Investigation of HAPs Propagation Channel for Wireless Access in a Tropical Region at Ka-Band

In the last few years, High Altitude Platforms (HAPs) have attracted considerable effort due to their ability to exploit the advantages of satellite and terrestrial-based systems. Rain attenuation is the most dominant atmospheric impairment, especially at such frequency band. This paper addresses the modelling of rain attenuation and describes a propagation channel model for HAPs at Ka-band to provide efficient and robust wireless access for tropical regions. The attenuation due to rain is modeled based on three years measured data for Johor Bahru to estimate the actual effect of rain on signals at Ka band. The radio propagation channel is usually characterized as a random multipath channel. Specifically, a statistical derivation of probability distribution function for Rayleigh and Rician fading channels are presented. The model consists of multiple path scattering effects, time dispersion, and Doppler shifts acting on the HAPs communication link. Simulation results represent the fading signal level variations. Results show perfect agreement between simulation and theoretical, thereby conforming to the multipath structures. The information obtained will be useful to system engineers for HAPs link budget analysis in order to obtain the required fade margin for optimal system performance in tropical regions

Multipath propagation model for high altitude platform (HAP) based on circular straigh cone geometry

A geometric model that describes a multipath propagation for a fixed wireless communication system between a High Altitude Platform and a fixed terrestrial user is presented. The model describes the propagation of the reflected signals that are able to reach the receiver as a consequence of all the scatterers located inside the system coverage area. The establishment of a particular geometry characterizing the system coverage area allows the behavior of the multipath phenomenon effects to be modeled accurately.Postprint (published version

Contributions to channel modelling and performance estimation of HAPS-based communication systems regarding IEEE Std 802.16TM

New and future telecommunication networks are and will be broadband type. The existing terrestrial and space radio communication infrastructures might be supplemented by new wireless networks that make and will make use of aeronautics-technology. Our study/contribution is referring to radio communications based on radio stations aboard a stratospheric platform named, by ITU-R, HAPS (High Altitude Platform Station). These new networks have been proposed as an alternative technology within the ITU framework to provide various narrow/broadband communication services. With the possibility of having a payload for Telecommunications in an aircraft or a balloon (HAPS), it can be carried out radio communications to provide backbone connections on ground and to access to broadband points for ground terminals. The latest implies a complex radio network planning. Therefore, the radio coverage analysis at outdoors and indoors becomes an important issue on the design of new radio systems. In this doctoral thesis, the contribution is related to the HAPS application for terrestrial fixed broadband communications. HAPS was hypothesised as a quasi-static platform with height above ground at the so-called stratospheric layer. Latter contribution was fulfilled by approaching via simulations the outdoor-indoor coverage with a simple efficient computational model at downlink mode. This work was assessing the ITU-R recommendations at bands recognised for the HAPS-based networks. It was contemplated the possibility of operating around 2 GHz (1820 MHz, specifically) because this band is recognised as an alternative for HAPS networks that can provide IMT-2000 and IMT-Advanced services. The global broadband radio communication model was composed of three parts: transmitter, channel, and receiver. The transmitter and receiver parts were based on the specifications of the IEEE Std 802.16TM-2009 (with its respective digital transmission techniques for a robust-reliable link), and the channel was subjected to the analysis of radio modelling at the level of HAPS and terrestrial (outdoors plus indoors) parts. For the channel modelling was used the two-state characterisation (physical situations associated with the transmitted/received signals), the state-oriented channel modelling. One of the channel-state contemplated the environmental transmission situation defined by a direct path between transmitter and receiver, and the remaining one regarded the conditions of shadowing. These states were dependent on the elevation angle related to the ray-tracing analysis: within the propagation environment, it was considered that a representative portion of the total energy of the signal was received by a direct or diffracted wave, and the remaining power signal was coming by a specular wave, to last-mentioned waves (rays) were added the scattered and random rays that constituted the diffuse wave. At indoors case, the variations of the transmitted signal were also considering the following matters additionally: the building penetration, construction material, angle of incidence, floor height, position of terminal in the room, and indoor fading; also, these indoors radiocommunications presented different type of paths to reach the receiver: obscured LOS, no LOS (NLOS), and hard NLOS. The evaluation of the feasible performance for the HAPS-to-ground terminal was accomplished by means of thorough simulations. The outcomes of the experiment were presented in terms of BER vs. Eb/N0 plotting, getting significant positive conclusions for these kind of system as access network technology based on HAPS

A Survey of Air-to-Ground Propagation Channel Modeling for Unmanned Aerial Vehicles

In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, ease of availability, and ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail when compared to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios

Drone Small Cells in the Clouds: Design, Deployment and Performance Analysis

The use of drone small cells (DSCs) which are aerial wireless base stations that can be mounted on flying devices such as unmanned aerial vehicles (UAVs), is emerging as an effective technique for providing wireless services to ground users in a variety of scenarios. The efficient deployment of such DSCs while optimizing the covered area is one of the key design challenges. In this paper, considering the low altitude platform (LAP), the downlink coverage performance of DSCs is investigated. The optimal DSC altitude which leads to a maximum ground coverage and minimum required transmit power for a single DSC is derived. Furthermore, the problem of providing a maximum coverage for a certain geographical area using two DSCs is investigated in two scenarios; interference free and full interference between DSCs. The impact of the distance between DSCs on the coverage area is studied and the optimal distance between DSCs resulting in maximum coverage is derived. Numerical results verify our analytical results on the existence of optimal DSCs altitude/separation distance and provide insights on the optimal deployment of DSCs to supplement wireless network coverage