Distributed Fiber Ultrasonic Sensor and Pattern Recognition Analytics

Ultrasound interrogation and structural health monitoring technologies have found a wide array of applications in the health care, aerospace, automobile, and energy sectors. To achieve high spatial resolution, large array electrical transducers have been used in these applications to harness sufficient data for both monitoring and diagnoses. Electronic-based sensors have been the standard technology for ultrasonic detection, which are often expensive and cumbersome for use in large scale deployments. Fiber optical sensors have advantageous characteristics of smaller cross-sectional area, humidity-resistance, immunity to electromagnetic interference, as well as compatibility with telemetry and telecommunications applications, which make them attractive alternatives for use as ultrasonic sensors. A unique trait of fiber sensors is its ability to perform distributed acoustic measurements to achieve high spatial resolution detection using a single fiber. Using ultrafast laser direct-writing techniques, nano-reflectors can be induced inside fiber cores to drastically improve the signal-to-noise ratio of distributed fiber sensors. This dissertation explores the applications of laser-fabricated nano-reflectors in optical fiber cores for both multi-point intrinsic Fabry–Perot (FP) interferometer sensors and a distributed phase-sensitive optical time-domain reflectometry (φ-OTDR) to be used in ultrasound detection. Multi-point intrinsic FP interferometer was based on swept-frequency interferometry with optoelectronic phase-locked loop that interrogated cascaded FP cavities to obtain ultrasound patterns. The ultrasound was demodulated through reassigned short time Fourier transform incorporating with maximum-energy ridges tracking. With tens of centimeters cavity length, this approach achieved 20kHz ultrasound detection that was finesse-insensitive, noise-free, high-sensitivity and multiplex-scalability. The use of φ-OTDR with enhanced Rayleigh backscattering compensated the deficiencies of low inherent signal-to-noise ratio (SNR). The dynamic strain between two adjacent nano-reflectors was extracted by using 3×3 coupler demodulation within Michelson interferometer. With an improvement of over 35 dB SNR, this was adequate for the recognition of the subtle differences in signals, such as footstep of human locomotion and abnormal acoustic echoes from pipeline corrosion. With the help of artificial intelligence in pattern recognition, high accuracy of events’ identification can be achieved in perimeter security and structural health monitoring, with further potential that can be harnessed using unsurprised learning

Uncertainty Management of Intelligent Feature Selection in Wireless Sensor Networks

Wireless sensor networks (WSN) are envisioned to revolutionize the paradigm of monitoring complex real-world systems at a very high resolution. However, the deployment of a large number of unattended sensor nodes in hostile environments, frequent changes of environment dynamics, and severe resource constraints pose uncertainties and limit the potential use of WSN in complex real-world applications. Although uncertainty management in Artificial Intelligence (AI) is well developed and well investigated, its implications in wireless sensor environments are inadequately addressed. This dissertation addresses uncertainty management issues of spatio-temporal patterns generated from sensor data. It provides a framework for characterizing spatio-temporal pattern in WSN. Using rough set theory and temporal reasoning a novel formalism has been developed to characterize and quantify the uncertainties in predicting spatio-temporal patterns from sensor data. This research also uncovers the trade-off among the uncertainty measures, which can be used to develop a multi-objective optimization model for real-time decision making in sensor data aggregation and samplin

Advances and Applications of Dezert-Smarandache Theory (DSmT) for Information Fusion (Collected Works), Vol. 4

The fourth volume on Advances and Applications of Dezert-Smarandache Theory (DSmT) for information fusion collects theoretical and applied contributions of researchers working in different fields of applications and in mathematics. The contributions (see List of Articles published in this book, at the end of the volume) have been published or presented after disseminating the third volume (2009, http://fs.unm.edu/DSmT-book3.pdf) in international conferences, seminars, workshops and journals. First Part of this book presents the theoretical advancement of DSmT, dealing with Belief functions, conditioning and deconditioning, Analytic Hierarchy Process, Decision Making, Multi-Criteria, evidence theory, combination rule, evidence distance, conflicting belief, sources of evidences with different importance and reliabilities, importance of sources, pignistic probability transformation, Qualitative reasoning under uncertainty, Imprecise belief structures, 2-Tuple linguistic label, Electre Tri Method, hierarchical proportional redistribution, basic belief assignment, subjective probability measure, Smarandache codification, neutrosophic logic, Evidence theory, outranking methods, Dempster-Shafer Theory, Bayes fusion rule, frequentist probability, mean square error, controlling factor, optimal assignment solution, data association, Transferable Belief Model, and others. More applications of DSmT have emerged in the past years since the apparition of the third book of DSmT 2009. Subsequently, the second part of this volume is about applications of DSmT in correlation with Electronic Support Measures, belief function, sensor networks, Ground Moving Target and Multiple target tracking, Vehicle-Born Improvised Explosive Device, Belief Interacting Multiple Model filter, seismic and acoustic sensor, Support Vector Machines, Alarm classification, ability of human visual system, Uncertainty Representation and Reasoning Evaluation Framework, Threat Assessment, Handwritten Signature Verification, Automatic Aircraft Recognition, Dynamic Data-Driven Application System, adjustment of secure communication trust analysis, and so on. Finally, the third part presents a List of References related with DSmT published or presented along the years since its inception in 2004, chronologically ordered

Artificial intelligence methods for security and cyber security systems

This research is in threat analysis and countermeasures employing Artificial Intelligence (AI) methods within the civilian domain, where safety and mission-critical aspects are essential. AI has challenges of repeatable determinism and decision explanation. This research proposed methods for dense and convolutional networks that provided repeatable determinism. In dense networks, the proposed alternative method had an equal performance with more structured learnt weights. The proposed method also had earlier learning and higher accuracy in the Convolutional networks. When demonstrated in colour image classification, the accuracy improved in the first epoch to 67%, from 29% in the existing scheme. Examined in transferred learning with the Fast Sign Gradient Method (FSGM) as an analytical method to control distortion of dissimilarity, a finding was that the proposed method had more significant retention of the learnt model, with 31% accuracy instead of 9%. The research also proposed a threat analysis method with set-mappings and first principle analytical steps applied to a Symbolic AI method using an algebraic expert system with virtualized neurons. The neural expert system method demonstrated the infilling of parameters by calculating beamwidths with variations in the uncertainty of the antenna type. When combined with a proposed formula extraction method, it provides the potential for machine learning of new rules as a Neuro-Symbolic AI method. The proposed method uses extra weights allocated to neuron input value ranges as activation strengths. The method simplifies the learnt representation reducing model depth, thus with less significant dropout potential. Finally, an image classification method for emitter identification is proposed with a synthetic dataset generation method and shows the accurate identification between fourteen radar emission modes with high ambiguity between them (and achieved 99.8% accuracy). That method would be a mechanism to recognize non-threat civil radars aimed at threat alert when deviations from those civilian emitters are detected

Biologically inspired learning system

Learning Systems used on robots require either a-priori knowledge in the form of models, rules of thumb or databases or require that robot to physically execute multitudes of trial solutions. The first requirement limits the robot’s ability to operate in unstructured changing environments, and the second limits the robot’s service life and resources. In this research a generalized approach to learning was developed through a series of algorithms that can be used for construction of behaviors that are able to cope with unstructured environments through adaptation of both internal parameters and system structure as a result of a goal based supervisory mechanism. Four main learning algorithms have been developed, along with a goal directed random exploration routine. These algorithms all use the concept of learning from a recent memory in order to save the robot/agent from having to exhaustively execute all trial solutions. The first algorithm is a reactive online learning algorithm that uses a supervised learning to find the sensor/action combinations that promote realization of a preprogrammed goal. It produces a feed forward neural network controller that is used to control the robot. The second algorithm is similar to first in that it uses a supervised learning strategy, but it produces a neural network that considers past values, thus providing a non-reactive solution. The third algorithm is a departure from the first two in that uses a non-supervised learning technique to learn the best actions for each situation the robot encounters. The last algorithm builds a graph of the situations encountered by agent/robot in order to learn to associate the best actions with sensor inputs. It uses an unsupervised learning approach based on shortest paths to a goal situation in the graph in order to generate a non-reactive feed forward neural network. Test results were good, the first and third algorithms were tested in a formation maneuvering task in both simulation and onboard mobile robots, while the second and fourth were tested simulation