A Robust Self-calibrating Transmission Scheme for On-Chip Networks

Systems-on-Chip (SoC) design involves several challenges, stemming from the extreme miniaturization of the physical features and from the large number of devices and wires on a chip. Since most SoCs are used within embedded systems, specific concerns are increasingly related to correct, reliable, and robust operation. We believe that in the future most SoCs will be assembled by using large-scale macro-cells and interconnected by means of on-chip networks. We examine some physical properties of on-chip interconnect busses, with the goal of achieving fast, reliable, and low-energy communication. These objectives are reached by dynamically scaling down the voltage swing, while ensuring data integrity-in spite of the decreased signal to noise ratio-by means of encoding and retransmission schemes. In particular, we describe a closed-loop voltage swing controller that samples the error retransmission rate to determine the operational voltage swing. We present a control policy which achieves our goals with minimal complexity; such simplicity is demonstrated by implementing the policy in a synthesizable controller. Such a controller is an embodiment of a self-calibrating circuit that compensates for significant manufacturing parameter deviations and environmental variations. Experimental results show that energy savings amount up to 42%, while at the same time meeting performance requirements

Synchronising coherent networked radar using low-cost GPS-disciplined oscillators

This text evaluates the feasibility of synchronising coherent, pulsed-Doppler, networked, radars with carrier frequencies of a few gigahertz and moderate bandwidths of tens of megahertz across short baselines of a few kilometres using low-cost quartz GPSDOs based on one-way GPS time transfer. It further assesses the use of line-of-sight (LOS) phase compensation, where the direct sidelobe breakthrough is used as the phase reference, to improve the GPS-disciplined oscillator (GPSDO) synchronised bistatic Doppler performance. Coherent bistatic, multistatic, and networked radars require accurate time, frequency, and phase synchronisation. Global positioning system (GPS) synchronisation is precise, low-cost, passive and covert, and appears well-suited to synchronise networked radar. However, very few published examples exist. An imperfectly synchronised bistatic transmitter-receiver is modelled. Measures and plots are developed enabling the rapid selection of appropriate synchronisation technologies. Three low-cost, open, versatile, and extensible, quartz-based GPSDOs are designed and calibrated at zero-baselines. These GPSDOs are uniquely capable of acquiring phase-lock four times faster than conventional phase-locked loops (PLLs) and a new time synchronisation mechanism enables low-jitter sub-10 ns oneway GPS time synchronisation. In collaboration with University College London, UK, the 2.4 GHz coherent pulsed-Doppler networked radar, called NetRAD, is synchronised using the University of Cape Town developed GPSDOs. This resulted in the first published example of pulsed-Doppler phase synchronisation using GPS. A tri-static experiment is set up in Simon’s Bay, South Africa, with a maximum baseline of 2.3 km. The Roman Rock lighthouse was used as a static target to simultaneously assess the range, frequency, phase, and Doppler performance of the monostatic, bistatic, and LOS phase corrected bistatic returns. The real-world results compare well to that predicted by the earlier developed bistatic model and zero-baseline calibrations. GPS timing limits the radar bandwidth to less than 37.5 MHz when it is required to synchronise to within the range resolution. Low-cost quartz GPSDOs offer adequate frequency synchronisation to ensure a target radial velocity accuracy of better than 1 km/h and frequency drift of less than the Doppler resolution over integration periods of one second or less. LOS phase compensation, when used in combination with low-cost GPSDOs, results in near monostatic pulsed-Doppler performance with a subclutter visibility improvement of about 30 dB

In-flight calibration and verification of the Planck-LFI instrument

In this paper we discuss the Planck-LFI in-flight calibration campaign. After a brief overview of the ground test campaigns, we describe in detail the calibration and performance verification (CPV) phase, carried out in space during and just after the cool-down of LFI. We discuss in detail the functionality verification, the tuning of the front-end and warm electronics, the preliminary performance assessment and the thermal susceptibility tests. The logic, sequence, goals and results of the in-flight tests are discussed. All the calibration activities were successfully carried out and the instrument response was comparable to the one observed on ground. For some channels the in-flight tuning activity allowed us to improve significantly the noise performance.Comment: Long technical paper on Planck LFI in flight calibration campaign: 109 pages in this (not final) version, 100 page in the final JINST versio

A virtual hand assessment system for efficient outcome measures of hand rehabilitation

Previously held under moratorium from 1st December 2016 until 1st December 2021.Hand rehabilitation is an extremely complex and critical process in the medical rehabilitation field. This is mainly due to the high articulation of the hand functionality. Recent research has focused on employing new technologies, such as robotics and system control, in order to improve the precision and efficiency of the standard clinical methods used in hand rehabilitation. However, the designs of these devices were either oriented toward a particular hand injury or heavily dependent on subjective assessment techniques to evaluate the progress. These limitations reduce the efficiency of the hand rehabilitation devices by providing less effective results for restoring the lost functionalities of the dysfunctional hands. In this project, a novel technological solution and efficient hand assessment system is produced that can objectively measure the restoration outcome and, dynamically, evaluate its performance. The proposed system uses a data glove sensorial device to measure the multiple ranges of motion for the hand joints, and a Virtual Reality system to return an illustrative and safe visual assistance environment that can self-adjust with the subject’s performance. The system application implements an original finger performance measurement method for analysing the various hand functionalities. This is achieved by extracting the multiple features of the hand digits’ motions; such as speed, consistency of finger movements and stability during the hold positions. Furthermore, an advanced data glove calibration method was developed and implemented in order to accurately manipulate the virtual hand model and calculate the hand kinematic movements in compliance with the biomechanical structure of the hand. The experimental studies were performed on a controlled group of 10 healthy subjects (25 to 42 years age). The results showed intra-subject reliability between the trials (average of crosscorrelation ρ = 0.7), inter-subject repeatability across the subject’s performance (p > 0.01 for the session with real objects and with few departures in some of the virtual reality sessions). In addition, the finger performance values were found to be very efficient in detecting the multiple elements of the fingers’ performance including the load effect on the forearm. Moreover, the electromyography measurements, in the virtual reality sessions, showed high sensitivity in detecting the tremor effect (the mean power frequency difference on the right Vextensor digitorum muscle is 176 Hz). Also, the finger performance values for the virtual reality sessions have the same average distance as the real life sessions (RSQ =0.07). The system, besides offering an efficient and quantitative evaluation of hand performance, it was proven compatible with different hand rehabilitation techniques where it can outline the primarily affected parts in the hand dysfunction. It also can be easily adjusted to comply with the subject’s specifications and clinical hand assessment procedures to autonomously detect the classification task events and analyse them with high reliability. The developed system is also adaptable with different disciplines’ involvements, other than the hand rehabilitation, such as ergonomic studies, hand robot control, brain-computer interface and various fields involving hand control.Hand rehabilitation is an extremely complex and critical process in the medical rehabilitation field. This is mainly due to the high articulation of the hand functionality. Recent research has focused on employing new technologies, such as robotics and system control, in order to improve the precision and efficiency of the standard clinical methods used in hand rehabilitation. However, the designs of these devices were either oriented toward a particular hand injury or heavily dependent on subjective assessment techniques to evaluate the progress. These limitations reduce the efficiency of the hand rehabilitation devices by providing less effective results for restoring the lost functionalities of the dysfunctional hands. In this project, a novel technological solution and efficient hand assessment system is produced that can objectively measure the restoration outcome and, dynamically, evaluate its performance. The proposed system uses a data glove sensorial device to measure the multiple ranges of motion for the hand joints, and a Virtual Reality system to return an illustrative and safe visual assistance environment that can self-adjust with the subject’s performance. The system application implements an original finger performance measurement method for analysing the various hand functionalities. This is achieved by extracting the multiple features of the hand digits’ motions; such as speed, consistency of finger movements and stability during the hold positions. Furthermore, an advanced data glove calibration method was developed and implemented in order to accurately manipulate the virtual hand model and calculate the hand kinematic movements in compliance with the biomechanical structure of the hand. The experimental studies were performed on a controlled group of 10 healthy subjects (25 to 42 years age). The results showed intra-subject reliability between the trials (average of crosscorrelation ρ = 0.7), inter-subject repeatability across the subject’s performance (p > 0.01 for the session with real objects and with few departures in some of the virtual reality sessions). In addition, the finger performance values were found to be very efficient in detecting the multiple elements of the fingers’ performance including the load effect on the forearm. Moreover, the electromyography measurements, in the virtual reality sessions, showed high sensitivity in detecting the tremor effect (the mean power frequency difference on the right Vextensor digitorum muscle is 176 Hz). Also, the finger performance values for the virtual reality sessions have the same average distance as the real life sessions (RSQ =0.07). The system, besides offering an efficient and quantitative evaluation of hand performance, it was proven compatible with different hand rehabilitation techniques where it can outline the primarily affected parts in the hand dysfunction. It also can be easily adjusted to comply with the subject’s specifications and clinical hand assessment procedures to autonomously detect the classification task events and analyse them with high reliability. The developed system is also adaptable with different disciplines’ involvements, other than the hand rehabilitation, such as ergonomic studies, hand robot control, brain-computer interface and various fields involving hand control

Commissioning a 400 Hz rotary inverter

Includes bibliographical references (leaves 113-115).This dissertation covers the commissioning and testing of an aircraft's constant frequency alternator as the power supply for the Blue Parrot radar. The Blue Parrot is an X-band radar which forms part of the navigation and weapon-aiming system onboard the Buccaneer S-50 SAAF aircraft. The radar set uses a source of three-phase power at 400 Hz, which the constant frequency alternator can supply with the aid of certain auxiliary systems. The auxiliary systems include a prime mover, blower fan and a telemetering system. The prime mover has high starting currents which were reduced significantly by the use of a soft-starter. During testing, the constant frequency alternator started overheating and a blower fan was selected based on its thermal requirements. Significant cooling of the constant frequency alternator's case temperature was achieved by the use of a blower fan and shroud. The generator control unit monitors and regulates all parameters on the unit except for case temperature and blower fan pressure. A telemetering system was designed and built to monitor and display these parameters

Constructing fail-controlled nodes for distributed systems: a software approach

PhD ThesisDesigning and implementing distributed systems which continue to provide specified services in the presence of processing site and communication failures is a difficult task. To facilitate their development, distributed systems have been built assuming that their underlying hardware components are Jail-controlled, i.e. present a well defined failure mode. However, if conventional hardware cannot provide the assumed failure mode, there is a need to build processing sites or nodes, and communication infra-structure that present the fail-controlled behaviour assumed. Coupling a number of redundant processors within a replicated node is a well known way of constructing fail-controlled nodes. Computation is replicated and executed simultaneously at each processor, and by employing suitable validation techniques to the outputs generated by processors (e.g. majority voting, comparison), outputs from faulty processors can be prevented from appearing at the application level. One way of constructing replicated nodes is by introducing hardwired mechanisms to couple replicated processors with specialised validation hardware circuits. Processors are tightly synchronised at the clock cycle level, and have their outputs validated by a reliable validation hardware. Another approach is to use software mechanisms to perform synchronisation of processors and validation of the outputs. The main advantage of hardware based nodes is the minimum performance overhead incurred. However, the introduction of special circuits may increase the complexity of the design tremendously. Further, every new microprocessor architecture requires considerable redesign overhead. Software based nodes do not present these problems, on the other hand, they introduce much bigger performance overheads to the system. In this thesis we investigate alternative ways of constructing efficient fail-controlled, software based replicated nodes. In particular, we present much more efficient order protocols, which are necessary for the implementation of these nodes. Our protocols, unlike others published to date, do not require processors' physical clocks to be explicitly synchronised. The main contribution of this thesis is the precise definition of the semantics of a software based Jail-silent node, along with its efficient design, implementation and performance evaluation.The Brazilian National Research Council (CNPq/Brasil)

Ubiquitous Integration and Temporal Synchronisation (UbilTS) framework : a solution for building complex multimodal data capture and interactive systems

Contemporary Data Capture and Interactive Systems (DCIS) systems are tied in with various technical complexities such as multimodal data types, diverse hardware and software components, time synchronisation issues and distributed deployment configurations. Building these systems is inherently difficult and requires addressing of these complexities before the intended and purposeful functionalities can be attained. The technical issues are often common and similar among diverse applications. This thesis presents the Ubiquitous Integration and Temporal Synchronisation (UbiITS) framework, a generic solution to address the technical complexities in building DCISs. The proposed solution is an abstract software framework that can be extended and customised to any application requirements. UbiITS includes all fundamental software components, techniques, system level layer abstractions and reference architecture as a collection to enable the systematic construction of complex DCISs. This work details four case studies to showcase the versatility and extensibility of UbiITS framework’s functionalities and demonstrate how it was employed to successfully solve a range of technical requirements. In each case UbiITS operated as the core element of each application. Additionally, these case studies are novel systems by themselves in each of their domains. Longstanding technical issues such as flexibly integrating and interoperating multimodal tools, precise time synchronisation, etc., were resolved in each application by employing UbiITS. The framework enabled establishing a functional system infrastructure in these cases, essentially opening up new lines of research in each discipline where these research approaches would not have been possible without the infrastructure provided by the framework. The thesis further presents a sample implementation of the framework on a device firmware exhibiting its capability to be directly implemented on a hardware platform. Summary metrics are also produced to establish the complexity, reusability, extendibility, implementation and maintainability characteristics of the framework.Engineering and Physical Sciences Research Council (EPSRC) grants - EP/F02553X/1, 114433 and 11394

Development of Smart, Compact Fusion Diagnostics using Field-Programmable Gate Arrays

Abstract: Fusion research requires high quality diagnostics to understand the complex physical processes involved. Traditional analogue systems are complex, large and expensive, and expansion of diagnostic capabilities is often impossible without building a completely new system at considerable expense. Field-programmable gate array (FPGA) technology can provide a solution to this problem. By implementing complex functionality and digital signal processing on an FPGA chip, diagnostic hardware can be greatly simplified and compacted. In this thesis we describe the enhancements of two diagnostics for the MAST-Upgrade tokamak using FPGA technology. Firstly, the design of the back end electronics for the new divertor bolometer is described. Results of tests of the new electronics at a number of sites, including lab-based testing and tokamak installations, are also presented. We demonstrate the correct functionality of the electronics and illustrate a number of important effects which must be taken into account when interpreting bolometer data on MAST-U. Secondly, we describe the new control and acquisition electronics developed for the MAST-U divertor Langmuir probe diagnostic. Much of the analogue control circuitry of the previous system has been upgraded to a digital implementation on an FPGA, which results in a significantly more compact and cost effective design. Given that MAST-Upgrade will feature around 850 Langmuir probes, these improvements are extremely important to keep the diagnostic manageable. Again, results are presented from the testing of the system at several sites, which both demonstrate the correct functionality of the new system and provide information on the diagnostic behaviour which needs to be accounted for when interpreting the probe data during MAST-U experiments

Staging China

In this volume Florian Schneider shows how mass media events fit into the political, economic, and cultural developments in China. Through expert interviews and empirical studies of production backgrounds and media contents, Schneider explores the communication strategies that informed the Beijing Olympics, the Shanghai Expo, and the 60th Anniversary of the PRC. The book discusses what the implications but also the limits of these strategies might be, and it shows to what degree different actors take advantage of China’s mass media events to shape political discourse. Through an in-depth engagement with theories of mass-communication and cultural governance, "Staging China" explores this vital dimension of political communication in contemporary China, providing a novel take on networked politics and legitimation