Local Exponential Regulation of Nonholonomic Systems in Approximate Chained Form with Applications to Off-Axle Tractor-Trailers

Most of drift-less nonholonomic systems cannot be exactly converted to an nonholonomic chained form, a wealth of design tools developed for the control of nonholonomic chained form are thus not directly applicable to such systems. Nevertheless, there exists a class of systems that may be locally approximated by the nonholonomic chained form around certain equilibrium points. In this work, we propose a discontinuous and a smooth time-varying control laws respectively for the approximated nonholonomic chained form, guaranteeing local exponential convergence of state to the desired equilibrium point. An tractor towing off-axle trailers is taken as an example to illustrate the approaches

Control Of Nonh=holonomic Systems

Many real-world electrical and mechanical systems have velocity-dependent constraints in their dynamic models. For example, car-like robots, unmanned aerial vehicles, autonomous underwater vehicles and hopping robots, etc. Most of these systems can be transformed into a chained form, which is considered as a canonical form of these nonholonomic systems. Hence, study of chained systems ensure their wide applicability. This thesis studied the problem of continuous feed-back control of the chained systems while pursuing inverse optimality and exponential convergence rates, as well as the feed-back stabilization problem under input saturation constraints. These studies are based on global singularity-free state transformations and controls are synthesized from resulting linear systems. Then, the application of optimal motion planning and dynamic tracking control of nonholonomic autonomous underwater vehicles is considered. The obtained trajectories satisfy the boundary conditions and the vehicles\u27 kinematic model, hence it is smooth and feasible. A collision avoidance criteria is set up to handle the dynamic environments. The resulting controls are in closed forms and suitable for real-time implementations. Further, dynamic tracking controls are developed through the Lyapunov second method and back-stepping technique based on a NPS AUV II model. In what follows, the application of cooperative surveillance and formation control of a group of nonholonomic robots is investigated. A designing scheme is proposed to achieves a rigid formation along a circular trajectory or any arbitrary trajectories. The controllers are decentralized and are able to avoid internal and external collisions. Computer simulations are provided to verify the effectiveness of these designs

Adaptive control of uncertain nonholonomic systems in finite time

summary:In this paper, the finite-time stabilization problem of chained form systems with parametric uncertainties is investigated. A novel switching control strategy is proposed for adaptive finite-time control design with the help of Lyapunov-based method and time-rescaling technique. With the proposed control law, the uncertain closed-loop system under consideration is finite-time stable within a given settling time. An illustrative example is also given to show the effectiveness of the proposed controller

Practical Stabilization of Uncertain Nonholonomic Mobile Robots Based on Visual Servoing Model with Uncalibrated Camera Parameters

The practical stabilization problem is addressed for a class of uncertain nonholonomic mobile robots with uncalibrated visual parameters. Based on the visual servoing kinematic model, a new switching controller is presented in the presence of parametric uncertainties associated with the camera system. In comparison with existing methods, the new design method is directly used to control the original system without any state or input transformation, which is effective to avoid singularity. Under the proposed control law, it is rigorously proved that all the states of closed-loop system can be stabilized to a prescribed arbitrarily small neighborhood of the zero equilibrium point. Furthermore, this switching control technique can be applied to solve the practical stabilization problem of a kind of mobile robots with uncertain parameters (and angle measurement disturbance) which appeared in some literatures such as Morin et al. (1998), Hespanha et al. (1999), Jiang (2000), and Hong et al. (2005). Finally, the simulation results show the effectiveness of the proposed controller design approach

On Observer-Based Control of Nonlinear Systems

Filtering and reconstruction of signals play a fundamental role in modern signal processing, telecommunications, and control theory and are used in numerous applications. The feedback principle is an important concept in control theory. Many different control strategies are based on the assumption that all internal states of the control object are available for feedback. In most cases, however, only a few of the states or some functions of the states can be measured. This circumstance raises the need for techniques, which makes it possible not only to estimate states, but also to derive control laws that guarantee stability when using the estimated states instead of the true ones. For linear systems, the separation principle assures stability for the use of converging state estimates in a stabilizing state feedback control law. In general, however, the combination of separately designed state observers and state feedback controllers does not preserve performance, robustness, or even stability of each of the separate designs. In this thesis, the problems of observer design and observer-based control for nonlinear systems are addressed. The deterministic continuous-time systems have been in focus. Stability analysis related to the Positive Real Lemma with relevance for output feedback control is presented. Separation results for a class of nonholonomic nonlinear systems, where the combination of independently designed observers and state-feedback controllers assures stability in the output tracking problem are shown. In addition, a generalization to the observer-backstepping method where the controller is designed with respect to estimated states, taking into account the effects of the estimation errors, is presented. Velocity observers with application to ship dynamics and mechanical manipulators are also presented

Feedback Linearization Techniques for Collaborative Nonholonomic Robots

Collaborative robots performing tasks together have significant advantages over a single robot. Applications can be found in the fields of underwater robotics, air traffic control, intelligent highways, mines and ores detection and tele-surgery. Collaborative wheeled mobile robots can be modeled by a nonlinear system having nonholonomic constraints. Due to these constraints, the collaborative robots arc not stabilizable at a point by continuous time-invariant feedback control laws. Therefore, linear control is ineffective, even locally, and innovative design techniques are needed. One possible design technique is feedback control and the principal interest of this thesis is to evaluate the best feedback control technique. Feedback linearization is one of the possible feedback control techniques. Feedback linearization is a method of transforming a nonlinear system into a linear system using feedback transformation. It differs from conventional Taylor series linearization since it is achieved using exact coordinates transformation rather than by linear approximations of the system. Linearization of the collaborative robots system using Taylor series results in a linear system which is uncontrollable and is thus unsuitable. On the other hand, the feedback linearized control strategies result in a stable system. Feedback linearized control strategies can he designed based on state or input, while both state and input linearization can be achieved using static or dynamic feedback. In this thesis, a kinematic model of the collaborative nonholonomic robots is derived, based on the leader-follower formation. The objective of the kinematic model is to facilitate the design of feedback control strategies that can stabilize the system and Minimize the error between the desired and actual trajectory. The leader-follower formation is used in this research since the collaborative robots are assumed to have communication capabilities only. The kinematic model for the leader-follower formation is simulated using MATLAB/Simulink. A comparative assessment of various feedback control strategies is evaluated. The leader robot model is tested using five feedback control strategies for different trajectories. These feedback control strategies are derived using cascaded system theory, stable tracking method based on linearization of corresponding error model, approximation linearization, nonlinear control design and full state linearization via dynamic feedback. For posture stabilization of the leader robot, time-varying and full state dynamic feedback linearized control strategies are used. For the follower robots using separation bearing and separation-separation formation, the feedback linearized control strategies are derived using input-output via static feedback. Based on the simulation results for the leader robot, it is found that the full state dynamic feedback linearized control strategy improves system performance and minimizes the mean of error more rapidly than the other four feedback control strategies. In addition to stabilizing the system, the full state dynamic feedback linearized control strategy achieves posture stabilization. For the follower robots, the input-output via static feedback linearization control strategies minimize the error between the desired and actual formation. Furthermore, the input-output linearized control strategies allow dynamical change of the formation at run-time and minimize the disturbance of formation change. Thus, for a given feasible trajectory, the full state feedback linearized strategy for the leader robot and input-output feedback linearized strategies for the follower robots are found to be more efficient in stabilizing the system

Adaptive multiple-surface sliding mode control of nonholonomic systems with matched and unmatched uncertainties

The problem of stabilizing a class of nonholonomic systems in chained form affected by both matched and unmatched uncertainties is addressed in this paper. The proposed design methodology is based on a discontinuous transformation of the perturbed nonholonomic system to which an adaptive multiple-surface sliding mode technique is applied. The generation of a sliding mode allows to eliminate the effect of matched uncertainties, while a suitable function approximation technique enables to deal with the residual uncertainties, which are unmatched. The control problem is solved by choosing a particular sliding manifold upon which a second order sliding mode is enforced via a continuous control with discontinuous derivative. A positive feature of the present proposal, apart from the fact of being capable of dealing with the presence of both matched and unmatched uncertainties, is that no knowledge of the bounds of the unmatched uncertainty terms is required. Moreover, the fact of producing a continuous control makes the proposed approach particularly appropriate in nonholonomic applications, such as those of mechanical nature