Low Leakage and Robust Sub-threshold SRAM Cell using Memristor

This work aims to improve the total power dissipation, leakage currents and stability without disturbing the logic state of SRAM cell with concept called sub-threshold operation. Though, sub-threshold SRAM proves to be advantageous but fails with basic 6T SRAM cell during readability and writability. In this paper we have investigated a non-volatile 6T2M (6 Transistors & 2 Memristors) sub-threshold SRAM cell working at lower supply voltage of VDD=0.3V, where Memristor is used to store the information even at power failures and restores previous data with successful read and write operation overcomes the challenge faced. This paper also proposes a new configuration of non-volatile 6T2M (6 Transistors & 2 Memristors) sub-threshold SRAM cell resulting in improved behaviour in terms of power, stability and leakage current where read and write power has improved by 40% and 90% respectively when compared to 6T2M (conventional) SRAM cell. The proposed 6T2M SRAM cell offers good stability of RSNM=65mV and WSNM=93mV which is much improved at low voltage when compared to conventional basic 6T SRAM cell, and improved leakage current of 4.92nA is achieved as compared

Ultra-low Power FinFET SRAM Cell with improved stability suitable for low power applications

In this paper, a new 11T SRAM cell using FinFET technology has been proposed, the basic component of the cell is the 6T SRAM cell with 4 NMOS access transistors to improve the stability and also makes it a dual port memory cell. The proposed cell uses a header scheme in which one extra PMOS transistor is used which is biased at different voltages to improve the read and write stability thus, helps in reducing the leakage power and active power. The cell shows improvement in RSNM (Read Static Noise Margin) with LP8T by 2.39x at sub-threshold voltage 2.68x with D6T SRAM cell, 5.5x with TG8T. The WSNM (Write Static Noise Margin) and HM (Hold Margin) of the SRAM cell at 0.9V is 306mV and 384mV. At sub-threshold operation also it shows improvement. The Leakage power reduced by 0.125x with LP8T, 0.022x with D6T SRAM cell, TG8T and SE8T. Also, impact of process variation on cell stability is discussed

Defective Behaviour of an 8T SRAM Cell with Open Defects

The defective behaviour of an 8T SRAM cell with open defects is analyzed. Full and resistive open defects have been considered in the electrical characterization of the defective cell. Due to the similarity between the classical 6T SRAM cell and the 8T cell, only defects affecting the read port transistors have been considered. In the work, it is shown how an open in a defective cell may influence the correct operation of a victim cell sharing the same read circuitry. Also, it is shown that the sequence of bits written on the defective cell prior to a read action can mask the presence of the defect. Different orders of critical resistance have been found depending on the location of the open defect. A 45nm technology has been used for the illustrative example presented in the wor

Expanded Noise Margin 10T SRAM Cell using Finfet Device

Static random access memory (SRAM) cells are being improved in order to increase resistance to device level changes and satisfy the requirements of low-power applications. A unique 10-transistor FinFET-based SRAM cell with single-ended read and differential write functionality is presented in this study. This cutting-edge architecture is more power-efficient than ST (Schmitt trigger) 10T or traditional 6T SRAM cells, using only 1.87 and 1.6 units of power respectively during read operations. The efficiency is attributable to a lower read activity factor, which saves electricity. The read static noise margin (RSNM) and write static noise margin (WSNM) of the proposed 10T SRAM cell show notable improvements over the 6T SRAM cell, increasing by 1.67 and 1.86, respectively. Additionally, compared to the 6T SRAM cell, the read access time has been significantly reduced by 1.96 seconds. Utilising the Cadence Virtuoso tool and an 18nm Advanced Node Process Design Kit (PDK) technology file, the design's efficacy has been confirmed. For low-power electronic systems and next-generation memory applications, this exciting 10T SRAM cell has a lot of potential

PERFORMANCE EVALUTION OF CNTFET-BASED SRAM CELL DESIGN

Carbon Nanotube Field-Effect Transistor (CNTFET) technology with their excellent current capabilities, ballistic transport operation and superior thermal conductivities has proved to be a very promising and superior alternative to the conventional CMOS technology. A detailed analysis and simulation based assessment of circuit performance of this technology is presented here. As figures of merit speed, power consumption and stability are considered to evaluate the performance parameters of CNTFET-Based SRAM Cells with different chiral vectors for the optimum performance. A novel performance metric, presented as “SPR,” is used to assess these figures of merit. This comprehensive metric includes a metric of low power delay product (PDP) for write operation and high stability in the operation of a memory cell. It is shown that an 8T SRAM cell provides 73% higher SPR than Dual-Chiral based 6T SRAM cell for CNT technology and 124% higher SPR than its CMOS counterpart, thus attaining superior performance. The CNTFET-based 8T SRAM cell demonstrates that it provides high stability, low delay and low power, which is better than CNTFET-based 6T SRAM cell as well as CMOS SRAM cell

Accurate simulations of the interplay between process and statistical variability for nanoscale FinFET-based SRAM cell stability

In this paper we illustrate how by using advanced atomistic TCAD tools the interplay between long-range process variation and short-range statistical variability in FinFETs can be accurately modelled and simulated for the purposes of Design-Technology Co-Optimization (DTCO). The proposed statistical simulation and compact modelling methodology is demonstrated via a comprehensive evaluation of the impact of FinFET variability on SRAM cell stability

Low-Power And High Performance Of An Optimized FinFET Based 8T SRAM Cell Design

The development of the nanotechnology leadsto the shrinking of the size of the transistors to nanometerregion. However, there are a lot of challenges due to sizescaling of the transistors such as short channel effects (SCEs)and threshold voltage roll-off issues. Fin-Type Field EffectTransistor (FinFET) is another alternative technology tosolve the issues of the conventional MOSFET and increasethe performance of the Static Random Access Memory(SRAM) circuit design. FinFET based SRAMs are faster andmore reliable which are often used as memory cache for highspeed operation. However, 6T SRAM cell suffers from accesstransistor sizing conflict resulting in a trade-off between readand write stability. This paper presents an investigation ofthe stability performance in retention, read and write modeof 22nm FinFET based 8T SRAM cell. The performancecomparison of 22nm FinFET based 6T and 8T SRAMs weremade. The simulation of the SRAM model are carried out inGTS Framework TCAD tool based on 22nm technology. In8T SRAM cell, two n-FinFETs are added to the conventional6T SRAM cell which will be controlled by the Read WordLine (RWL) to isolate the read and write operation path forbetter read stability. FinFET based 8T SRAM cell givesbetter performance in Static Noise Margin (SNM) and powerconsumption than 6T SRAM cells. The simulation resultsaffirms the proposed FinFET based 8T SRAM improvedread static noise margin by 166.67% and power consumptionby 76.13% as compared to the FinFET based 6T SRAM

Multi-port Memory Design for Advanced Computer Architectures

In this thesis, we describe and evaluate novel memory designs for multi-port on-chip and off-chip use in advanced computer architectures. We focus on combining multi-porting and evaluating the performance over a range of design parameters. Multi-porting is essential for caches and shared-data systems, especially multi-core System-on-chips (SOC). It can significantly increase the memory access throughput. We evaluate FinFET voltage-mode multi-port SRAM cells using different metrics including leakage current, static noise margin and read/write performance. Simulation results show that single-ended multi-port FinFET SRAMs with isolated read ports offer improved read stability and flexibility over classical double-ended structures at the expense of write performance. By increasing the size of the access transistors, we show that the single-ended multi-port structures can achieve equivalent write performance to the classical double-ended multi-port structure for 9% area overhead. Moreover, compared with CMOS SRAM, FinFET SRAM has better stability and standby power. We also describe new methods for the design of FinFET current-mode multi-port SRAM cells. Current-mode SRAMs avoid the full-swing of the bitline, reducing dynamic power and access time. However, that comes at the cost of voltage drop, which compromises stability. The design proposed in this thesis utilizes the feature of Independent Gate (IG) mode FinFET, which can leverage threshold voltage by controlling the back gate voltage, to merge two transistors into one through high-Vt and low-Vt transistors. This design not only reduces the voltage drop, but it also reduces the area in multi-port current-mode SRAM design. For off-chip memory, we propose a novel two-port 1-read, 1-write (1R1W) phasechange memory (PCM) cell, which significantly reduces the probability of blocking at the bank levels. Different from the traditional PCM cell, the access transistors are at the top and connected to the bitline. We use Verilog-A to model the behavior of Ge2Sb2Te5 (GST: the storage component). We evaluate the performance of the two-port cell by transistor sizing and voltage pumping. Simulation results show that pMOS transistor is more practical than nMOS transistor as the access device when both area and power are considered. The estimated area overhead is 1.7�, compared to single-port PCM cell. In brief, the contribution we make in this thesis is that we propose and evaluate three different kinds of multi-port memories that are favorable for advanced computer architectures