A soft error mitigation scheme to increase the resilience of register file

Abstract Register files are essential and integral part of any microprocessor architecture. Soft errors in the register file can quickly spread to various parts of the system and result in silent data corruption. Traditional redundancy based schemes to protect the register file are prohibitive because register file is often in the timing critical path of the processor. Since it is one of the hottest blocks on the chip, adding any extra circuitry to it is not desirable. For embedded systems under severe cost constraints, where power, performance, area and reliability cannot be simply compromised, we propose a soft error reduction technique for register files. This thesis introduces a soft error mitigation scheme, called Self-Immunity to increase the resilience of the register file from soft errors, by using unused bits of the register file. It is desirable for processors that demand high register file integrity under stringent constraints. This thesis explains the implementation of our proposed technique to protect the register file from soft errors. And show the best overall results compared to state-of-the-art in register file vulnerability reduction with minimum impact on the area and power

Lock-V: a heterogeneous fault tolerance architecture based on Arm and RISC-V

This article presents Lock-V, a heterogeneous fault tolerance architecture that explores a dual-core lockstep (DCLS) technique to mitigate single event upset (SEU) and common-mode failure (CMF) problems. The Lock-V was deployed in two versions, Lock-VA and Lock-VM by applying design diversity in two processor architectures at the instruction set architecture (ISA)-level. Lock-VA features an Arm Cortex-A9 with a RISC-V RV64GC, while Lock-VM includes an Arm Cortex-M3 along with a RISC-V RV32IMA processor. The solution explores fieldprogrammable gate array (FPGA) technology to deploy softcore versions of the RISC-V processors, and dedicated accelerators for performing error detection and triggering the software rollback system used for error recovery. To test Lock-V in both versions, a fault-injection mechanism was implemented to cause bit-flips in the processor registers, a common problem usually present in heavy radiation environments.This work has been supported by FCT - Fundação para a Ciência e a Tecnologia within the R&D Units Project Scope: UIDB/00319/2020

Techniques for Aging, Soft Errors and Temperature to Increase the Reliability of Embedded On-Chip Systems

This thesis investigates the challenge of providing an abstracted, yet sufficiently accurate reliability estimation for embedded on-chip systems. In addition, it also proposes new techniques to increase the reliability of register files within processors against aging effects and soft errors. It also introduces a novel thermal measurement setup that perspicuously captures the infrared images of modern multi-core processors

Soft-error resilient on-chip memory structures

Soft errors induced by energetic particle strikes in on-chip memory structures, such as L1 data/instruction caches and register files, have become an increasing challenge in designing new generation reliable microprocessors. Due to their transient/random nature, soft errors cannot be captured by traditional verification and testing process due to the irrelevancy to the correctness of the logic. This dissertation is thus focusing on the reliability characterization and cost-effective reliable design of on-chip memories against soft errors. Due to various performance, area/size, and energy constraints in various target systems, many existing unoptimized protection schemes on cache memories may eventually prove significantly inadequate and ineffective. This work develops new lifetime models for data and tag arrays residing in both the data and instruction caches. These models facilitate the characterization of cache vulnerability of the stored items at various lifetime phases. The design methodology is further exemplified by the proposed reliability schemes targeting at specific vulnerable phases. Benchmarking is carried out to showcase the effectiveness of these approaches. The tag array demands high reliability against soft errors while the data array is fully protected in on-chip caches, because of its crucial importance to the correctness of cache accesses. Exploiting the address locality of memory accesses, this work proposes a Tag Replication Buffer (TRB) to protect information integrity of the tag array in the data cache with low performance, energy and area overheads. To provide a comprehensive evaluation of the tag array reliability, this work also proposes a refined evaluation metric, detected-without-replica-TVF (DOR-TVF), which combines the TVF and access-with-replica (AWR) analysis. Based on the DOR-TVF analysis, a TRB scheme with early write-back (TRB-EWB) is proposed, which achieves a zero DOR-TVF at a negligible performance overhead. Recent research, as well as the proposed optimization schemes in this cache vulnerability study, have focused on the design of cost-effective reliable data caches in terms of performance, energy, and area overheads based on the assumption of fixed error rates. However, for systems in operating environments that vary with time or location, those schemes will be either insufficient or over-designed for the changing error rates. This work explores the design of a self-adaptive reliable data cache that dynamically adapts its employed reliability schemes to the changing operating environments in order to maintain a target reliability. The experimental evaluation shows that the self-adaptive data cache achieves similar reliability to a cache protected by the most reliable scheme, while simultaneously minimizing the performance and power overheads. Besides the data/instruction caches, protecting the register file and its data buses is crucial to reliable computing in high-performance microprocessors. Since the register file is in the critical path of the processor pipeline, any reliable design that increases either the pressure on the register file or the register file access latency is not desirable. This work proposes to exploit narrow-width register values, which represent the majority of generated values, for making the duplicates within the same register data item. A detailed architectural vulnerability factor (AVF) analysis shows that this in-register duplication (IRD) scheme significantly reduces the AVF in the register file compared to the conventional design. The experimental evaluation also shows that IRD provides superior read-with-duplicate (RWD) and error detection/recovery rates under heavy error injection as compared to previous reliability schemes, while only incurring a small power overhead. By integrating the proposed reliable designs in data/instruction caches and register files, the vulnerability of the entire microprocessor is dramatically reduced. The new lifetime model, the self-adaptive design and the narrow-width value duplication scheme proposed in this work can also provide guidance to architects toward highly efficient reliable system design

Cross layer reliability estimation for digital systems

Forthcoming manufacturing technologies hold the promise to increase multifuctional computing systems performance and functionality thanks to a remarkable growth of the device integration density. Despite the benefits introduced by this technology improvements, reliability is becoming a key challenge for the semiconductor industry. With transistor size reaching the atomic dimensions, vulnerability to unavoidable fluctuations in the manufacturing process and environmental stress rise dramatically. Failing to meet a reliability requirement may add excessive re-design cost to recover and may have severe consequences on the success of a product. %Worst-case design with large margins to guarantee reliable operation has been employed for long time. However, it is reaching a limit that makes it economically unsustainable due to its performance, area, and power cost. One of the open challenges for future technologies is building ``dependable'' systems on top of unreliable components, which will degrade and even fail during normal lifetime of the chip. Conventional design techniques are highly inefficient. They expend significant amount of energy to tolerate the device unpredictability by adding safety margins to a circuit's operating voltage, clock frequency or charge stored per bit. Unfortunately, the additional cost introduced to compensate unreliability are rapidly becoming unacceptable in today's environment where power consumption is often the limiting factor for integrated circuit performance, and energy efficiency is a top concern. Attention should be payed to tailor techniques to improve the reliability of a system on the basis of its requirements, ending up with cost-effective solutions favoring the success of the product on the market. Cross-layer reliability is one of the most promising approaches to achieve this goal. Cross-layer reliability techniques take into account the interactions between the layers composing a complex system (i.e., technology, hardware and software layers) to implement efficient cross-layer fault mitigation mechanisms. Fault tolerance mechanism are carefully implemented at different layers starting from the technology up to the software layer to carefully optimize the system by exploiting the inner capability of each layer to mask lower level faults. For this purpose, cross-layer reliability design techniques need to be complemented with cross-layer reliability evaluation tools, able to precisely assess the reliability level of a selected design early in the design cycle. Accurate and early reliability estimates would enable the exploration of the system design space and the optimization of multiple constraints such as performance, power consumption, cost and reliability. This Ph.D. thesis is devoted to the development of new methodologies and tools to evaluate and optimize the reliability of complex digital systems during the early design stages. More specifically, techniques addressing hardware accelerators (i.e., FPGAs and GPUs), microprocessors and full systems are discussed. All developed methodologies are presented in conjunction with their application to real-world use cases belonging to different computational domains

Improving the Robustness of Redundant Execution with Register File Randomization

[EN] Staggered Redundant execution (SRE) is a fault-tolerance mechanism that has been widely deployed in the context of safety-critical applications. SRE not only protects the system in the presence of faults but also helps relaxing safety requirements of individual elements. However, in this paper, we show that SRE does not effectively protect the system against a wide range of faults and thus, new mechanisms to increase the diversity of homogeneous cores are needed. In this paper, we propose Register File Randomization (RFR), a low-cost diversity mechanism that significantly increases the robustness of homogeneous multicores in front of common-cause faults (CCFs) and register file wearout. Our results show that RFR completely removes the failure rate for register file CCFs for certain workloads and reduces by a factor of 5X the impact of stress related register file aging for the workloads analysed. Our implementation requires less than 50 RTL lines of code and the area (FPGA logic) overhead of RFR is less than 0.2% of a 64-bit RISC-V core FPGA implementation.This work has received funding from the ECSEL Joint Undertaking (JU) under grant agreement No 877056 and the Agencia Estatal de Investigacion from Spain under grant agreement no. PCI2020-112092, and from the the European Unions Horizon 2020 research and innovation programme under grant agreement no. 871467.Tuzov, I.; Andreu, P.; Medina, L.; Picornell-Sanjuan, T.; Robles Martínez, A.; López Rodríguez, PJ.; Flich Cardo, J.... (2021). Improving the Robustness of Redundant Execution with Register File Randomization. IEEE. 1-9. https://doi.org/10.1109/ICCAD51958.2021.96434661

Study and application of direct RF power injection methodology and mitigation of electromagnetic interference in ADCs

There are many publications available in literature regarding the DPI (Direct Power Injection) technique for electronic systems, but few works specifically addressed for mixed-signal converters, which are components existent in almost all electronic devices. IEC 62132-4(International Electrotechnical Commission, 2006) and 62132-1(International Electrotechnical Commission, 2006) standards describe a method for measuring immunity of integrated circuits (IC) in the presence of conducted RF disturbances. This method ensures a high degree of repeatability and correlation of immunity measurements. Knowledge of the electromagnetic immunity of an IC allows the designer to decide if the system will need external protection, and how much effort should be directed to this solution. In this context, the purpose of this work is the study and application of the DPI methodology for injection of EMI in a mixed-signal programmable device, evaluating mitigation possibilities, with special focus on the analog-to-digital converters (ADCs). The main objective is to evaluate the impact of electromagnetic interference (EMI) on different converters (two Successive Approximation Register ADCs, operating with distinct sampling rate and a Sigma-Delta ADC) of the Cypress Semiconductor Programmable SoC (System-on-Chip), PSoC 5LP. Additionally a previously proposed fault tolerance methodology, based on triplication with hardware and time diversity is tested. Results show distinct behaviors of each converter to conducted EMI. Finally, the tested tolerance technique showed to be suitable to reduce error rate of such data acquisition system operating under EMI disturbance.Existem muitas publicações disponíveis na literatura sobre a técnica de DPI (Direct Power Injection ou injeção direta de energia) para sistemas eletrônicos, mas poucos trabalhos direcionados para conversores de sinais mistos, que são componentes existentes em quase todos os dispositivos eletrônicos. As normas IEC 62132-4 (IEC, 2006) e 62132-1 (IEC, 2006) descrevem um método para medir a imunidade de circuitos integrados (CI) na presença de distúrbios de RF conduzidos. Este método garante um alto grau de repetibilidade e correlação das medições da imunidade. O conhecimento da imunidade eletromagnética de um CI permite que o projetista decida se o sistema precisará de proteção externa e quanto esforço deve ser direcionado para esta solução. Nesse contexto, o objetivo deste trabalho é o estudo e aplicação da metodologia DPI para injeção de interferência eletromagnética em um dispositivo programável de sinal misto, avaliando as possibilidades de mitigação, com foco especial em conversores analógico-digitais (ADCs). O principal objetivo é avaliar o impacto da interferência eletromagnética em diferentes conversores (dois ADCs baseados em aproximação sucessiva, operando com taxa de amostragem distintas e um ADC do tipo Sigma-Delta) do SoC(System-on-Chip) programável da Cypress Semiconductor, PSoC 5LP. Além disso, é testada uma metodologia de tolerância a falhas proposta anteriormente, baseada em triplicação com diversidade de hardware e temporal. Os resultados mostram comportamentos distintos de cada conversor para a interferência eletromagnética conduzida. Finalmente, a técnica de tolerância testada mostrou-se adequada para reduzir a taxa de erros desse sistema de aquisição de dados operando sob perturbação eletromagnética

Fault Tolerant Electronic System Design

Due to technology scaling, which means reduced transistor size, higher density, lower voltage and more aggressive clock frequency, VLSI devices may become more sensitive against soft errors. Especially for those devices used in safety- and mission-critical applications, dependability and reliability are becoming increasingly important constraints during the development of system on/around them. Other phenomena (e.g., aging and wear-out effects) also have negative impacts on reliability of modern circuits. Recent researches show that even at sea level, radiation particles can still induce soft errors in electronic systems. On one hand, processor-based system are commonly used in a wide variety of applications, including safety-critical and high availability missions, e.g., in the automotive, biomedical and aerospace domains. In these fields, an error may produce catastrophic consequences. Thus, dependability is a primary target that must be achieved taking into account tight constraints in terms of cost, performance, power and time to market. With standards and regulations (e.g., ISO-26262, DO-254, IEC-61508) clearly specify the targets to be achieved and the methods to prove their achievement, techniques working at system level are particularly attracting. On the other hand, Field Programmable Gate Array (FPGA) devices are becoming more and more attractive, also in safety- and mission-critical applications due to the high performance, low power consumption and the flexibility for reconfiguration they provide. Two types of FPGAs are commonly used, based on their configuration memory cell technology, i.e., SRAM-based and Flash-based FPGA. For SRAM-based FPGAs, the SRAM cells of the configuration memory highly susceptible to radiation induced effects which can leads to system failure; and for Flash-based FPGAs, even though their non-volatile configuration memory cells are almost immune to Single Event Upsets induced by energetic particles, the floating gate switches and the logic cells in the configuration tiles can still suffer from Single Event Effects when hit by an highly charged particle. So analysis and mitigation techniques for Single Event Effects on FPGAs are becoming increasingly important in the design flow especially when reliability is one of the main requirements

Soft Error Resistant Design of the AES Cipher Using SRAM-based FPGA

This thesis presents a new architecture for the reliable implementation of the symmetric-key algorithm Advanced Encryption Standard (AES) in Field Programmable Gate Arrays (FPGAs). Since FPGAs are prone to soft errors caused by radiation, and AES is highly sensitive to errors, reliable architectures are of significant concern. Energetic particles hitting a device can flip bits in FPGA SRAM cells controlling all aspects of the implementation. Unlike previous research, heterogeneous error detection techniques based on properties of the circuit and functionality are used to provide adequate reliability at the lowest possible cost. The use of dual ported block memory for SubBytes, duplication for the control circuitry, and a new enhanced parity technique for MixColumns is proposed. Previous parity techniques cover single errors in datapath registers, however, soft errors can occur in the control circuitry as well as in SRAM cells forming the combinational logic and routing. In this research, propagation of single errors is investigated in the routed netlist. Weaknesses of the previous parity techniques are identified. Architectural redesign at the register-transfer level is introduced to resolve undetected single errors in both the routing and the combinational logic. Reliability of the AES implementation is not only a critical issue in large scale FPGA-based systems but also at both higher altitudes and in space applications where there are a larger number of energetic particles. Thus, this research is important for providing efficient soft error resistant design in many current and future secure applications