Mapping and classification of ecologically sensitive marine habitats using unmanned aerial vehicle (UAV) imagery and object-based image analysis (OBIA)

Nowadays, emerging technologies, such as long-range transmitters, increasingly miniaturized components for positioning, and enhanced imaging sensors, have led to an upsurge in the availability of new ecological applications for remote sensing based on unmanned aerial vehicles (UAVs), sometimes referred to as “drones”. In fact, structure-from-motion (SfM) photogrammetry coupled with imagery acquired by UAVs offers a rapid and inexpensive tool to produce high-resolution orthomosaics, giving ecologists a new way for responsive, timely, and cost-effective monitoring of ecological processes. Here, we adopted a lightweight quadcopter as an aerial survey tool and object-based image analysis (OBIA) workflow to demonstrate the strength of such methods in producing very high spatial resolution maps of sensitive marine habitats. Therefore, three different coastal environments were mapped using the autonomous flight capability of a lightweight UAV equipped with a fully stabilized consumer-grade RGB digital camera. In particular we investigated a Posidonia oceanica seagrass meadow, a rocky coast with nurseries for juvenile fish, and two sandy areas showing biogenic reefs of Sabelleria alveolata. We adopted, for the first time, UAV-based raster thematic maps of these key coastal habitats, produced after OBIA classification, as a new method for fine-scale, low-cost, and time saving characterization of sensitive marine environments which may lead to a more effective and efficient monitoring and management of natural resource

Trying to break new ground in aerial archaeology

Aerial reconnaissance continues to be a vital tool for landscape-oriented archaeological research. Although a variety of remote sensing platforms operate within the earth’s atmosphere, the majority of aerial archaeological information is still derived from oblique photographs collected during observer-directed reconnaissance flights, a prospection approach which has dominated archaeological aerial survey for the past century. The resulting highly biased imagery is generally catalogued in sub-optimal (spatial) databases, if at all, after which a small selection of images is orthorectified and interpreted. For decades, this has been the standard approach. Although many innovations, including digital cameras, inertial units, photogrammetry and computer vision algorithms, geographic(al) information systems and computing power have emerged, their potential has not yet been fully exploited in order to re-invent and highly optimise this crucial branch of landscape archaeology. The authors argue that a fundamental change is needed to transform the way aerial archaeologists approach data acquisition and image processing. By addressing the very core concepts of geographically biased aerial archaeological photographs and proposing new imaging technologies, data handling methods and processing procedures, this paper gives a personal opinion on how the methodological components of aerial archaeology, and specifically aerial archaeological photography, should evolve during the next decade if developing a more reliable record of our past is to be our central aim. In this paper, a possible practical solution is illustrated by outlining a turnkey aerial prospection system for total coverage survey together with a semi-automated back-end pipeline that takes care of photograph correction and image enhancement as well as the management and interpretative mapping of the resulting data products. In this way, the proposed system addresses one of many bias issues in archaeological research: the bias we impart to the visual record as a result of selective coverage. While the total coverage approach outlined here may not altogether eliminate survey bias, it can vastly increase the amount of useful information captured during a single reconnaissance flight while mitigating the discriminating effects of observer-based, on-the-fly target selection. Furthermore, the information contained in this paper should make it clear that with current technology it is feasible to do so. This can radically alter the basis for aerial prospection and move landscape archaeology forward, beyond the inherently biased patterns that are currently created by airborne archaeological prospection

Impervious surface estimation using remote sensing images and gis : how accurate is the estimate at subdivision level?

Impervious surface has long been accepted as a key environmental indicator linking development to its impacts on water. Many have suggested that there is a direct correlation between degree of imperviousness and both quantity and quality of water. Quantifying the amount of impervious surface, however, remains difficult and tedious especially in urban areas. Lately more efforts have been focused on the application of remote sensing and GIS technologies in assessing the amount of impervious surface and many have reported promising results at various pixel levels. This paper discusses an attempt at estimating the amount of impervious surface at subdivision level using remote sensing images and GIS techniques. Using Landsat ETM+ images and GIS techniques, a regression tree model is first developed for estimating pixel imperviousness. GIS zonal functions are then used to estimate the amount of impervious surface for a sample of subdivisions. The accuracy of the model is evaluated by comparing the model-predicted imperviousness to digitized imperviousness at the subdivision level. The paper then concludes with a discussion on the convenience and accuracy of using the method to estimate imperviousness for large areas

Discriminating small wooded elements in rural landscape from aerial photography: a hybrid pixel/object-based analysis approach

While small, fragmented wooded elements do not represent a large surface area in agricultural landscape, their role in the sustainability of ecological processes is recognized widely. Unfortunately, landscape ecology studies suffer from the lack of methods for automatic detection of these elements. We propose a hybrid approach using both aerial photographs and ancillary data of coarser resolution to automatically discriminate small wooded elements. First, a spectral and textural analysis is performed to identify all the planted-tree areas in the digital photograph. Secondly, an object-orientated spatial analysis using the two data sources and including a multi-resolution segmentation is applied to distinguish between large and small woods, copses, hedgerows and scattered trees. The results show the usefulness of the hybrid approach and the prospects for future ecological applications

Legal Challenges and Market Rewards to the Use and Acceptance of Remote Sensing and Digital Information as Evidence

Bakgrund I den nutida forskningen är det essentiellt att företag tar hänsyn till medarbetarnas motivation så att de gynnas av det arbetssätt som tillämpas. En arbetsmetod som blivit allt vanligare är konceptet Lean som ursprungligen kommer från den japanska bilindustrin. Lean har idag utvecklats till ett allmängiltigt koncept som tillämpas i flertalet branscher världen över. Trots att konceptet innebär flertalet positiva aspekter har det fått utstå stark kritik när det kommer till de mänskliga aspekterna och forskare har ställt sig frågan om Lean är "Mean". Kritiken härleds främst till medarbetares arbetsmiljö i form av stress och brist på variation, självbestämmande, hälsa och välmående. Få empiriska studier har däremot genomförts som undersöker konsekvenserna som Lean får på medarbetares upplevda motivation. Syfte Vårt syfte är att undersöka och öka förståelsen för medarbetares upplevelser av motivationen i företag som tillämpar Lean. Vidare har studien för avsikt att utreda om det föreligger en paradox mellan Lean och vad som motiverar medarbetare på en arbetsplats. Metod Studien har utgått från en kvalitativ metod via intervjuer. För att göra en djupare undersökning och analysera hur vårt fenomen, motivation, upplevs i en kontext med Lean tillämpade vi Små-N-studier. Vi har även haft en iterativ forskningsansats som förenat den deduktiva och induktiva ansatsen där studien pendlat mellan teorier och empiriska observationer fram tills det slutgiltiga resultatet. Slutsatser Utefter medarbetarnas upplevelser har vi identifierat att det inte föreligger någon paradox mellan Lean och motivation eftersom övervägande antal medarbetare upplevde att de är motiverade även om företaget tillämpar Lean. Dock har studien kunnat urskilja både stödjande och motverkande faktorer när det kommer till medarbetarnas upplevda arbetsförhållanden som i sin tur inverkar på motivationen. De motverkande faktorerna menar vi främst beror på att arbetsförhållandena i somliga fall innehåller höga prestationskrav, målstyrning samt standardiseringar. Vidare upplevs motivationen överlag som mer positiv när företagen använder en mjukare form av Lean där samtliga medlemmars intressen beaktas.Background In modern research, it is essential that companies consider employees’ motivation so that they benefit from the applied practices. A working method that has become increasingly common is the concept Lean, which has its origin in the Japanese automotive industry. Today, Lean has evolved into a universal concept that is applied in many industries worldwide. Although the concept involves numerous positive aspects it has endured strong criticism when it comes to the human aspects and researchers have raised the question if Lean is "Mean". Criticism is derived primarily to employees’ working conditions in terms of stress and lack, variation, autonomy, health and wellbeing. However, few empirical studies have been carried out that examines the impact that Lean has on employees’ experienced motivation. Aim The aim is to increase the understanding of employees’ experienced motivation in companies that practice Lean. Further on the study has the intention to investigate if there is a paradox between Lean and what motivates employees on work. Methodology The study has been conducted through a qualitative method by interviews and to be able to do a deeper examination and analyze how our phenomenon, motivation, is experienced in a Lean context we applied small-N-studies. Our strategy has been iterative, combining both a deductive and inductive approach, where the study has varied between theories and empirical observations until the final result. Conclusions We have identified that there is no paradox between Lean and motivation since the majority of employees’ experienced that they are motivated even though the company practice Lean. Nevertheless the study shows that there are both supportive and counteractive factors when it comes to the employees’ experienced working conditions. The counteractive factors consists foremost of high performance standards, goal steering and standardizations, and have in some cases a negative influence on the working conditions. Furthermore the experienced motivation is more positive overall when the companies use a softer form of Lean where all the members’ interests are taken into account

Guidance for benthic habitat mapping: an aerial photographic approach

This document, Guidance for Benthic Habitat Mapping: An Aerial Photographic Approach, describes proven technology that can be applied in an operational manner by state-level scientists and resource managers. This information is based on the experience gained by NOAA Coastal Services Center staff and state-level cooperators in the production of a series of benthic habitat data sets in Delaware, Florida, Maine, Massachusetts, New York, Rhode Island, the Virgin Islands, and Washington, as well as during Center-sponsored workshops on coral remote sensing and seagrass and aquatic habitat assessment. (PDF contains 39 pages) The original benthic habitat document, NOAA Coastal Change Analysis Program (C-CAP): Guidance for Regional Implementation (Dobson et al.), was published by the Department of Commerce in 1995. That document summarized procedures that were to be used by scientists throughout the United States to develop consistent and reliable coastal land cover and benthic habitat information. Advances in technology and new methodologies for generating these data created the need for this updated report, which builds upon the foundation of its predecessor

Evaluation of Skylab (EREP) data for forest and rangeland surveys

The author has identified the following significant results. Four widely separated sites (near Augusta, Georgia; Lead, South Dakota; Manitou, Colorado; and Redding, California) were selected as typical sites for forest inventory, forest stress, rangeland inventory, and atmospheric and solar measurements, respectively. Results indicated that Skylab S190B color photography is good for classification of Level 1 forest and nonforest land (90 to 95 percent correct) and could be used as a data base for sampling by small and medium scale photography using regression techniques. The accuracy of Level 2 forest and nonforest classes, however, varied from fair to poor. Results of plant community classification tests indicate that both visual and microdensitometric techniques can separate deciduous, conifirous, and grassland classes to the region level in the Ecoclass hierarchical classification system. There was no consistency in classifying tree categories at the series level by visual photointerpretation. The relationship between ground measurements and large scale photo measurements of foliar cover had a correlation coefficient of greater than 0.75. Some of the relationships, however, were site dependent

Pilot investigation of remote sensing for intertidal oyster mapping in coastal South Carolina: a methods comparison

South Carolina’s oyster reefs are a major component of the coastal landscape. Eastern oysters Crassostrea virginica are an important economic resource to the state and serve many essential functions in the environment, including water filtration, creek bank stabilization and habitat for other plants and animals. Effective conservation and management of oyster reefs is dependent on an understanding of their abundance, distribution, condition, and change over time. In South Carolina, over 95% of the state’s oyster habitat is intertidal. The current intertidal oyster reef database for South Carolina was developed by field assessment over several years. This database was completed in the early 1980s and is in need of an update to assess resource/habitat status and trends across the state. Anthropogenic factors such as coastal development and associated waterway usage (e.g., boat wakes) are suspected of significantly altering the extent and health of the state’s oyster resources. In 2002 the NOAA Coastal Services Center’s (Center) Coastal Remote Sensing Program (CRS) worked with the Marine Resources Division of the South Carolina Department of Natural Resources (SCDNR) to develop methods for mapping intertidal oyster reefs along the South Carolina coast using remote sensing technology. The objective of this project was to provide SCDNR with potential methodologies and approaches for assessing oyster resources in a more efficiently than could be accomplished through field digitizing. The project focused on the utility of high-resolution aerial imagery and on documenting the effectiveness of various analysis techniques for accomplishing the update. (PDF contains 32 pages