITY ANALYSIS 41 3.3 CIRCUIT IMPLEMENTATION 44 3.3.1 TIME-INTERLEAVED RING-AMPLIFIER-BASED COMPARATOR 44 3.3.2 ASYNCHRONOUS 2D CIRCULAR SHIFTING REGISTER 49 3.3.3 SUBRANGE SUCCESSIVE APPROXIMATION REGISTER 51 3.4 MESUREMENT RESULTS 54 CHAPTER 4 A FAST TRANSIENT RESPONSE DIGITAL LOW-DROPOUT REGULATOR WITH SLOPE-DETECTOR-BASED MULTI-STEP CONTROL FOR DIGITAL LOAD APPLICATION 62 4.1 OVERVIEW 62 4.2 PROPOSED DIGITAL LDO 64 4.2.1 MOTIVATION 64 4.2.2 ARCHITECTURE OF DIGITAL LDO 66 4.2.3 SLEW-RATE DEPENDENT COARSE-CONTROL LOOP 69 4.2.4 FINE-CONTROL LOOP 72 4.2.5 CONTROL FOR LOAD-TRANSIENT RESPONSE 74 4.3 CIRCUIT IMPLEMENTATION 77 4.3.1 COMPARATOR-TRIGGERED OSCILLATOR DESIGN 77 4.3.2 SLOPE DETECTOR DESIGN 81 4.3.3 LUT-BASED SHIFT REGISTER DESIGN 84 4.3.4 BI-DIRECTIONAL LATCH-BASED DRIVER DESIGN 86 4.4 MEASUREMENT(SIMULATION) RESULTS 90 CHAPTER 5 CONCLUSION 95 BIBLIOGRAPHY 97 초 록 109박

A Ringamp-Assisted, Output Capacitor-less Analog CMOS Low-Dropout Voltage Regulator

Continued advancements in state-of-the-art integrated circuits have furthered trends toward higher computational performance and increased functionality within smaller circuit area footprints, all while improving power efficiencies to meet the demands of mobile and battery-powered applications. A significant portion of these advancements have been enabled by continued scaling of CMOS technology into smaller process node sizes, facilitating faster digital systems and power optimized computation. However, this scaling has degraded classic analog amplifying circuit structures with reduced voltage headroom and lower device output resistance; and thus, lower available intrinsic gain. This work investigates these trends and their impact for fine-grain Low-Dropout (LDO) Voltage Regulators, leading to a presented design methodology and implementation of a state-of-the-art Ringamp-Assisted, Output Capacitor-less Analog CMOS LDO Voltage Regulator capable of both power scaling and process node scaling for general SoC applications