2,072 research outputs found
A Comprehensive Performance Evaluation of Deformable Face Tracking "In-the-Wild"
Recently, technologies such as face detection, facial landmark localisation
and face recognition and verification have matured enough to provide effective
and efficient solutions for imagery captured under arbitrary conditions
(referred to as "in-the-wild"). This is partially attributed to the fact that
comprehensive "in-the-wild" benchmarks have been developed for face detection,
landmark localisation and recognition/verification. A very important technology
that has not been thoroughly evaluated yet is deformable face tracking
"in-the-wild". Until now, the performance has mainly been assessed
qualitatively by visually assessing the result of a deformable face tracking
technology on short videos. In this paper, we perform the first, to the best of
our knowledge, thorough evaluation of state-of-the-art deformable face tracking
pipelines using the recently introduced 300VW benchmark. We evaluate many
different architectures focusing mainly on the task of on-line deformable face
tracking. In particular, we compare the following general strategies: (a)
generic face detection plus generic facial landmark localisation, (b) generic
model free tracking plus generic facial landmark localisation, as well as (c)
hybrid approaches using state-of-the-art face detection, model free tracking
and facial landmark localisation technologies. Our evaluation reveals future
avenues for further research on the topic.Comment: E. Antonakos and P. Snape contributed equally and have joint second
authorshi
Visibility Constrained Generative Model for Depth-based 3D Facial Pose Tracking
In this paper, we propose a generative framework that unifies depth-based 3D
facial pose tracking and face model adaptation on-the-fly, in the unconstrained
scenarios with heavy occlusions and arbitrary facial expression variations.
Specifically, we introduce a statistical 3D morphable model that flexibly
describes the distribution of points on the surface of the face model, with an
efficient switchable online adaptation that gradually captures the identity of
the tracked subject and rapidly constructs a suitable face model when the
subject changes. Moreover, unlike prior art that employed ICP-based facial pose
estimation, to improve robustness to occlusions, we propose a ray visibility
constraint that regularizes the pose based on the face model's visibility with
respect to the input point cloud. Ablation studies and experimental results on
Biwi and ICT-3DHP datasets demonstrate that the proposed framework is effective
and outperforms completing state-of-the-art depth-based methods
LiveCap: Real-time Human Performance Capture from Monocular Video
We present the first real-time human performance capture approach that
reconstructs dense, space-time coherent deforming geometry of entire humans in
general everyday clothing from just a single RGB video. We propose a novel
two-stage analysis-by-synthesis optimization whose formulation and
implementation are designed for high performance. In the first stage, a skinned
template model is jointly fitted to background subtracted input video, 2D and
3D skeleton joint positions found using a deep neural network, and a set of
sparse facial landmark detections. In the second stage, dense non-rigid 3D
deformations of skin and even loose apparel are captured based on a novel
real-time capable algorithm for non-rigid tracking using dense photometric and
silhouette constraints. Our novel energy formulation leverages automatically
identified material regions on the template to model the differing non-rigid
deformation behavior of skin and apparel. The two resulting non-linear
optimization problems per-frame are solved with specially-tailored
data-parallel Gauss-Newton solvers. In order to achieve real-time performance
of over 25Hz, we design a pipelined parallel architecture using the CPU and two
commodity GPUs. Our method is the first real-time monocular approach for
full-body performance capture. Our method yields comparable accuracy with
off-line performance capture techniques, while being orders of magnitude
faster
FML: Face Model Learning from Videos
Monocular image-based 3D reconstruction of faces is a long-standing problem
in computer vision. Since image data is a 2D projection of a 3D face, the
resulting depth ambiguity makes the problem ill-posed. Most existing methods
rely on data-driven priors that are built from limited 3D face scans. In
contrast, we propose multi-frame video-based self-supervised training of a deep
network that (i) learns a face identity model both in shape and appearance
while (ii) jointly learning to reconstruct 3D faces. Our face model is learned
using only corpora of in-the-wild video clips collected from the Internet. This
virtually endless source of training data enables learning of a highly general
3D face model. In order to achieve this, we propose a novel multi-frame
consistency loss that ensures consistent shape and appearance across multiple
frames of a subject's face, thus minimizing depth ambiguity. At test time we
can use an arbitrary number of frames, so that we can perform both monocular as
well as multi-frame reconstruction.Comment: CVPR 2019 (Oral). Video: https://www.youtube.com/watch?v=SG2BwxCw0lQ,
Project Page: https://gvv.mpi-inf.mpg.de/projects/FML19
Efficient illumination independent appearance-based face tracking
One of the major challenges that visual tracking algorithms face nowadays is being
able to cope with changes in the appearance of the target during tracking. Linear
subspace models have been extensively studied and are possibly the most popular
way of modelling target appearance. We introduce a linear subspace representation
in which the appearance of a face is represented by the addition of two approxi-
mately independent linear subspaces modelling facial expressions and illumination
respectively. This model is more compact than previous bilinear or multilinear ap-
proaches. The independence assumption notably simplifies system training. We only
require two image sequences. One facial expression is subject to all possible illumina-
tions in one sequence and the face adopts all facial expressions under one particular
illumination in the other. This simple model enables us to train the system with
no manual intervention. We also revisit the problem of efficiently fitting a linear
subspace-based model to a target image and introduce an additive procedure for
solving this problem. We prove that Matthews and Baker’s Inverse Compositional
Approach makes a smoothness assumption on the subspace basis that is equiva-
lent to Hager and Belhumeur’s, which worsens convergence. Our approach differs
from Hager and Belhumeur’s additive and Matthews and Baker’s compositional ap-
proaches in that we make no smoothness assumptions on the subspace basis. In the
experiments conducted we show that the model introduced accurately represents
the appearance variations caused by illumination changes and facial expressions.
We also verify experimentally that our fitting procedure is more accurate and has
better convergence rate than the other related approaches, albeit at the expense of
a slight increase in computational cost. Our approach can be used for tracking a
human face at standard video frame rates on an average personal computer
3D Human Face Reconstruction and 2D Appearance Synthesis
3D human face reconstruction has been an extensive research for decades due to its wide applications, such as animation, recognition and 3D-driven appearance synthesis. Although commodity depth sensors are widely available in recent years, image based face reconstruction are significantly valuable as images are much easier to access and store.
In this dissertation, we first propose three image-based face reconstruction approaches according to different assumption of inputs.
In the first approach, face geometry is extracted from multiple key frames of a video sequence with different head poses. The camera should be calibrated under this assumption.
As the first approach is limited to videos, we propose the second approach then focus on single image. This approach also improves the geometry by adding fine grains using shading cue. We proposed a novel albedo estimation and linear optimization algorithm in this approach.
In the third approach, we further loose the constraint of the input image to arbitrary in the wild images. Our proposed approach can robustly reconstruct high quality model even with extreme expressions and large poses.
We then explore the applicability of our face reconstructions on four interesting applications: video face beautification, generating personalized facial blendshape from image sequences, face video stylizing and video face replacement. We demonstrate great potentials of our reconstruction approaches on these real-world applications. In particular, with the recent surge of interests in VR/AR, it is increasingly common to see people wearing head-mounted displays. However, the large occlusion on face is a big obstacle for people to communicate in a face-to-face manner. Our another application is that we explore hardware/software solutions for synthesizing the face image with presence of HMDs. We design two setups (experimental and mobile) which integrate two near IR cameras and one color camera to solve this problem. With our algorithm and prototype, we can achieve photo-realistic results.
We further propose a deep neutral network to solve the HMD removal problem considering it as a face inpainting problem. This approach doesn\u27t need special hardware and run in real-time with satisfying results
Multi-Scale 3D Scene Flow from Binocular Stereo Sequences
Scene flow methods estimate the three-dimensional motion field for points in the world, using multi-camera video data. Such methods combine multi-view reconstruction with motion estimation. This paper describes an alternative formulation for dense scene flow estimation that provides reliable results using only two cameras by fusing stereo and optical flow estimation into a single coherent framework. Internally, the proposed algorithm generates probability distributions for optical flow and disparity. Taking into account the uncertainty in the intermediate stages allows for more reliable estimation of the 3D scene flow than previous methods allow. To handle the aperture problems inherent in the estimation of optical flow and disparity, a multi-scale method along with a novel region-based technique is used within a regularized solution. This combined approach both preserves discontinuities and prevents over-regularization – two problems commonly associated with the basic multi-scale approaches. Experiments with synthetic and real test data demonstrate the strength of the proposed approach.National Science Foundation (CNS-0202067, IIS-0208876); Office of Naval Research (N00014-03-1-0108
3D Face Modelling, Analysis and Synthesis
Human faces have always been of a special interest to researchers in the computer vision and graphics areas. There has been an explosion in the number of studies around accurately modelling, analysing and synthesising realistic faces for various applications. The importance of human faces emerges from the fact that they are invaluable means of effective communication, recognition, behaviour analysis, conveying emotions, etc. Therefore, addressing the automatic visual perception of human faces efficiently could open up many influential applications in various domains, e.g. virtual/augmented reality, computer-aided surgeries, security and surveillance, entertainment, and many more. However, the vast variability associated with the geometry and appearance of human faces captured in unconstrained videos and images renders their automatic analysis and understanding very challenging even today.
The primary objective of this thesis is to develop novel methodologies of 3D computer vision for human faces that go beyond the state of the art and achieve unprecedented quality and robustness. In more detail, this thesis advances the state of the art in 3D facial shape reconstruction and tracking, fine-grained 3D facial motion estimation, expression recognition and facial synthesis with the aid of 3D face modelling. We give a special attention to the case where the input comes from monocular imagery data captured under uncontrolled settings, a.k.a. \textit{in-the-wild} data. This kind of data are available in abundance nowadays on the internet. Analysing these data pushes the boundaries of currently available computer vision algorithms and opens up many new crucial applications in the industry. We define the four targeted vision problems (3D facial reconstruction tracking, fine-grained 3D facial motion estimation, expression recognition, facial synthesis) in this thesis as the four 3D-based essential systems for the automatic facial behaviour understanding and show how they rely on each other. Finally, to aid the research conducted in this thesis, we collect and annotate a large-scale videos dataset of monocular facial performances. All of our proposed methods demonstarte very promising quantitative and qualitative results when compared to the state-of-the-art methods
- …