A RELIABILITY-BASED ROUTING PROTOCOL FOR VEHICULAR AD-HOC NETWORKS

Vehicular Ad hoc NETworks (VANETs), an emerging technology, would allow vehicles to form a self-organized network without the aid of a permanent infrastructure. As a prerequisite to communication in VANETs, an efficient route between communicating nodes in the network must be established, and the routing protocol must adapt to the rapidly changing topology of vehicles in motion. This is one of the goals of VANET routing protocols. In this thesis, we present an efficient routing protocol for VANETs, called the Reliable Inter-VEhicular Routing (RIVER) protocol. RIVER utilizes an undirected graph that represents the surrounding street layout where the vertices of the graph are points at which streets curve or intersect, and the graph edges represent the street segments between those vertices. Unlike existing protocols, RIVER performs real-time, active traffic monitoring and uses this data and other data gathered through passive mechanisms to assign a reliability rating to each street edge. The protocol then uses these reliability ratings to select the most reliable route. Control messages are used to identify a node’s neighbors, determine the reliability of street edges, and to share street edge reliability information with other nodes

Contributions to the routing of traffic flows in multi-hop IEEE 802.11 wireless networks

The IEEE 802.11 standard was not initially designed to provide multi-hop capabilities. Therefore, providing a proper traffic performance in Multi-Hop IEEE 802.11 Wireless Networks (MIWNs) becomes a significant challenge. The approach followed in this thesis has been focused on the routing layer in order to obtain applicable solutions not dependent on a specific hardware or driver. Nevertheless, as is the case of most of the research on this field, a cross-layer design has been adopted. Therefore, one of the first tasks of this work was devoted to the study of the phenomena which affect the performance of the flows in MIWNs. Different estimation methodologies and models are presented and analyzed. The first main contribution of this thesis is related to route creation procedures. First, FB-AODV is introduced, which creates routes and forwards packets according to the flows on the contrary to basic AODV which is destination-based. This enhancement permits to balance the load through the network and gives a finer granularity in the control and monitoring of the flows. Results showed that it clearly benefits the performance of the flows. Secondly, a novel routing metric called Weighted Contention and Interference routing Metric (WCIM) is presented. In all analyzed scenarios, WCIM outperformed the other analyzed state-of-the-art routing metrics due to a proper leveraging of the number of hops, the link quality and the suffered contention and interference. The second main contribution of this thesis is focused on route maintenance. Generally, route recovery procedures are devoted to the detection of link breaks due to mobility or fading. However, other phenomena like the arrival of new flows can degrade the performance of active flows. DEMON, which is designed as an enhancement of FB-AODV, allows the preemptive recovery of degraded routes by passively monitoring the performance of active flows. Results showed that DEMON obtains similar or better results than other published solutions in mobile scenarios, while it clearly outperforms the performance of default AODV under congestion Finally, the last chapter of this thesis deals with channel assignment in multi-radio solutions. The main challenge of this research area relies on the circular relationship between channel assignment and routing; channel assignment determines the routes that can be created, while the created routes decide the real channel diversity of the network and the level of interference between the links. Therefore, proposals which join routing and channel assignment are generally complex, centralized and based on traffic patterns, limiting their practical implementation. On the contrary, the mechanisms presented in this thesis are distributed and readily applicable. First, the Interference-based Dynamic Channel Assignment (IDCA) algorithm is introduced. IDCA is a distributed and dynamic channel assignment based on the interference caused by active flows which uses a common channel in order to assure connectivity. In general, IDCA leads to an interesting trade-off between connectivity preservation and channel diversity. Secondly, MR-DEMON is introduced as way of joining channel assignment and route maintenance. As DEMON, MR-DEMON monitors the performance of the active flows traversing the links, but, instead of alerting the source when noticing degradation, it permits reallocating the flows to less interfered channels. Joining route recovery instead of route creation simplifies its application, since traffic patterns are not needed and channel reassignments can be locally decided. The evaluation of MR-DEMON proved that it clearly benefits the performance of IDCA. Also, it improves DEMON functionality by decreasing the number of route recoveries from the source, leading to a lower overhead.El estándar IEEE 802.11 no fue diseñado inicialmente para soportar capacidades multi-salto. Debido a ello, proveer unas prestaciones adecuadas a los flujos de tráfico que atraviesan redes inalámbricas multi-salto IEEE 802.11 supone un reto significativo. La investigación desarrollada en esta tesis se ha centrado en la capa de encaminamiento con el objetivo de obtener soluciones aplicables y no dependientes de un hardware específico. Sin embargo, debido al gran impacto de fenómenos y parámetros relacionados con las capas físicas y de acceso al medio sobre las prestaciones de los tráficos de datos, se han adoptado soluciones de tipo cross-layer. Es por ello que las primeras tareas de la investigación, presentadas en los capítulos iniciales, se dedicaron al estudio y caracterización de estos fenómenos. La primera contribución principal de esta tesis se centra en mecanismos relacionados con la creación de las rutas. Primero, se introduce una mejora del protocolo AODV, que permite crear rutas y encaminar paquetes en base a los flujos de datos, en lugar de en base a los destinos como se da en el caso básico. Esto permite balacear la carga de la red y otorga un mayor control sobre los flujos activos y sus prestaciones, mejorando el rendimiento general de la red. Seguidamente, se presenta una métrica de encaminamiento sensible a la interferencia de la red y la calidad de los enlaces. Los resultados analizados, basados en la simulación de diferentes escenarios, demuestran que mejora significativamente las prestaciones de otras métricas del estado del arte. La segunda contribución está relacionada con el mantenimiento de las rutas activas. Generalmente, los mecanismos de mantenimiento se centran principalmente en la detección de enlaces rotos debido a la movilidad de los nodos o a la propagación inalámbrica. Sin embargo, otros fenómenos como la interferencia y congestión provocada por la llegada de nuevos flujos pueden degradar de forma significativa las prestaciones de los tráficos activos. En base a ello, se diseña un mecanismo de mantenimiento preventivo de rutas, que monitoriza las prestaciones de los flujos activos y permite su reencaminamiento en caso de detectar rutas degradadas. La evaluación de esta solución muestra una mejora significativa sobre el mantenimiento de rutas básico en escenarios congestionados, mientras que en escenarios con nodos móviles obtiene resultados similares o puntualmente mejores que otros mecanismos preventivos diseñados específicamente para casos con movilidad. Finalmente, el último capítulo de la tesis se centra en la asignación de canales en entornos multi-canal y multi-radio con el objetivo de minimizar la interferencia entre flujos activos. El reto principal en este campo es la dependencia circular que se da entre la asignación de canales y la creación de rutas: la asignación de canales determina los enlaces existentes la red y por ello las rutas que se podrán crear, pero son finalmente las rutas y los tráficos activos quienes determinan el nivel real de interferencia que se dará en la red. Es por ello que las soluciones que proponen unificar la asignación de canales y el encaminamiento de tráficos son generalmente complejas, centralizadas y basadas en patrones de tráfico, lo que limita su implementación en entornos reales. En cambio, en nuestro caso adoptamos una solución distribuida y con mayor aplicabilidad. Primero, se define un algoritmo de selección de canales dinámico basado en la interferencia de los flujos activos, que utiliza un canal común en todos los nodos para asegurar la conectividad de la red. A continuación, se introduce un mecanismo que unifica la asignación de canales con el mantenimiento preventivo de las rutas, permitiendo reasignar flujos degradados a otros canales disponibles en lugar de reencaminarlos completamente. Ambas soluciones demuestran ser beneficiosas en este tipo de entornos.Postprint (published version

Protocole de routage à chemins multiples pour des réseaux ad hoc

Ad hoc networks consist of a collection of wireless mobile nodes which dynamically exchange data without reliance on any fixed based station or a wired backbone network. They are by definition self-organized. The frequent topological changes make multi-hops routing a crucial issue for these networks. In this PhD thesis, we propose a multipath routing protocol named Multipath Optimized Link State Routing (MP-OLSR). It is a multipath extension of OLSR, and can be regarded as a hybrid routing scheme because it combines the proactive nature of topology sensing and reactive nature of multipath computation. The auxiliary functions as route recovery and loop detection are introduced to improve the performance of the network. The usage of queue length metric for link quality criteria is studied and the compatibility between single path and multipath routing is discussed to facilitate the deployment of the protocol. The simulations based on NS2 and Qualnet softwares are performed in different scenarios. A testbed is also set up in the campus of Polytech’Nantes. The results from the simulator and testbed reveal that MP-OLSR is particularly suitable for mobile, large and dense networks with heavy network load thanks to its ability to distribute the traffic into different paths and effective auxiliary functions. The H.264/SVC video service is applied to ad hoc networks with MP-OLSR. By exploiting the scalable characteristic of H.264/SVC, we propose to use Priority Forward Error Correction coding based on Finite Radon Transform (FRT) to improve the received video quality. An evaluation framework called SVCEval is built to simulate the SVC video transmission over different kinds of networks in Qualnet. This second study highlights the interest of multiple path routing to improve quality of experience over self-organized networks.Les réseaux ad hoc sont constitués d’un ensemble de nœuds mobiles qui échangent des données sans infrastructure de type point d’accès ou artère filaire. Ils sont par définition auto-organisés. Les changements fréquents de topologie des réseaux ad hoc rendent le routage multi-sauts très problématique. Dans cette thèse, nous proposons un protocole de routage à chemins multiples appelé Multipath Optimized Link State Routing (MP-OLSR). C’est une extension d’OLSR à chemins multiples qui peut être considérée comme une méthode de routage hybride. En effet, MP-OLSR combine la caractéristique proactive de la détection de topologie et la caractéristique réactive du calcul de chemins multiples qui est effectué à la demande. Les fonctions auxiliaires comme la récupération de routes ou la détection de boucles sont introduites pour améliorer la performance du réseau. L’utilisation de la longueur des files d’attente des nœuds intermédiaires comme critère de qualité de lien est étudiée et la compatibilité entre routage à chemins multiples et chemin unique est discutée pour faciliter le déploiement du protocole. Les simulations basées sur les logiciels NS2 et Qualnet sont effectuées pour tester le routage MP-OLSR dans des scénarios variés. Une mise en œuvre a également été réalisée au cours de cette thèse avec une expérimentation sur le campus de Polytech’Nantes. Les résultats de la simulation et de l’expérimentation révèlent que MP-OLSR est particulièrement adapté pour les réseaux mobiles et denses avec des trafics élevés grâce à sa capacité à distribuer le trafic dans des chemins différents et à des fonctions auxiliaires efficaces. Au niveau application, le service vidéo H.264/SVC est appliqué à des réseaux ad hoc MP-OLSR. En exploitant la hiérarchie naturelle délivrée par le format H.264/SVC, nous proposons d’utiliser un codage à protection inégale (PFEC) basé sur la Transformation de Radon Finie (FRT) pour améliorer la qualité de la vidéo à la réception. Un outil appelé SVCEval est développé pour simuler la transmission de vidéo SVC sur différents types de réseaux dans le logiciel Qualnet. Cette deuxième étude témoigne de l’intérêt du codage à protection inégale dans un routage à chemins multiples pour améliorer une qualité d’usage sur des réseaux auto-organisés

H3N - Analysewerkzeuge für hybride Wegewahl in heterogenen, unterbrechungstoleranten Ad-Hoc-Netzen für Rettungskräfte

Rettungskräfte müssen unter widrigen Bedingungen zuverlässig kommunizieren können, um in Rettungseinsätzen effizient arbeiten zu können und somit Leben zu retten. Idealerweise ist dazu ein selbstorganisiertes Ad-Hoc-Netz notwendig, weil die Kommunikationsinfrastruktur ggf. beschädigt oder überlastet sein kann. Um die geforderte Robustheit der Kommunikation auch in Szenarien mit größeren zu überbrückenden Entfernungen zu gewährleisten, werden zusätzlich Mechanismen benötigt, die eine Unterbrechungstoleranz ermöglichen. Verzögerungstolerante Netze (engl. Delay Tolerant Networks, kurz: DTN) stellen solche Mechanismen bereit, erfordern aber zusätzliche Verzögerungen, die für Rettungskommunikation nachteilig sind. Deshalb werden intelligente hybride Wegewahlverfahren benötigt, um die Verzögerung durch DTN-Mechanismen zu begrenzen. Außerdem sollten entsprechende Verfahren heterogene Netze unterstützen. Das ermöglicht zusätzlich eine effizientere Weiterleitung durch die Nutzung von Geräten mit unterschiedlichen Kommunikationstechnologien und damit auch Reichweiten. Um solche Systeme und die dafür benötigten Kommunikationsprotokolle zu entwickeln, werden verschiedene Analysewerkzeuge genutzt. Dazu gehören analytische Modelle, Simulationen und Experimente auf der Zielsystemhardware. Für jede Kategorie gibt es verschiedene Werkzeuge und Frameworks, die sich auf unterschiedliche Aspekte fokussieren. Dadurch unterstützen diese herkömmlichen Analysemethoden jedoch meistens nur einen der oben genannten Punkte, während die Untersuchung von hybriden und/oder heterogenen Ansätzen und Szenarien nicht ohne weiteres möglich ist. Im Falle von Rettungskräften kommt hinzu, dass die charakteristischen Merkmale hinsichtlich der Bewegung der Knoten und des erzeugten Datenverkehrs während eines Einsatzes ebenfalls nicht modelliert werden können. In dieser Arbeit werden deshalb verschiedene Erweiterungen zu existierenden Analysewerkzeugen sowie neue Werkzeuge zur Analyse und Modelle zur Nachbildung realistischer Rettungsmissionen untersucht und entwickelt. Ziel ist es, die Vorteile existierender Werkzeuge miteinander zu kombinieren, um ganzheitliche, realitätsnahe Untersuchungen von hybriden Protokollen für heterogene Netze zu ermöglichen. Die Kombination erfolgt in Form von gezielten Erweiterungen und der Entwicklung ergänzender komplementärer Werkzeuge unter Verwendung existierender Schnittstellen. Erste Ergebnisse unter Verwendung der entwickelten Werkzeuge zeigen Verbesserungspotentiale bei der Verwendung traditioneller Protokolle und erlauben die Bewertung zusätzlicher Maßnahmen, um die Kommunikation zu verbessern. Szenarien zur Kommunikation von Rettungskräften werden dabei als ein Beispiel verwendet, die Tools sind jedoch nicht auf die Analyse dieses Anwendungsfalls beschränkt. Über die reine Analyse verschiedener existierender Ansätze hinaus bildet die entwickelte Evaluationsumgebung eine Grundlage für die Entwicklung und Verifikation von neuartigen hybriden Protokollen für die entsprechenden Systeme.Communication between participating first responders is essential for efficient coordination of rescue missions and thus allowing to save human lives. Ideally, ad hoc-style communication networks are applied to this as the first responders cannot rely on infrastructure-based communication for two reasons. First, the infrastructure could be damaged by the disastrous event or not be available for economic reasons. Second, even if public infrastructure is available and functional, it might be overloaded by users. To guarantee the robustness and reliability requirements of first responders, the Mobile Ad Hoc Networks (MANETs) have to be combined with an approach to mitigate intermittent connectivity due to otherwise limited connectivity. Delay Tolerant Networks (DTNs) provide such a functionality but introduce additional delay which is problematic. Therefore, intelligent hybrid routing approaches are required to limit the delay introduced by DTN mechanisms. Besides that, the approach should be applicable to heterogeneous networks in terms of communication technologies and device capabilities. This is required for cross multi-agency and volunteer communication but also enables the opportunistic exploitation of any given communication option. To evaluate such systems and develop the corresponding communication protocols, various tools for the analysis are available. This includes analytical models, simulations and real-world experiments on target hardware. In each category a wide set of tools is available already. However, each tool is focused on specific aspects usually and thus does not provide methods to analyze hybrid approaches out of the box. Even if the tools are modular and allow an extension, there are often other tools that are better suited for partial aspects of hybrid systems. In addition to this, few tools exist to model the characteristics of first responder networks. Especially the generalized movement during missions and the generated data traffic are difficult to model and integrate into analyses. The focus of this project is therefore to develop selected extensions to existing analysis and simulation tools as well as additional tools and models to realistically capture the characteristics of first responder networks. The goal is to combine the advantages of existing specialized simulation tools to enable thorough evaluations of hybrid protocols for heterogeneous networks based on realistic assumptions. To achieve this, the tools are extended by specifically designing tools that enable the interaction between tools and new tools that complement the existing analysis capabilities. First results obtained via the resulting toolbox clearly indicate further research directions as well as a potential for protocol enhancements. Besides that, the toolbox was used to evaluate various methods to enhance the connectivity between nodes in first responder networks. First responder scenarios are used as an example here. The toolbox itself is however not limited to this use case. In addition to the analysis of existing approaches for hybrid and heterogeneous networks, the developed toolbox provides a base framework for the development and verification of newly developed protocols for such use cases

Federal Register

Daily publication of the U.S. Office of the Federal Register contains rules and regulations, proposed legislation and rule changes, and other notices, including "Presidential proclamations and Executive Orders, Federal agency documents having general applicability and legal effect, documents required to be published by act of Congress, and other Federal agency documents of public interest" (p. ii). Table of Contents starts on page iii

A Holmes and Doyle Bibliography, Volume 9: All Formats—Combined Alphabetical Listing

This bibliography is a work in progress. It attempts to update Ronald B. De Waal’s comprehensive bibliography, The Universal Sherlock Holmes, but does not claim to be exhaustive in content. New works are continually discovered and added to this bibliography. Readers and researchers are invited to suggest additional content. This volume contains all listings in all formats, arranged alphabetically by author or main entry. In other words, it combines the listings from Volume 1 (Monograph and Serial Titles), Volume 3 (Periodical Articles), and Volume 7 (Audio/Visual Materials) into a comprehensive bibliography. (There may be additional materials included in this list, e.g. duplicate items and items not yet fully edited.) As in the other volumes, coverage of this material begins around 1994, the final year covered by De Waal's bibliography, but may not yet be totally up-to-date (given the ongoing nature of this bibliography). It is hoped that other titles will be added at a later date. At present, this bibliography includes 12,594 items