Development of Lifting-based VLSI Architectures for Two-Dimensional Discrete Wavelet Transform

Two-dimensional discrete wavelet transform (2-D DWT) has evolved as an essential part of a modem compression system. It offers superior compression with good image quality and overcomes disadvantage of the discrete cosine transform, which suffers from blocks artifacts that reduces the quality of the inage. The amount of computations involve in 2-D DWT is enormous and cannot be processed by generalpurpose processors when real-time processing is required. Th·"efore, high speed and low power VLSI architecture that computes 2-D DWT effectively is needed. In this research, several VLSI architectures have been developed that meets real-time requirements for 2-D DWT applications. This research iaitially started off by implementing a software simulation program that decorrelates the original image and reconstructs the original image from the decorrelated image. Then, based on the information gained from implementing the simulation program, a new approach for designing lifting-based VLSI architectures for 2-D forward DWT is introduced. As a result, two high performance VLSI architectures that perform 2-D DWT for 5/3 and 9/7 filters are developed based on overlapped and nonoverlapped scan methods. Then, the intermediate architecture is developed, which aim a·: reducing the power consumption of the overlapped areas without using the expensive line buffer. In order to best meet real-time applications of 2-D DWT with demanding requirements in terms of speed and throughput parallelism is explored. The single pipelined intermediate and overlapped architectures are extended to 2-, 3-, and 4-parallel architectures to achieve speed factors of 2, 3, and 4, respectively. To further demonstrate the effectiveness of the approach single and para.llel VLSI architectures for 2-D inverse discrete wavelet transform (2-D IDWT) are developed. Furthermore, 2-D DWT memory architectures, which have been overlooked in the literature, are also developed. Finally, to show the architectural models developed for 2-D DWT are simple to control, the control algorithms for 4-parallel architecture based on the first scan method is developed. To validate architectures develcped in this work five architectures are implemented and simulated on Altera FPGA. In compliance with the terms of the Copyright Act 1987 and the IP Policy of the university, the copyright of this thesis has been reassigned by the author to the legal entity of the university, Institute of Technology PETRONAS Sdn bhd. Due acknowledgement shall always be made of the use of any material contained in, or derived from, this thesis

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci

Hardware implementation of daubechies wavelet transforms using folded AIQ mapping

The Discrete Wavelet Transform (DWT) is a popular tool in the field of image and video compression applications. Because of its multi-resolution representation capability, the DWT has been used effectively in applications such as transient signal analysis, computer vision, texture analysis, cell detection, and image compression. Daubechies wavelets are one of the popular transforms in the wavelet family. Daubechies filters provide excellent spatial and spectral locality-properties which make them useful in image compression. In this thesis, we present an efficient implementation of a shared hardware core to compute two 8-point Daubechies wavelet transforms. The architecture is based on a new two-level folded mapping technique, an improved version of the Algebraic Integer Quantization (AIQ). The scheme is developed on the factorization and decomposition of the transform coefficients that exploits the symmetrical and wrapping structure of the matrices. The proposed architecture is parallel, pipelined, and multiplexed. Compared to existing designs, the proposed scheme reduces significantly the hardware cost, critical path delay and power consumption with a higher throughput rate. Later, we have briefly presented a new mapping scheme to error-freely compute the Daubechies-8 tap wavelet transform, which is the next transform of Daubechies-6 in the Daubechies wavelet series. The multidimensional technique maps the irrational transformation basis coefficients with integers and results in considerable reduction in hardware and power consumption, and significant improvement in image reconstruction quality

FlexWAFE - eine Architektur für rekonfigurierbare-Bildverarbeitungssysteme

Recently there has been an increase in demand for high-resolution digital media content in both cinema and television industries. Currently existing equipment does not meet the requirements, or is too costly. New hardware systems and new programming techniques are needed in order to meet the high-resolution, high-quality, image requirements and reduce costs. The industry seeks a flexible architecture capable of running multiple applications on top of standard off-the-shelf components, with reduced development time. Until now, standard practice has been to develop specialized architectures and systems that target a single application. This has little flexibility and leads to high developments costs, every new application is designed almost from scratch. Our focus was to develop an architecture that is suited to image stream processing and has the flexibility to run multiple applications using the same FPGA-based hardware platform. The novelty in our approach is that we reconfigure parts of the architecture at run-time, but without incurring in the time and added constraints penalty of FPGA-partial-reconfiguration techniques. The architecture uses a hierarchical control structure that is well suited to parallel processing, and allows single cycle latency reconfiguration of parts of the processing pipeline. This is achieved using relatively little resources for the distributed control structures. To test the developed architecture a complex film-grain noise reduction algorithm was implemented on an off-the-shelf hardware platform developed by Thomson-Grass Valley. The system meet all the requirements and had very little load on the hierarchical control structures, there is growth headroom for much complexer control demands. The architecture has been ported to other hardware platforms, and other applications have been implemented as well. The run-time reconfigurability has proven to be a key factor in the success of the FlexWAFE.Kürzlich gab es eine Zunahme der Nachfrage nach hochauflösenden digitalen Medieninhalten in den Kino- und Fernsehenindustrien. Derzeit vorhandene Systeme entsprechen nicht den Anforderungen, oder sind zu teuer. Neue Hardware-Systeme und neuer Programmiertechniken sind erforderlich, um den hochauflösenden, hochwertigen, Bildanforderungen zu genügen und Kosten zu verringern. Die Industrie sucht eine flexible Architektur zur Ausführung mehrerer Anwendungen auf Standard-Komponenten, mit reduzierten Entwicklungszeiten. Bis jetzt ist gängige Praxis, spezialisierten Architektur und Systeme zu entwickeln, die eine einzelne Anwendung zielen. Dieses hat wenig Flexibilität und führt zu hohe Entwicklungskosten, jede neue Anwendung ist fast von Grund auf neu konzipiert. Unser Fokus war es, eine für Bild Verarbeitung geeignet Architektur zu entwickeln dass die Flexibilität hat mehrere Anwendungen an dieselbe FPGA-basierte Hardware-Plattform zu laufen. Die Neuheit in unserem Ansatz ist, dass wir Teile der Architektur zur Laufzeit rekonfigurieren, aber, ohne das Zeit und constraints strafe von FPGA Partielle-Rekonfiguration-Techniken. Die Architektur verwendet eine hierarchische Kontrollstruktur, die zur parallel Verarbeitung gut geeignet ist, und Single-Cycle-Latenz Rekonfiguration von Teilen der Verarbeitungs-Pipeline ermöglicht. Dieses wird unter Verwendung relativ weniger Ressourcen für die verteiltes Steuerung Strukturen erzielt. Um das entwickelte Architektur zu testen ein komplexer Film-Korn-Rauschunterdrückung Algorithmus wurde auf einer von Thomson-Grass Valley entwickelt standard Hardware-Plattform umgesetzt. Das System erfüllt alle Anforderungen und hatte sehr wenig Last auf den hierarchischen Kontrollstrukturen, es gibt viel Wachstum Spielraum für viel kompliziertere Steuerunganforderungen. Die Architektur ist zu anderen Hardwareplattformen portiert worden, und andere Anwendungen wurden ebenfalls implementiert. Der Laufzeitreconfigurability ist ein Schlüsselfaktor im Erfolg des FlexWAFE gewesen

Measurements, Models, Systems and Design

531 s.

Discrete Wavelet Transforms

The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications

Efficient architectures for multidimensional discrete transforms in image and video processing applications

PhD ThesisThis thesis introduces new image compression algorithms, their related architectures and data transforms architectures. The proposed architectures consider the current hardware architectures concerns, such as power consumption, hardware usage, memory requirement, computation time and output accuracy. These concerns and problems are crucial in multidimensional image and video processing applications. This research is divided into three image and video processing related topics: low complexity non-transform-based image compression algorithms and their architectures, architectures for multidimensional Discrete Cosine Transform (DCT); and architectures for multidimensional Discrete Wavelet Transform (DWT). The proposed architectures are parameterised in terms of wordlength, pipelining and input data size. Taking such parameterisation into account, efficient non-transform based and low complexity image compression algorithms for better rate distortion performance are proposed. The proposed algorithms are based on the Adaptive Quantisation Coding (AQC) algorithm, and they achieve a controllable output bit rate and accuracy by considering the intensity variation of each image block. Their high speed, low hardware usage and low power consumption architectures are also introduced and implemented on Xilinx devices. Furthermore, efficient hardware architectures for multidimensional DCT based on the 1-D DCT Radix-2 and 3-D DCT Vector Radix (3-D DCT VR) fast algorithms have been proposed. These architectures attain fast and accurate 3-D DCT computation and provide high processing speed and power consumption reduction. In addition, this research also introduces two low hardware usage 3-D DCT VR architectures. Such architectures perform the computation of butterfly and post addition stages without using block memory for data transposition, which in turn reduces the hardware usage and improves the performance of the proposed architectures. Moreover, parallel and multiplierless lifting-based architectures for the 1-D, 2-D and 3-D Cohen-Daubechies-Feauveau 9/7 (CDF 9/7) DWT computation are also introduced. The presented architectures represent an efficient multiplierless and low memory requirement CDF 9/7 DWT computation scheme using the separable approach. Furthermore, the proposed architectures have been implemented and tested using Xilinx FPGA devices. The evaluation results have revealed that a speed of up to 315 MHz can be achieved in the proposed AQC-based architectures. Further, a speed of up to 330 MHz and low utilisation rate of 722 to 1235 can be achieved in the proposed 3-D DCT VR architectures. In addition, in the proposed 3-D DWT architecture, the computation time of 3-D DWT for data size of 144×176×8-pixel is less than 0.33 ms. Also, a power consumption of 102 mW at 50 MHz clock frequency using 256×256-pixel frame size is achieved. The accuracy tests for all architectures have revealed that a PSNR of infinite can be attained