Transient error mitigation by means of approximate logic circuits

Mención Internacional en el título de doctorThe technological advances in the manufacturing of electronic circuits have allowed to greatly improve their performance, but they have also increased the sensitivity of electronic devices to radiation-induced errors. Among them, the most common effects are the SEEs, i.e., electrical perturbations provoked by the strike of high-energy particles, which may modify the internal state of a memory element (SEU) or generate erroneous transient pulses (SET), among other effects. These events pose a threat for the reliability of electronic circuits, and therefore fault-tolerance techniques must be applied to deal with them. The most common fault-tolerance techniques are based in full replication (DWC or TMR). These techniques are able to cover a wide range of failure mechanisms present in electronic circuits. However, they suffer from high overheads in terms of area and power consumption. For this reason, lighter alternatives are often sought at the expense of slightly reducing reliability for the least critical circuit sections. In this context a new paradigm of electronic design is emerging, known as approximate computing, which is based on improving the circuit performance in change of slight modifications of the intended functionality. This is an interesting approach for the design of lightweight fault-tolerant solutions, which has not been yet studied in depth. The main goal of this thesis consists in developing new lightweight fault-tolerant techniques with partial replication, by means of approximate logic circuits. These circuits can be designed with great flexibility. This way, the level of protection as well as the overheads can be adjusted at will depending on the necessities of each application. However, finding optimal approximate circuits for a given application is still a challenge. In this thesis a method for approximate circuit generation is proposed, denoted as fault approximation, which consists in assigning constant logic values to specific circuit lines. On the other hand, several criteria are developed to generate the most suitable approximate circuits for each application, by using this fault approximation mechanism. These criteria are based on the idea of approximating the least testable sections of circuits, which allows reducing overheads while minimising the loss of reliability. Therefore, in this thesis the selection of approximations is linked to testability measures. The first criterion for fault selection developed in this thesis uses static testability measures. The approximations are generated from the results of a fault simulation of the target circuit, and from a user-specified testability threshold. The amount of approximated faults depends on the chosen threshold, which allows to generate approximate circuits with different performances. Although this approach was initially intended for combinational circuits, an extension to sequential circuits has been performed as well, by considering the flip-flops as both inputs and outputs of the combinational part of the circuit. The experimental results show that this technique achieves a wide scalability, and an acceptable trade-off between reliability versus overheads. In addition, its computational complexity is very low. However, the selection criterion based in static testability measures has some drawbacks. Adjusting the performance of the generated approximate circuits by means of the approximation threshold is not intuitive, and the static testability measures do not take into account the changes as long as faults are approximated. Therefore, an alternative criterion is proposed, which is based on dynamic testability measures. With this criterion, the testability of each fault is computed by means of an implication-based probability analysis. The probabilities are updated with each new approximated fault, in such a way that on each iteration the most beneficial approximation is chosen, that is, the fault with the lowest probability. In addition, the computed probabilities allow to estimate the level of protection against faults that the generated approximate circuits provide. Therefore, it is possible to generate circuits which stick to a target error rate. By modifying this target, circuits with different performances can be obtained. The experimental results show that this new approach is able to stick to the target error rate with reasonably good precision. In addition, the approximate circuits generated with this technique show better performance than with the approach based in static testability measures. In addition, the fault implications have been reused too in order to implement a new type of logic transformation, which consists in substituting functionally similar nodes. Once the fault selection criteria have been developed, they are applied to different scenarios. First, an extension of the proposed techniques to FPGAs is performed, taking into account the particularities of this kind of circuits. This approach has been validated by means of radiation experiments, which show that a partial replication with approximate circuits can be even more robust than a full replication approach, because a smaller area reduces the probability of SEE occurrence. Besides, the proposed techniques have been applied to a real application circuit as well, in particular to the microprocessor ARM Cortex M0. A set of software benchmarks is used to generate the required testability measures. Finally, a comparative study of the proposed approaches with approximate circuit generation by means of evolutive techniques have been performed. These approaches make use of a high computational capacity to generate multiple circuits by trial-and-error, thus reducing the possibility of falling into local minima. The experimental results demonstrate that the circuits generated with evolutive approaches are slightly better in performance than the circuits generated with the techniques here proposed, although with a much higher computational effort. In summary, several original fault mitigation techniques with approximate logic circuits are proposed. These approaches are demonstrated in various scenarios, showing that the scalability and adaptability to the requirements of each application are their main virtuesLos avances tecnológicos en la fabricación de circuitos electrónicos han permitido mejorar en gran medida sus prestaciones, pero también han incrementado la sensibilidad de los mismos a los errores provocados por la radiación. Entre ellos, los más comunes son los SEEs, perturbaciones eléctricas causadas por el impacto de partículas de alta energía, que entre otros efectos pueden modificar el estado de los elementos de memoria (SEU) o generar pulsos transitorios de valor erróneo (SET). Estos eventos suponen un riesgo para la fiabilidad de los circuitos electrónicos, por lo que deben ser tratados mediante técnicas de tolerancia a fallos. Las técnicas de tolerancia a fallos más comunes se basan en la replicación completa del circuito (DWC o TMR). Estas técnicas son capaces de cubrir una amplia variedad de modos de fallo presentes en los circuitos electrónicos. Sin embargo, presentan un elevado sobrecoste en área y consumo. Por ello, a menudo se buscan alternativas más ligeras, aunque no tan efectivas, basadas en una replicación parcial. En este contexto surge una nueva filosofía de diseño electrónico, conocida como computación aproximada, basada en mejorar las prestaciones de un diseño a cambio de ligeras modificaciones de la funcionalidad prevista. Es un enfoque atractivo y poco explorado para el diseño de soluciones ligeras de tolerancia a fallos. El objetivo de esta tesis consiste en desarrollar nuevas técnicas ligeras de tolerancia a fallos por replicación parcial, mediante el uso de circuitos lógicos aproximados. Estos circuitos se pueden diseñar con una gran flexibilidad. De este forma, tanto el nivel de protección como el sobrecoste se pueden regular libremente en función de los requisitos de cada aplicación. Sin embargo, encontrar los circuitos aproximados óptimos para cada aplicación es actualmente un reto. En la presente tesis se propone un método para generar circuitos aproximados, denominado aproximación de fallos, consistente en asignar constantes lógicas a ciertas líneas del circuito. Por otro lado, se desarrollan varios criterios de selección para, mediante este mecanismo, generar los circuitos aproximados más adecuados para cada aplicación. Estos criterios se basan en la idea de aproximar las secciones menos testables del circuito, lo que permite reducir los sobrecostes minimizando la perdida de fiabilidad. Por tanto, en esta tesis la selección de aproximaciones se realiza a partir de medidas de testabilidad. El primer criterio de selección de fallos desarrollado en la presente tesis hace uso de medidas de testabilidad estáticas. Las aproximaciones se generan a partir de los resultados de una simulación de fallos del circuito objetivo, y de un umbral de testabilidad especificado por el usuario. La cantidad de fallos aproximados depende del umbral escogido, lo que permite generar circuitos aproximados con diferentes prestaciones. Aunque inicialmente este método ha sido concebido para circuitos combinacionales, también se ha realizado una extensión a circuitos secuenciales, considerando los biestables como entradas y salidas de la parte combinacional del circuito. Los resultados experimentales demuestran que esta técnica consigue una buena escalabilidad, y unas prestaciones de coste frente a fiabilidad aceptables. Además, tiene un coste computacional muy bajo. Sin embargo, el criterio de selección basado en medidas estáticas presenta algunos inconvenientes. No resulta intuitivo ajustar las prestaciones de los circuitos aproximados a partir de un umbral de testabilidad, y las medidas estáticas no tienen en cuenta los cambios producidos a medida que se van aproximando fallos. Por ello, se propone un criterio alternativo de selección de fallos, basado en medidas de testabilidad dinámicas. Con este criterio, la testabilidad de cada fallo se calcula mediante un análisis de probabilidades basado en implicaciones. Las probabilidades se actualizan con cada nuevo fallo aproximado, de forma que en cada iteración se elige la aproximación más favorable, es decir, el fallo con menor probabilidad. Además, las probabilidades calculadas permiten estimar la protección frente a fallos que ofrecen los circuitos aproximados generados, por lo que es posible generar circuitos que se ajusten a una tasa de fallos objetivo. Modificando esta tasa se obtienen circuitos aproximados con diferentes prestaciones. Los resultados experimentales muestran que este método es capaz de ajustarse razonablemente bien a la tasa de fallos objetivo. Además, los circuitos generados con esta técnica muestran mejores prestaciones que con el método basado en medidas estáticas. También se han aprovechado las implicaciones de fallos para implementar un nuevo tipo de transformación lógica, consistente en sustituir nodos funcionalmente similares. Una vez desarrollados los criterios de selección de fallos, se aplican a distintos campos. En primer lugar, se hace una extensión de las técnicas propuestas para FPGAs, teniendo en cuenta las particularidades de este tipo de circuitos. Esta técnica se ha validado mediante experimentos de radiación, los cuales demuestran que una replicación parcial con circuitos aproximados puede ser incluso más robusta que una replicación completa, ya que un área más pequeña reduce la probabilidad de SEEs. Por otro lado, también se han aplicado las técnicas propuestas en esta tesis a un circuito de aplicación real, el microprocesador ARM Cortex M0, utilizando un conjunto de benchmarks software para generar las medidas de testabilidad necesarias. Por ´último, se realiza un estudio comparativo de las técnicas desarrolladas con la generación de circuitos aproximados mediante técnicas evolutivas. Estas técnicas hacen uso de una gran capacidad de cálculo para generar múltiples circuitos mediante ensayo y error, reduciendo la posibilidad de caer en algún mínimo local. Los resultados confirman que, en efecto, los circuitos generados mediante técnicas evolutivas son ligeramente mejores en prestaciones que con las técnicas aquí propuestas, pero con un coste computacional mucho mayor. En definitiva, se proponen varias técnicas originales de mitigación de fallos mediante circuitos aproximados. Se demuestra que estas técnicas tienen diversas aplicaciones, haciendo de la flexibilidad y adaptabilidad a los requisitos de cada aplicación sus principales virtudes.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Raoul Velazco.- Secretario: Almudena Lindoso Muñoz.- Vocal: Jaume Segura Fuste

Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Low-Power and Error-Resilient VLSI Circuits and Systems.

Efficient low-power operation is critically important for the success of the next-generation signal processing applications. Device and supply voltage have been continuously scaled to meet a more constrained power envelope, but scaling has created resiliency challenges, including increasing timing faults and soft errors. Our research aims at designing low-power and robust circuits and systems for signal processing by drawing circuit, architecture, and algorithm approaches. To gain an insight into the system faults due to supply voltage reduction, we researched the two primary effects that determine the minimum supply voltage (VMIN) in Intel’s tri-gate CMOS technology, namely process variations and gate-dielectric soft breakdown. We determined that voltage scaling increases the timing window that sequential circuits are vulnerable. Thus, we proposed a new hold-time violation metric to define hold-time VMIN, which has been adopted as a new design standard. Device scaling increases soft errors which affect circuit reliability. Through extensive soft error characterization using two 65nm CMOS test chips, we studied the soft error mechanisms and its dependence on supply voltage and clock frequency. This study laid the foundation of the first 65nm DSP chip design for a NASA spaceflight project. To mitigate such random errors, we proposed a new confidence-driven architecture that effectively enhances the error resiliency of deeply scaled CMOS and post-CMOS circuits. Designing low-power resilient systems can effectively leverage application-specific algorithmic approaches. To explore design opportunities in the algorithmic domain, we demonstrate an application-specific detection and decoding processor for multiple-input multiple-output (MIMO) wireless communication. To enhance the receive error rate for a robust wireless communication, we designed a joint detection and decoding technique by enclosing detection and decoding in an iterative loop to enhance both interference cancellation and error reduction. A proof-of-concept chip design was fabricated for the next-generation 4x4 256QAM MIMO systems. Through algorithm-architecture optimizations and low-power circuit techniques, our design achieves significant improvements in throughput, energy efficiency and error rate, paving the way for future developments in this area.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/110323/1/uchchen_1.pd

Soft Error Resistant Design of the AES Cipher Using SRAM-based FPGA

This thesis presents a new architecture for the reliable implementation of the symmetric-key algorithm Advanced Encryption Standard (AES) in Field Programmable Gate Arrays (FPGAs). Since FPGAs are prone to soft errors caused by radiation, and AES is highly sensitive to errors, reliable architectures are of significant concern. Energetic particles hitting a device can flip bits in FPGA SRAM cells controlling all aspects of the implementation. Unlike previous research, heterogeneous error detection techniques based on properties of the circuit and functionality are used to provide adequate reliability at the lowest possible cost. The use of dual ported block memory for SubBytes, duplication for the control circuitry, and a new enhanced parity technique for MixColumns is proposed. Previous parity techniques cover single errors in datapath registers, however, soft errors can occur in the control circuitry as well as in SRAM cells forming the combinational logic and routing. In this research, propagation of single errors is investigated in the routed netlist. Weaknesses of the previous parity techniques are identified. Architectural redesign at the register-transfer level is introduced to resolve undetected single errors in both the routing and the combinational logic. Reliability of the AES implementation is not only a critical issue in large scale FPGA-based systems but also at both higher altitudes and in space applications where there are a larger number of energetic particles. Thus, this research is important for providing efficient soft error resistant design in many current and future secure applications

Conception, optimisation, et vérification formelle de techniques de tolérance aux fautes pour circuits

Technology shrinking and voltage scaling increase the risk of fault occurrences in digital circuits. To address this challenge, engineers use fault-tolerance techniques to mask or, at least, to detect faults. These techniques are especially needed in safety critical domains (e.g., aerospace, medical, nuclear, etc.), where ensuring the circuit functionality and fault-tolerance is crucial. However, the verification of functional and fault-tolerance properties is a complex problem that cannot be solved with simulation-based methodologies due to the need to check a huge number of executions and fault occurrence scenarios. The optimization of the overheads imposed by fault-tolerance techniques also requires the proof that the circuit keeps its fault-tolerance properties after the optimization.In this work, we propose a verification-based optimization of existing fault-tolerance techniques as well as the design of new techniques and their formal verification using theorem proving. We first investigate how some majority voters can be removed from Triple-Modular Redundant (TMR) circuits without violating their fault-tolerance properties. The developed methodology clarifies how to take into account circuit native error-masking capabilities that may exist due to the structure of the combinational part or due to the way the circuit is used and communicates with the surrounding device.Second, we propose a family of time-redundant fault-tolerance techniques as automatic circuit transformations. They require less hardware resources than TMR alternatives and could be easily integrated in EDA tools. The transformations are based on the novel idea of dynamic time redundancy that allows the redundancy level to be changed "on-the-fly" without interrupting the computation. Therefore, time-redundancy can be used only in critical situations (e.g., above Earth poles where the radiation level is increased), during the processing of crucial data (e.g., the encryption of selected data), or during critical processes (e.g., a satellite computer reboot).Third, merging dynamic time redundancy with a micro-checkpointing mechanism, we have created a double-time redundancy transformation capable of masking transient faults. Our technique makes the recovery procedure transparent and the circuit input/output behavior remains unchanged even under faults. Due to the complexity of that method and the need to provide full assurance of its fault-tolerance capabilities, we have formally certified the technique using the Coq proof assistant. The developed proof methodology can be applied to certify other fault-tolerance techniques implemented through circuit transformations at the netlist level.La miniaturisation de la gravure et l'ajustement dynamique du voltage augmentent le risque de fautes dans les circuits intégrés. Pour pallier cet inconvénient, les ingénieurs utilisent des techniques de tolérance aux fautes pour masquer ou, au moins, détecter les fautes. Ces techniques sont particulièrement utilisées dans les domaines critiques (aérospatial, médical, nucléaire, etc.) où les garanties de bon fonctionnement des circuits et leurs tolérance aux fautes sont cruciales. Cependant, la vérification de propriétés fonctionnelles et de tolérance aux fautes est un problème complexe qui ne peut être résolu par simulation en raison du grand nombre d'exécutions possibles et de scénarios d'occurrence des fautes. De même, l'optimisation des surcoûts matériels ou temporels imposés par ces techniques demande de garantir que le circuit conserve ses propriétés de tolérance aux fautes après optimisation.Dans cette thèse, nous décrivons une optimisation de techniques de tolérance aux fautes classiques basée sur des analyses statiques, ainsi que de nouvelles techniques basées sur la redondance temporelle. Nous présentons comment leur correction peut être vérifiée formellement à l'aide d'un assistant de preuves.Nous étudions d'abord comment certains voteurs majoritaires peuvent être supprimés des circuits basés sur la redondance matérielle triple (TMR) sans violer leurs propriétés de tolérance. La méthodologie développée prend en compte les particularités des circuits (par ex. masquage logique d'erreurs) et des entrées/sorties pour optimiser la technique TMR.Deuxièmement, nous proposons une famille de techniques utilisant la redondance temporelle comme des transformations automatiques de circuits. Elles demandent moins de ressources matérielles que TMR et peuvent être facilement intégrés dans les outils de CAO. Les transformations sont basées sur une nouvelle idée de redondance temporelle dynamique qui permet de modifier le niveau de redondance «à la volée» sans interrompre le calcul. Le niveau de redondance peut être augmenté uniquement dans les situations critiques (par exemple, au-dessus des pôles où le niveau de rayonnement est élevé), lors du traitement de données cruciales (par exemple, le cryptage de données sensibles), ou pendant des processus critiques (par exemple, le redémarrage de l'ordinateur d'un satellite).Troisièmement, en associant la redondance temporelle dynamique avec un mécanisme de micro-points de reprise, nous proposons une transformation avec redondance temporelle double capable de masquer les fautes transitoires. La procédure de recouvrement est transparente et le comportement entrée/sortie du circuit reste identique même lors d'occurrences de fautes. En raison de la complexité de cette méthode, la garantie totale de sa correction a nécessité une certification formelle en utilisant l'assistant de preuves Coq. La méthodologie développée peut être appliquée pour certifier d'autres techniques de tolérance aux fautes exprimées comme des transformations de circuits

Analysis and Design of Resilient VLSI Circuits

The reliable operation of Integrated Circuits (ICs) has become increasingly difficult to achieve in the deep sub-micron (DSM) era. With continuously decreasing device feature sizes, combined with lower supply voltages and higher operating frequencies, the noise immunity of VLSI circuits is decreasing alarmingly. Thus, VLSI circuits are becoming more vulnerable to noise effects such as crosstalk, power supply variations and radiation-induced soft errors. Among these noise sources, soft errors (or error caused by radiation particle strikes) have become an increasingly troublesome issue for memory arrays as well as combinational logic circuits. Also, in the DSM era, process variations are increasing at an alarming rate, making it more difficult to design reliable VLSI circuits. Hence, it is important to efficiently design robust VLSI circuits that are resilient to radiation particle strikes and process variations. The work presented in this dissertation presents several analysis and design techniques with the goal of realizing VLSI circuits which are tolerant to radiation particle strikes and process variations. This dissertation consists of two parts. The first part proposes four analysis and two design approaches to address radiation particle strikes. The analysis techniques for the radiation particle strikes include: an approach to analytically determine the pulse width and the pulse shape of a radiation induced voltage glitch in combinational circuits, a technique to model the dynamic stability of SRAMs, and a 3D device-level analysis of the radiation tolerance of voltage scaled circuits. Experimental results demonstrate that the proposed techniques for analyzing radiation particle strikes in combinational circuits and SRAMs are fast and accurate compared to SPICE. Therefore, these analysis approaches can be easily integrated in a VLSI design flow to analyze the radiation tolerance of such circuits, and harden them early in the design flow. From 3D device-level analysis of the radiation tolerance of voltage scaled circuits, several non-intuitive observations are made and correspondingly, a set of guidelines are proposed, which are important to consider to realize radiation hardened circuits. Two circuit level hardening approaches are also presented to harden combinational circuits against a radiation particle strike. These hardening approaches significantly improve the tolerance of combinational circuits against low and very high energy radiation particle strikes respectively, with modest area and delay overheads. The second part of this dissertation addresses process variations. A technique is developed to perform sensitizable statistical timing analysis of a circuit, and thereby improve the accuracy of timing analysis under process variations. Experimental results demonstrate that this technique is able to significantly reduce the pessimism due to two sources of inaccuracy which plague current statistical static timing analysis (SSTA) tools. Two design approaches are also proposed to improve the process variation tolerance of combinational circuits and voltage level shifters (which are used in circuits with multiple interacting power supply domains), respectively. The variation tolerant design approach for combinational circuits significantly improves the resilience of these circuits to random process variations, with a reduction in the worst case delay and low area penalty. The proposed voltage level shifter is faster, requires lower dynamic power and area, has lower leakage currents, and is more tolerant to process variations, compared to the best known previous approach. In summary, this dissertation presents several analysis and design techniques which significantly augment the existing work in the area of resilient VLSI circuit design

Approximate logic synthesis: a survey

Approximate computing is an emerging paradigm that, by relaxing the requirement for full accuracy, offers benefits in terms of design area and power consumption. This paradigm is particularly attractive in applications where the underlying computation has inherent resilience to small errors. Such applications are abundant in many domains, including machine learning, computer vision, and signal processing. In circuit design, a major challenge is the capability to synthesize the approximate circuits automatically without manually relying on the expertise of designers. In this work, we review methods devised to synthesize approximate circuits, given their exact functionality and an approximability threshold. We summarize strategies for evaluating the error that circuit simplification can induce on the output, which guides synthesis techniques in choosing the circuit transformations that lead to the largest benefit for a given amount of induced error. We then review circuit simplification methods that operate at the gate or Boolean level, including those that leverage classical Boolean synthesis techniques to realize the approximations. We also summarize strategies that take high-level descriptions, such as C or behavioral Verilog, and synthesize approximate circuits from these descriptions

Resilience of an embedded architecture using hardware redundancy

In the last decade the dominance of the general computing systems market has being replaced by embedded systems with billions of units manufactured every year. Embedded systems appear in contexts where continuous operation is of utmost importance and failure can be profound. Nowadays, radiation poses a serious threat to the reliable operation of safety-critical systems. Fault avoidance techniques, such as radiation hardening, have been commonly used in space applications. However, these components are expensive, lag behind commercial components with regards to performance and do not provide 100% fault elimination. Without fault tolerant mechanisms, many of these faults can become errors at the application or system level, which in turn, can result in catastrophic failures. In this work we study the concepts of fault tolerance and dependability and extend these concepts providing our own definition of resilience. We analyse the physics of radiation-induced faults, the damage mechanisms of particles and the process that leads to computing failures. We provide extensive taxonomies of 1) existing fault tolerant techniques and of 2) the effects of radiation in state-of-the-art electronics, analysing and comparing their characteristics. We propose a detailed model of faults and provide a classification of the different types of faults at various levels. We introduce an algorithm of fault tolerance and define the system states and actions necessary to implement it. We introduce novel hardware and system software techniques that provide a more efficient combination of reliability, performance and power consumption than existing techniques. We propose a new element of the system called syndrome that is the core of a resilient architecture whose software and hardware can adapt to reliable and unreliable environments. We implement a software simulator and disassembler and introduce a testing framework in combination with ERA’s assembler and commercial hardware simulators

Self-healing concepts involving fine-grained redundancy for electronic systems

The start of the digital revolution came through the metal-oxide-semiconductor field-effect transistor (MOSFET) in 1959 followed by massive integration onto a silicon die by means of constant down scaling of individual components. Digital systems for certain applications require fault-tolerance against faults caused by temporary or permanent influence. The most widely used technique is triple module redundancy (TMR) in conjunction with a majority voter, which is regarded as a passive fault mitigation strategy. Design by functional resilience has been applied to circuit structures for increased fault-tolerance and towards self-diagnostic triggered self-healing. The focus of this thesis is therefore to develop new design strategies for fault detection and mitigation within transistor, gate and cell design levels. The research described in this thesis makes three contributions. The first contribution is based on adding fine-grained transistor level redundancy to logic gates in order to accomplish stuck-at fault-tolerance. The objective is to realise maximum fault-masking for a logic gate with minimal added redundant transistors. In the case of non-maskable stuck-at faults, the gate structure generates an intrinsic indication signal that is suitable for autonomous self-healing functions. As a result, logic circuitry utilising this design is now able to differentiate between gate faults and faults occurring in inter-gate connections. This distinction between fault-types can then be used for triggering selective self-healing responses. The second contribution is a logic matrix element which applies the three core redundancy concepts of spatial- temporal- and data-redundancy. This logic structure is composed of quad-modular redundant structures and is capable of selective fault-masking and localisation depending of fault-type at the cell level, which is referred to as a spatiotemporal quadded logic cell (QLC) structure. This QLC structure has the capability of cellular self-healing. Through the combination of fault-tolerant and masking logic features the QLC is designed with a fault-behaviour that is equal to existing quadded logic designs using only 33.3% of the equivalent transistor resources. The inherent self-diagnosing feature of QLC is capable of identifying individual faulty cells and can trigger self-healing features. The final contribution is focused on the conversion of finite state machines (FSM) into memory to achieve better state transition timing, minimal memory utilisation and fault protection compared to common FSM designs. A novel implementation based on content-addressable type memory (CAM) is used to achieve this. The FSM is further enhanced by creating the design out of logic gates of the first contribution by achieving stuck-at fault resilience. Applying cross-data parity checking, the FSM becomes equipped with single bit fault detection and correction