Security analysis of wireless mesh backhauls for mobile networks

Radio links are used to provide backhaul connectivity for base stations of mobile networks, in cases in which cable-based alternatives are not available and cannot be deployed in an economic or timely manner. While such wireless backhauls have been predominantly used in redundant tree and ring topologies in the past, mobile network operators have become increasingly interested in meshed topologies for carrier-grade wireless backhauls. However, wireless mesh backhauls are potentially more susceptible to security vulnerabilities, given that radio links are more exposed to tampering and given their higher system complexity. This article extends prior security threat analyses of 3rd generation mobile network architectures for the case of wireless mesh backhauls. It presents a description of the security model for the considered architecture and provides a list of the basic assumptions, security objectives, assets to be protected and actors of the analysis. On this foundation, potential security threats are analyzed and discussed and then assessed for their corresponding risk. The result of this risk assessment is then used to define a set of security requirements. Finally, we give some recommendations for wireless mesh backhaul designs and implementations following these requirements.European Community's Seventh Framework ProgramPublicad

Fifth-generation small cell backhaul capacity enhancement and large-scale parameter effect

The proliferation of handheld devices has continued to push the demand for higher data rates. Network providers will use small cells as an overlay to macrocell in fifth-generation (5G) for network capacity enhancement. The current cellular wireless backhauls suffer from the problem of insufficient backhaul capacity to cater to the new small cell deployment scenarios. Using the 3D digital map of Lagos Island in the Wireless InSite, small cells are deployed on a street canyon and in high-rise scenarios to simulate the backhaul links to the small cells at 28 GHz center frequency and 100 MHz bandwidth. Using a user-defined signal to interference plus noise ratio-throughput (SINR-throughput) table based on an adaptive modulation and coding scheme (MCS), the throughput values were generated based on the equation specified by 3GPP TS 38.306 V15.2.0 0, which estimates the peak data rate based on the modulation order and coding rate for each data stream calculated by the propagation model. Finding shows achieved channel capacity is comparable with gigabit passive optical networks (GPON) used in fiber to the ‘X’ (FTTX) for backhauling small cells. The effect of channel parameters such as root mean squared (RMS) delay spread and RMS angular spread on channel capacity are also investigated and explained

Self-organized backpressure routing for the wireless mesh backhaul of small cells

The ever increasing demand for wireless data services has given a starring role to dense small cell (SC) deployments for mobile networks, as increasing frequency re-use by reducing cell size has historically been the most effective and simple way to increase capacity. Such densification entails challenges at the Transport Network Layer (TNL), which carries packets throughout the network, since hard-wired deployments of small cells prove to be cost-unfeasible and inflexible in some scenarios. The goal of this thesis is, precisely, to provide cost-effective and dynamic solutions for the TNL that drastically improve the performance of dense and semi-planned SC deployments. One approach to decrease costs and augment the dynamicity at the TNL is the creation of a wireless mesh backhaul amongst SCs to carry control and data plane traffic towards/from the core network. Unfortunately, these lowcost SC deployments preclude the use of current TNL routing approaches such as Multiprotocol Label Switching Traffic Profile (MPLS-TP), which was originally designed for hard-wired SC deployments. In particular, one of the main problems is that these schemes are unable to provide an even network resource consumption, which in wireless environments can lead to a substantial degradation of key network performance metrics for Mobile Network Operators. The equivalent of distributing load across resources in SC deployments is making better use of available paths, and so exploiting the capacity offered by the wireless mesh backhaul formed amongst SCs. To tackle such uneven consumption of network resources, this thesis presents the design, implementation, and extensive evaluation of a self-organized backpressure routing protocol explicitly designed for the wireless mesh backhaul formed amongst the wireless links of SCs. Whilst backpressure routing in theory promises throughput optimality, its implementation complexity introduces several concerns, such as scalability, large end-to-end latencies, and centralization of all the network state. To address these issues, we present a throughput suboptimal yet scalable, decentralized, low-overhead, and low-complexity backpressure routing scheme. More specifically, the contributions in this thesis can be summarized as follows: We formulate the routing problem for the wireless mesh backhaul from a stochastic network optimization perspective, and solve the network optimization problem using the Lyapunov-driftplus-penalty method. The Lyapunov drift refers to the difference of queue backlogs in the network between different time instants, whereas the penalty refers to the routing cost incurred by some network utility parameter to optimize. In our case, this parameter is based on minimizing the length of the path taken by packets to reach their intended destination. Rather than building routing tables, we leverage geolocation information as a key component to complement the minimization of the Lyapunov drift in a decentralized way. In fact, we observed that the combination of both components helps to mitigate backpressure limitations (e.g., scalability,centralization, and large end-to-end latencies). The drift-plus-penalty method uses a tunable optimization parameter that weight the relative importance of queue drift and routing cost. We find evidence that, in fact, this optimization parameter impacts the overall network performance. In light of this observation, we propose a self-organized controller based on locally available information and in the current packet being routed to tune such an optimization parameter under dynamic traffic demands. Thus, the goal of this heuristically built controller is to maintain the best trade-off between the Lyapunov drift and the penalty function to take into account the dynamic nature of semi-planned SC deployments. We propose low complexity heuristics to address problems that appear under different wireless mesh backhaul scenarios and conditions..

Topology Management for Wireless Mesh Self-Organizing Mobile Backhauls

The mobile data consumption is increasing exponentially, creating demand for more capacity from the network. Cell densification with small cells, also known as Heterogeneous networks, is seen as a solution for the capacity problem. On the downside, this creates a problem for providing a cost-effective backhaul connection to these small cells. The Self-optimizing Wireless Mesh Network (SWMN) backhaul has been proposed as a backhaul solution for small cells. In SWMN, the nodes form a partial mesh topology, where routing and data transmission is based on pre-computed prioritized set of routes and link-schedules. Hence, an entity that handles topology management functionalities is required, which enables automatic network configuration, network monitoring, optimization and management. The main aim of this thesis is to verify the topology management functionalities. The work involved development of a simulator for creating test topology scenarios. Additionally, the task involved verifying the feasibility of functionalities in the proof-of-concept system

Ubiquitous robust communications for emergency response using multi-operator heterogeneous networks

A number of disasters in various places of the planet have caused an extensive loss of lives, severe damages to properties and the environment, as well as a tremendous shock to the survivors. For relief and mitigation operations, emergency responders are immediately dispatched to the disaster areas. Ubiquitous and robust communications during the emergency response operations are of paramount importance. Nevertheless, various reports have highlighted that after many devastating events, the current technologies used, failed to support the mission critical communications, resulting in further loss of lives. Inefficiencies of the current communications used for emergency response include lack of technology inter-operability between different jurisdictions, and high vulnerability due to their centralized infrastructure. In this article, we propose a flexible network architecture that provides a common networking platform for heterogeneous multi-operator networks, for interoperation in case of emergencies. A wireless mesh network is the main part of the proposed architecture and this provides a back-up network in case of emergencies. We first describe the shortcomings and limitations of the current technologies, and then we address issues related to the applications and functionalities a future emergency response network should support. Furthermore, we describe the necessary requirements for a flexible, secure, robust, and QoS-aware emergency response multi-operator architecture, and then we suggest several schemes that can be adopted by our proposed architecture to meet those requirements. In addition, we suggest several methods for the re-tasking of communication means owned by independent individuals to provide support during emergencies. In order to investigate the feasibility of multimedia transmission over a wireless mesh network, we measured the performance of a video streaming application in a real wireless metropolitan multi-radio mesh network, showing that the mesh network can meet the requirements for high quality video transmissions