Continuous Wavelet Transform and Hidden Markov Model Based Target Detection

Standard tracking filters perform target detection process by comparing the sensor output signal with a predefined threshold. However, selecting the detection threshold is of great importance and a wrongly selected threshold causes two major problems. The first problem occurs when the selected threshold is too low which results in increased false alarm rate. The second problem arises when the selected threshold is too high resulting in missed detection. Track-before-detect (TBD) techniques eliminate the need for a detection threshold and provide detecting and tracking targets with lower signal-to-noise ratios than standard methods. Although TBD techniques eliminate the need for detection threshold at sensor’s signal processing stage, they often use tuning thresholds at the output of the filtering stage. This paper presents a Continuous Wavelet Transform (CWT) and Hidden Markov Model (HMM) based target detection method for employing with TBD techniques which does not employ any thresholding

Constant False Alarm Rate Target Detection in Synthetic Aperture Radar Imagery

Target detection plays a significant role in many synthetic aperture radar (SAR) applications, ranging from surveillance of military tanks and enemy territories to crop monitoring in agricultural uses. Detection of targets faces two major problems namely, first, how to remotely acquire high resolution images of targets, second, how to efficiently extract information regarding features of clutter-embedded targets. The first problem is addressed by the use of high penetration radar like synthetic aperture radar. The second problem is tackled by efficient algorithms for accurate and fast detection. So far, there are many methods of target detection for SAR imagery available such as CFAR, generalized likelihood ratio test (GLRT) method, multiscale autoregressive method, wavelet transform based method etc. The CFAR method has been extensively used because of its attractive features like simple computation and fast detection of targets. The CFAR algorithm incorporates precise statistical description of background clutter which determines how accurately target detection is achieved. The primary goal of this project is to investigate the statistical distribution of SAR background clutter from homogeneous and heterogeneous ground areas and analyze suitability of statistical distributions mathematically modelled for SAR clutter. The threshold has to be accurately computed based on statistical distribution so as to efficiently distinguish target from SAR clutter. Several distributions such as lognormal, Weibull, K, KK, G0, generalized Gamma (GGD) distributions are considered for clutter amplitude modeling in SAR images. The CFAR detection algorithm based on appropriate background clutter distribution is applied to moving and stationary target acquisition and recognition (MSTAR) images. The experimental results show that, CFAR detector based on GGD outmatches CFAR detectors based on lognormal, Weibull, K, KK, G0 distributions in terms of accuracy and computation time.

Automatic refocus and feature extraction of single-look complex SAR signatures of vessels

In recent years, spaceborne synthetic aperture radar ( SAR) technology has been considered as a complement to cooperative vessel surveillance systems thanks to its imaging capabilities. In this paper, a processing chain is presented to explore the potential of using basic stripmap single-look complex ( SLC) SAR images of vessels for the automatic extraction of their dimensions and heading. Local autofocus is applied to the vessels' SAR signatures to compensate blurring artefacts in the azimuth direction, improving both their image quality and their estimated dimensions. For the heading, the orientation ambiguities of the vessels' SAR signatures are solved using the direction of their ground-range velocity from the analysis of their Doppler spectra. Preliminary results are provided using five images of vessels from SLC RADARSAT-2 stripmap images. These results have shown good agreement with their respective ground-truth data from Automatic Identification System ( AIS) records at the time of the acquisitions.Postprint (published version

Airborne Infrared Search and Track Systems

Infrared search and track (IRST) systems are required for fighter aircraft to enable them to passively search, detect, track, classify, and prioritise multiple airborne targets under all aspects, look-up, look-down, and co-altitude conditions and engage them at as long ranges as possible. While the IRST systems have been proven in performance for ground-based and naval-based platforms, it is still facing some technical problems for airborne applications. These problems arise from uncertainty in target signature, atmospheric effects, background clutter (especially dense and varying clouds), signal and data processing algorithms to detect potential targets at long ranges and some hardware limitations such as large memory requirement to store and process wide field of view data. In this paper, an overview of airborne IRST as a system has been presented with detailed comparative simulation results of different detectionitracking algorithms and the present status of airborne IRST

A comparative study of operational vessel detectors for maritime surveillance using satellite-borne synthetic aperture radar

This paper presents a comparative study among four operational detectors that work by automatically post-processing synthetic aperture radar (SAR) images acquired from the satellite platforms RADARSAT-2 and COSMO-SkyMed. Challenging maritime scenarios have been chosen to assess the detectors' performance against features such as ambiguities, significant sea clutter, or irregular shorelines. The SAR images which form the test data are complemented with ground truth to define the reference detection configuration, which permits quantifying the probability of detection, the false alarm rate, and the accuracy of estimating ship dimensions. Although the results show that all the detectors perform well, there is no perfect detector, and a better detection system could be developed that combines the best elements from each of the single detectors. In addition to the comparison exercise, the study has facilitated the improvement of the detectors by highlighting weaknesses and providing means for fixing them.Peer ReviewedPostprint (published version

Maritime Radar Target Detection Using Time Frequency Analysis

Small target detection in sea clutter remains a challenging problem for radar operators as the backscatter from the sea-surface is complex, involving both time and range varying Doppler spectra with strong breaking waves which can last for seconds and resemble targets. The goal of this thesis is to investigate two different time frequency wavelet transforms to filter the sea clutter and improve target detection performance. The first technique looks at an application of stationary wavelet transforms (SWT) to improve target detection. The SWT decomposes a signal into different components (or sub-bands) which contain different characteristics of the interference (clutter + noise) and target. A method of selecting the sub-band with the most information about the target is then presented using an ‘entropy’ based metric. To validate the SWT detection scheme, real radar data recorded from both an airborne and a ground based radar systems are analysed. A Monte-Carlo simulation using a cell averaging constant false alarm rate detector is implemented to demonstrate and quantify the improvement of the new scheme against unfiltered data. The second technique utilises a sparse signal separation method known as basis pursuit denoising (BPD). Two main factors contribute to the quality of the separation between the target and sea-clutter: choice of dictionary that promotes sparsity, and the regularisation (or penalty) parameter in the BPD formulation. In this implementation, a tuned Q-factor wavelet transform (TQWT) is used for the dictionary with parameters chosen to match the desired target velocity. An adaptive method is then developed to improve the separation of targets from sea-clutter based on a smoothed estimate of the sea clutter standard deviation across range. A new detection scheme is then developed and the detection improvement is demonstrated using a Monte-Carlo simulation.Thesis (Ph.D.) -- University of Adelaide, School of Electrical & Electronic Engineering, 201

Adjacent Infrared Multitarget Detection Using Robust Background Estimation

Small target detection is very important for infrared search and track (IRST) problems. Grouped targets are difficult to detect using the conventional constant false alarm rate (CFAR) detection method. In this study, a novel multitarget detection method was developed to identify adjacent or closely spaced small infrared targets. The neighboring targets decrease the signal-to-clutter ratio in hysteresis threshold-based constant false alarm rate (H-CFAR) detection, which leads to poor detection performance in cluttered environments. The proposed adjacent target rejection-based robust background estimation can reduce the effects of the neighboring targets and enhance the small multitarget detection performance in infrared images by increasing the signal-to-clutter ratio. The experimental results of the synthetic and real adjacent target sequences showed that the proposed method produces an upgraded detection rate with the same false alarm rate compared to the recent target detection methods (H-CFAR, Top-hat, and TDLMS).111Ysciescopu

Sonar image interpretation for sub-sea operations

Mine Counter-Measure (MCM) missions are conducted to neutralise underwater explosives. Automatic Target Recognition (ATR) assists operators by increasing the speed and accuracy of data review. ATR embedded on vehicles enables adaptive missions which increase the speed of data acquisition. This thesis addresses three challenges; the speed of data processing, robustness of ATR to environmental conditions and the large quantities of data required to train an algorithm. The main contribution of this thesis is a novel ATR algorithm. The algorithm uses features derived from the projection of 3D boxes to produce a set of 2D templates. The template responses are independent of grazing angle, range and target orientation. Integer skewed integral images, are derived to accelerate the calculation of the template responses. The algorithm is compared to the Haar cascade algorithm. For a single model of sonar and cylindrical targets the algorithm reduces the Probability of False Alarm (PFA) by 80% at a Probability of Detection (PD) of 85%. The algorithm is trained on target data from another model of sonar. The PD is only 6% lower even though no representative target data was used for training. The second major contribution is an adaptive ATR algorithm that uses local sea-floor characteristics to address the problem of ATR robustness with respect to the local environment. A dual-tree wavelet decomposition of the sea-floor and an Markov Random Field (MRF) based graph-cut algorithm is used to segment the terrain. A Neural Network (NN) is then trained to filter ATR results based on the local sea-floor context. It is shown, for the Haar Cascade algorithm, that the PFA can be reduced by 70% at a PD of 85%. Speed of data processing is addressed using novel pre-processing techniques. The standard three class MRF, for sonar image segmentation, is formulated using graph-cuts. Consequently, a 1.2 million pixel image is segmented in 1.2 seconds. Additionally, local estimation of class models is introduced to remove range dependent segmentation quality. Finally, an A* graph search is developed to remove the surface return, a line of saturated pixels often detected as false alarms by ATR. The A* search identifies the surface return in 199 of 220 images tested with a runtime of 2.1 seconds. The algorithm is robust to the presence of ripples and rocks

Research on Target Detection Algorithm of Radar and Visible Image Fusion Based on Wavelet Transform

The target detection rate of unmanned surface vehicle is low because of waves, fog, background clutter and other environmental factors on the interference. Therefore, the paper studies the target detection algorithm of radar and visible image fusion based on wavelet transform. The visible image is preprocessed to ensure the detection effect. The multi-scale fractal model is used to extract the target features, and the difference between the fractal features of the target and the background is used to detect the target. The radar image is denoised by a combination of median filtering and wavelet transform. The processed visible light and radar image are fused with wavelet transform strategy. The coefficients of the low frequency sub-band are processed by the average fusion strategy. The coefficients of the high frequency sub-band are processed using a strategy with a higher absolute value. The standard deviation, the spatial frequency and the contrast resolution of the image fusion result are compared. The simulation results show that the processed image is better than the unprocessed image after the fusion

Чувствительность напряжений по обводу контура фантома к изменениям комплексных сопротивлений неоднородностей в электроимпедансной томографии

Проведено аналіз впливу значень поверхневої провідності неоднорідностей на зміну значень комплексних напруг по обводу контуру фантома, порівняно з однорідним фантомом з комплексною поверхневою провідністю. Проведено аналіз впливу анізотропії скінченного елемента та всього фантома в цілому на обчислювані комплексні напруги. Отримано модель скінченного квадратного елемента, який складається з 1024х1024 скінченних елементів, отриманих по спрощеним наближеним формулам. Констатовано, що незалежно від різниці абсолютних значень напруг, виміряних при різних положеннях джерела струму, їх відносні прирощення залишаються незмінними. Для боротьби з такого роду анізотропією запропоновано разом з джерелом обертати сітки фантомів, як скінченних елементів, так і зон провідності. Остаточні висновки про межі чутливості вимірювальних пристроїв можна буде зробити лише після накопичення статистичних даних розв’язання зворотної задачі, обраним авторами методом зон провідності.Introduction. The analysis of surface conductivity influence of inhomogeneities to the changes of complex phantom contour voltages comparing with a homogeneous phantom with complex surface conductivity is carried out. The analysis of the influence of finite element and all phantom generally anisotropy on the calculated complex voltages is conducted. The results. The model of square finite element is obtained. It consists of 1024х1024 finite elements obtained by simplified approximate formulas. The relative increments of voltage values are unchanged regardless of the difference in the absolute values of voltages measured at different positions of the current source. It is proposed to rotate the phantom grids of finite elements and conductivity zones with the current source rotation to overcome this anisotropy. Conclusions. Final conclusions about the limits of the measuring device sensitivity could be done only after the data accumulation of solving the inverse problem by zones conductivity method.Проведен анализ влияния значений поверхностной проводимости неоднородностей на изменение значений комплексных напряжений по обводу контура фантома в сравнении с однородным фантомом с комплексной поверхностной проводимостью. Выполнен анализ влияния анизотропии конечного элемента и всего фантома в целом на вычисляемые комплексные напряжения. Получена модель конечного квадратного элемента, составленного из 1024х1024 конечных элементов, полученных по упрощенным формулам. Отмечено, что независимо от разницы абсолютных значений напряжений, вычисленных при различных положениях источника тока, их относительные приращения остаются неизменными. Для борьбы с такого рода анизотропией предложено вместе с источником поворачивать сетки фантомов, как конечных элементов, так и зон проводимости. Окончательные выводы о границах чувствительности измерительных устройств можно будет сделать после накопления статистических данных решения обратной задачи, выбранным авторами метода зон проводимости