34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Lyapunov based optimal control of a class of nonlinear systems

Optimal control of nonlinear systems is in fact difficult since it requires the solution to the Hamilton-Jacobi-Bellman (HJB) equation which has no closed-form solution. In contrast to offline and/or online iterative schemes for optimal control, this dissertation in the form of five papers focuses on the design of iteration free, online optimal adaptive controllers for nonlinear discrete and continuous-time systems whose dynamics are completely or partially unknown even when the states not measurable. Thus, in Paper I, motivated by homogeneous charge compression ignition (HCCI) engine dynamics, a neural network-based infinite horizon robust optimal controller is introduced for uncertain nonaffine nonlinear discrete-time systems. First, the nonaffine system is transformed into an affine-like representation while the resulting higher order terms are mitigated by using a robust term. The optimal adaptive controller for the affinelike system solves HJB equation and identifies the system dynamics provided a target set point is given. Since it is difficult to define the set point a priori in Paper II, an extremum seeking control loop is designed while maximizing an uncertain output function. On the other hand, Paper III focuses on the infinite horizon online optimal tracking control of known nonlinear continuous-time systems in strict feedback form by using state and output feedback by relaxing the initial admissible controller requirement. Paper IV applies the optimal controller from Paper III to an underactuated helicopter attitude and position tracking problem. In Paper V, the optimal control of nonlinear continuous-time systems in strict feedback form from Paper III is revisited by using state and output feedback when the internal dynamics are unknown. Closed-loop stability is demonstrated for all the controller designs developed in this dissertation by using Lyapunov analysis --Abstract, page iv

Structure-Preserving Model Reduction of Physical Network Systems

This paper considers physical network systems where the energy storage is naturally associated to the nodes of the graph, while the edges of the graph correspond to static couplings. The first sections deal with the linear case, covering examples such as mass-damper and hydraulic systems, which have a structure that is similar to symmetric consensus dynamics. The last section is concerned with a specific class of nonlinear physical network systems; namely detailed-balanced chemical reaction networks governed by mass action kinetics. In both cases, linear and nonlinear, the structure of the dynamics is similar, and is based on a weighted Laplacian matrix, together with an energy function capturing the energy storage at the nodes. We discuss two methods for structure-preserving model reduction. The first one is clustering; aggregating the nodes of the underlying graph to obtain a reduced graph. The second approach is based on neglecting the energy storage at some of the nodes, and subsequently eliminating those nodes (called Kron reduction).</p

Estimation and control of non-linear and hybrid systems with applications to air-to-air guidance

Issued as Progress report, and Final report, Project no. E-21-67

Output feedback sliding mode control for time delay systems

This Thesis considers Sliding Mode Control (SMC) for linear systems subjected to uncertainties and delays using output feedback. Delay is a natural phenomenon in many practical systems, the effect of delay can be the potential cause -of performance deterioration or even instability. To achieve better control performance, SMC with output feedback is considered for its inherent robustness feature and practicality for implementation. In highlighting the main results, firstly a novel output feedback SMC design is presented which formulates the problem into Linear Matrix Inequalities (LMIs). The efficiency of the design is compared with the the existing literature in pole assignment. eigenstructure assignment and other LMI methods, which either require more constraints on system structures or are computationally less tractable. For systems with timevarying Slate delay, the method is extended to incorporate the delay effect in the controUer synthesis. Both sliding surface and controller design are formulated as LMI problems. For systems with input/output delays and disturbances. the robustness of SMC is degraded with arbitrarily small delay appearing in the high frequency switching component of the controller. To solve the problem singular perturbation method is used to achieve bounded performance which is proportional to the magnitudes of delay, disturbance and switching gain. The applied research has produced two practical implementation studies. Firstly it relates to the pointing control of an autonomous vehicle subjected to external disturbances and friction resulting from the motion of the vehicle crossing rough terrain. The second implementation concerns the attitude control of a flexible spacecraft with respect to roil, pitch and yaw attitude angles

Study of numeric Saturation Effects in Linear Digital Compensators

Saturation arithmetic is often used in finite precision digital compensators to circumvent instability due to radix overflow. The saturation limits in the digital structure lead to nonlinear behavior during large state transients. It is shown that if all recursive loops in a compensator are interrupted by at least one saturation limit, then there exists a bounded external scaling rule which assures against overflow at all nodes in the structure. Design methods are proposed based on the generalized second method of Lyapunov, which take the internal saturation limits into account to implement a robust dual-mode suboptimal control for bounded input plants. The saturating digital compensator provides linear regulation for small disturbances, and near-time-optimal control for large disturbances or changes in the operating point. Computer aided design tools are developed to facilitate the analysis and design of this class of digital compensators

Développement d'outils de calcul et de logiciels pour la réalisation et l'implantation de stratégies de commande non linéaires échantillonnées

Cette thèse concerne la conception de commandes échantillonnées pour les systèmes non-linéaires en temps continu. Les systèmes échantillonnés sont des éléments inhérents aux systèmes contrôlés par ordinateur, les systèmes hybrides ou les systèmes embarqués. La conception et le calcul des contrôleurs numériques appropriés sont des taches difficiles car ils contiennent des composants à la fois continu et en temps discret. Ce travail s'inscrit dans une activité de recherche menée par S. Monaco et D. Normand-Cyrot dans le domaine des systèmes échantillonnés non-linéaires. L'idée de base est de concevoir des contrôleurs digitaux qui permettent de récupérer certaines propriétés en temps continu qui sont généralement dégradées par l'échantillonnage. Tel est le cas de l'émulation lorsque les contrôleurs en temps continu sont mis en ouvre en utilisant des bloqueurs d'ordre zéro. Cette thèse apporte des contributions dans trois directions complémentaires. La première concerne les développements théoriques: une nouvelle conception de type backstepping digital" est proposée pour les systèmes en forme strict-feedback". Cette méthode est comparée à d'autres stratégies proposées dans la littérature. La deuxième contribution est le développement d'un logiciel pour la synthèse des contrôleurs et d'une boîte à outils" pour simuler (en Matlab) les systèmes échantillonnés non-linéaires et leurs contrôleurs. Cette boîte à outils inclut plusieurs algorithmes pour la synthèse de contrôleurs échantillonnés tels que: commande de type multi-échelle, reproduction entrée-sortie/Lyapunov, backstepping digital, etc. La troisième contribution concerne plusieurs études de cas menées pour mettre en évidence les performances des contrôleurs échantillonnés, calculés avec l'aide du logiciel. Des résultats expérimentaux et des simulations sont décrits pour divers exemples réels dans les domaines électriques et mécaniques.This thesis is concerned with the sampled-data control of non-linear continuous-time systems. Sampled-data systems are present in all computer controlled, hybrid or embedded systems. The design and computation of suitable digital controllers represent unavoidable tasks since both continuous and discrete-time components interact. The basic framework of this work takes part of a wide research activity performed by S. Monaco and D. Normand-Cyrot regarding non-linear sampled-data systems. The underlying idea is to design digital controllers that recover certain continuous-time properties that are usually degraded through sampling as it is the case when continuous-time controllers are implemented by means of zero-order holder devices (emulated control). This thesis brings contributions into three different directions. The first one regards theoretical developments: a new digital backstepping-like strategy design for strict-feedback systems is proposed. This method is compared with other strategies proposed in the literature. The second contribution is the development of a control designer and of a simulation toolbox (in Matlab) for non-linear sampled-data systems. This toolbox includes different digital design strategies such as: multi-rate control, input-output/Lyapunov matching, digital backstepping design, etc. The third contribution concerns several case studies conducted to highlight the performances of the sampled-data controller designs, computed by the means of the software toolbox. Experimental and simulation results are described for various real examples especially in the area of electrical and mechanical processes.PARIS11-SCD-Bib. électronique (914719901) / SudocSudocFranceF