Site specific process design for Hybrid CSP-Waste plants

[EN]In this paper the features of hybrid CSP – Waste power plants are evaluated as a function of the location. The process integrates waste and concentrated solar within a combined cycle. The model is solved as a non-linear optimization problem within a multiperiod scheme to decide on the contribution of the energy resources and the operating conditions of the facility to meet a demand of 25 MW over a year as a function of the resource availability, solar and waste. Urban and rural areas of 5 different regions are considered selecting different types of waste, cattle and pig manure in rural areas and sludge and organic municipal solid waste (OMSW) in urban areas. The results yield that cattle slurry is selected over pig manure and OMSW over sludge. Only rural areas have enough waste to meet the demand constantly. Reaching the demand represents more than 50% additional investment on waste processing units. As a result, to ensure meeting the demand the cost of electricity increases by 30% compared to a CSP plant that produces following solar availability.Junta Castilla y Leó

Identifying opportunities for developing CSP and PV-CSP hybrid projects under current tender conditions and market perspectives in MENA – benchmarking with PV-CCGT

Concentrating solar power (CSP) is one of the promising renewable energy technologies provided the fact that it is equipped with a cost-efficient storage system, thermal energy storage (TES). This solves the issue of intermittency of other renewable energy technologies and gives the advantage of achieving higher capacity factors and lower levelized costs of electricity (LCOE). This is the main reason why solar tower power plants (STPP) with molten salts and integrated TES are considered one of the most promising CSP technologies in the short term [1]. On the other hand, solar photovoltaic (PV) is a technology whose costs have been decreasing and are expected to continue doing so thus providing competitive LCOE values, but with relatively low capacity factors as electrical storage systems remain not cost-effective. Combining advantages and eliminating drawbacks of both technologies (CSP and PV), Hybridized PV-CSP power plants can be deemed as a competitive economic solution to offer firm output power when CSP is operated smartly so that its load is regulated in response to the PV output. Indeed previous works, have identified that it would allow achieving lower LCOEs than stand-alone CSP plants by means of allowing it to better utilize the solar field for storing energy during the daytime while PV is used [1]. On the fossil-based generation side, the gas turbine combined cycle (CCGT) occupies an outstanding position among power generation technologies. This is due to the fact that it is considered the most efficient fossil fuel-to-electricity converter, in addition to the maturity of such technology, high flexibility, and the generally low LCOE, which is largely dominated by fuel cost and varies depending on the natural gas price at a specific location. Obviously, the main drawback is the generated carbon emissions. In countries rich in natural gas resources and with vast potential for renewable energies implementation, such as the United Arab Emirates (UAE), abandoning a low LCOE technology with competitively low emissions – compared to coal or oil - and heading to costly pure renewable generation, seems like an aggressive plan. Therefore, hybridizing CCGT with renewable generation can be considered an attractive option for reducing emissions at reasonable costs. This is the case of the UAE with vast resources of both natural gas and solar energy. Previous work have shown the advantages of hybrid PV-CCGT and hybrid PV-CSP plants separately [1][2]. In this thesis, CSP and the two hybrid systems are compared on the basis of LCOE and CO2 emissions for a same firm-power capacity factor when considering a location in the UAE. The results are compared against each other to highlight the benefits of each technology from both environmental and economic standpoints and provide recommendations for future work in the field. The techno-economic analysis of CSP (STPP with TES), PV-CSP(STPP with TES) and PV-CCGT power plants have been performed by DYESOPT, an in-house tool developed in KTH, which runs techno-economic performance evaluation of power plants through multi-objective optimization for specific locations[1]. For this thesis, a convenient location in the UAE was chosen for simulating the performance of the plants. The UAE is endowed by the seventh-largest proven natural gas reserves and average to high global horizontal irradiation (GHI) and direct normal irradiation (DNI) values all year round, values considered to be lower than other countries in the MENA region due to its high aerosol concentrations and sand storms. The plants were designed to provide firm power in two cases, first as baseload, and second as intermediate load of 15 hours from 6:00 until 21:00. The hours of production were selected based on a typical average daily load profile. CSP and PV-CSP model previously developed by [3][1] were used. Ideally in the PV-CSP model, during daytime hours the PV generation is used for electricity production, covering the desired load, while CSP is used partly for electricity production and the rest for storing energy in the TES. Energy in the TES system is then used to supply firm power during both periods of low Irradiance and night hours or according to need. A PV-CCGT model has been developed which operates simultaneously, prioritizing the availability of PV while the CCGT fulfils the remaining requirement. There is a minimum loading for the CCGT plant which is determined by the minimum possible partial loading of the gas turbine restricted by the emission constraints. Accordingly, in some cases during operation PV is chosen to be curtailed due to this limitation. The main results of the techno-economic analysis are concluded in the comparative analysis of the 3 proposed power plant configurations, where the PV-CCGT plant is the most economic with minimum LCOE of 86 USD/MWh, yet, the least preferable option in terms of carbon emissions. CSP and PV-CSP provided higher LCOE, while the PV-CSP plant configuration met the same capacity factor with 11% reduction in LCOE, compared to CSP

Concentrated Solar Power: Actual Performance and Foreseeable Future in High Penetration Scenarios of Renewable Energies

Producción CientíficaAnalyses proposing a high share of concentrated solar power (CSP) in future 100% renewable energy scenarios rely on the ability of this technology, through storage and/or hybridization, to partially avoid the problems associated with the hourly/daily (short-term) variability of other variable renewable sources such as wind or solar photovoltaic. However, data used in the scientific literature are mainly theoretical values. In this work, the actual performance of CSP plants in operation from publicly available data from four countries (Spain, the USA, India, and United Arab Emirates) has been estimated for three dimensions: capacity factor (CF), seasonal variability, and energy return on energy invested (EROI). In fact, the results obtained show that the actual performance of CSP plants is significantly worse than that projected by constructors and considered by the scientific literature in the theoretical studies: a CF in the range of 0.15–0.3, low standard EROI (1.3:1–2.4:1), intensive use of materials—some scarce, and significant seasonal intermittence. In the light of the obtained results, the potential contribution of current CSP technologies in a future 100% renewable energy system seems very limited.Ministerio de Economía, Industria y Competitividad (Project FJCI-2016-28833)European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 69128

Market Potential Analysis of a Solar Hybrid Dish-Brayton System

In this study, the market potential of a solar hybrid dish-Brayton system has been analyzed, using a market analysis of four relevant industries and the techno economic analysis of the system, operating in a stand-alone configuration. The industries assessed were desalination, produce drying, Steam Methane Reforming for Hydrogen Production and Compressed air for the mining industry. After taking into consideration, the various factors that affect each industry, the applicability of the technology in industrial processes varies. It was found that the technology would be a good fit in small scale applications in remote locations for both desalination and for supplying compressed air in the mining industry. Produce Drying requires the targeted industries to be well-established, large-scale players wanting to decarbonize their processes. Owing to the prohibitive initial capital of the system, it would not be feasible with small scale market players. In locations where there was high DNI and higher costs of natural gas, the technology can be used in the thermal process in Steam Methane reforming for Hydrogen production. The techno economic analysis was carried out in three different locations, that has high DNI and relevant industries present. It was found that the price of natural gas and the DNI plays the major role in determining the Levelized cost of Energy at a location. The biggest costs factor in the initial capital spent was the expense of the dish. Future developments in cheaper material with similar levels of reflectivity, and the economies of scale, due to increase of production, stemming from increased demand would reduce the cost of the technologyObjectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminan

Enabling concentrating solar power in Australia : an investigation of the benefits and potential role of concentrating solar power and non-conventional fuel hybrid plants in Australia's transition to a low-carbon energy future

University of Technology, Sydney. Institute for Sustainable Futures.After decades of stability the Australian electricity market is undergoing changes. Current government targets aim to reduce greenhouse gas emissions by 5% and raise renewable electricity production to 45 TWh by 2020. In addition, increases to natural gas prices, aging generation assets and falling electricity demand have had an impact in recent years. Uncertainties exist around current policies, including the carbon pricing mechanism and the renewable energy target, but in light of Australian and international ambitions to lower greenhouse gas emissions the deployment of renewable energy technologies is essential. In recent years wind and photovoltaic installations have shown the highest renewable energy growth rates while concentrating solar power has struggled, despite Australia having some of the best natural resources for concentrating solar power in the world and some selected government funding. Reasons for the slow uptake include the comparatively high cost and lack of financial incentives. While technology costs are expected to decrease by up to 40% by 2020 through deployment as well as research and development, other cost reduction options have to be identified to promote short-term implementation in electricity markets such as Australia where the wholesale cost is low. To overcome the cost problem and to address other relevant implementation barriers this research analyses the hybridisation of concentrating solar power with biomass and waste feedstocks. The results of this research include: ▪ a recommendation for a categorisation system for CSP hybrid plants based on the degree of interconnection of the plant components ▪ the availability of combined resources to generate up to 33.5 TWh per year and abate 27 million tonnes CO₂ annually ▪ an analysis of the most suitable CSP technologies for hybridisation ▪ a technology comparison showing CSP cost reductions through hybridisation of up to 40% ▪ the identification of cost differences of up to 31% between different hybrid concepts ▪ an analysis showing that the current economic and policy settings are the most significant implementation barriers ▪ two case studies with different biomass and waste feedstocks requiring power purchase agreements of AU$ 100-155/MWh. Based on the various benefits of concentrating solar power hybrid plants, this research analyses the potential role of this technological pairing in Australia’s transition to a low carbon energy future. The research concludes that concentrating solar power hybrid plants, not only hybridised with biomass and waste feedstocks, can immediately enable a lower cost deployment of concentrating solar power facilities in Australia. The technology, deployment and operation of the first hybrid installations would provide market participants with valuable lessons and would have the potential to reconfigure the electricity market towards more sustainable generation. This could help promote the development of future low-cost concentrating solar power plants in Australia

Hybrid solar-biomass combined Brayton/organic Rankine-cycle plants integrated with thermal storage: Techno-economic feasibility in select Mediterranean areas

This paper presents a thermodynamic analysis and techno-economic assessment of a novel hybrid solar-biomass power-generation system configuration composed of an externally fired gas-turbine (EFGT) fuelled by biomass (wood chips) and a bottoming organic Rankine cycle (ORC) plant. The main novelty is related to the heat recovery from the exhaust gases of the EFGT via thermal energy storage (TES), and integration of heat from a parabolic-trough collectors (PTCs) field with molten salts as a heat-transfer fluid (HTF). The presence of a TES between the topping and bottoming cycles facilitates the flexible operation of the system, allows the system to compensate for solar energy input fluctuations, and increases capacity factor and dispatchability. A TES with two molten salt tanks (one cold at 200 °C and one hot at 370 °C) is chosen. The selected bottoming ORC is a superheated recuperative cycle suitable for heat conversion in the operating temperature range of the TES. The whole system is modelled by means of a Python-based software code, and three locations in the Mediterranean area are assumed in order to perform energy-yield analyses: Marseille in France, Priolo Gargallo in Italy and Rabat in Morocco. In each case, the thermal storage that minimizes the levelized cost of energy (LCE) is selected on the basis of the estimated solar radiation and CSP size. The results of the thermodynamic simulations, capital and operational costs assessments and subsidies (feed-in tariffs for biomass and solar electricity available in the Italian framework), allow estimating the global energy conversion efficiency and the investment profitability in the three locations. Sensitivity analyses of the biomass costs, size of PTCs, feed-in tariff and share of cogenerated heat delivered to the load are also performed. The results show that the high investment costs of the CSP section in the proposed size range and hybridization configuration allow investment profitability only in the presence of a dedicated subsidy framework such as the one available in the Italian energy market. In particular, the LCE of the proposed system is around 140 Eur/MWh (with the option to discharge the cogenerated heat) and the IRR is around 15%, based on the Italian electricity subsidy tariffs. The recovery of otherwise discharged heat to match thermal energy demand can significantly increase the investment profitability and compensate the high investment costs of the proposed technology

Low-carbon energy: a roadmap

Technologies available today, and those expected to become competitive over the next decade, will permit a rapid decarbonization of the global energy economy. New renewable energy technologies, combined with a broad suite of energy-efficiency advances, will allow global energy needs to be met without fossil fuels and by adding only minimally to the cost of energy services The world is now in the early stages of an energy revolution that over the next few decades could be as momentous as the emergence of oiland electricity-based economies a century ago. Double-digit market growth, annual capital flows of more than $100 billion, sharp declines in technology costs, and rapid progress in the sophistication and effectiveness of government policies all herald a promising new energy era. Advanced automotive, electronics, and buildings systems will allow a substantial reduction in carbon dioxide (CO2) emissions, at negative costs once the savings in energy bills is accounted for. The savings from these measures can effectively pay for a significant portion of the additional cost of advanced renewable energy technologies to replace fossil fuels, including wind, solar, geothermal, and bioenergy. Resource estimates indicate that renewable energy is more abundant than all of the fossil fuels combined, and that well before mid-century it will be possible to run most national electricity systems with minimal fossil fuels and only 10 percent of the carbon emissions they produce today. The development of smart electricity grids, the integration of plug-in electric vehicles, and the addition of limited storage capacity will allow power to be provided without the baseload plants that are the foundation of today's electricity systems. Recent climate simulations conclude that CO2 emissions will need to peak within the next decade and decline by at least 50 to 80 percent by 2050. This challenge will be greatly complicated by the fact that China, India, and other developing countries are now rapidly developing modern energy systems. The only chance of slowing the buildup of CO2 concentrations soon enough to avoid catastrophic climate change that could take centuries to reverse is to transform the energy economies of industrial and developing countries almost simultaneously. This would have seemed nearly impossible a few years ago, but since then, the energy policies and markets of China and India have begun to change rapidly -- more rapidly than those in many industrial countries. Renewable and efficiency technologies will allow developing countries to increase their reliance on indigenous resources and reduce their dependence on expensive and unstable imported fuelsAround the world, new energy systems could become a huge engine of industrial development and job creation, opening vast new economic opportunities. Developing countries have the potential to "leapfrog" the carbon-intensive development path of the 20th century and go straight to the advanced energy systems that are possible today. Improved technology and high energy prices have created an extraordinarily favorable market for new energy systems over the past few years. But reaching a true economic tipping point will require innovative public policies and strong political leadership