Book of Abstracts 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization

In this edition, the two events will run together as a single conference, highlighting the strong connection with the Taylor & Francis journals: Computer Methods in Biomechanics and Biomedical Engineering (John Middleton and Christopher Jacobs, Eds.) and Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization (JoãoManuel R.S. Tavares, Ed.). The conference has become a major international meeting on computational biomechanics, imaging andvisualization. In this edition, the main program includes 212 presentations. In addition, sixteen renowned researchers will give plenary keynotes, addressing current challenges in computational biomechanics and biomedical imaging. In Lisbon, for the first time, a session dedicated to award the winner of the Best Paper in CMBBE Journal will take place. We believe that CMBBE2018 will have a strong impact on the development of computational biomechanics and biomedical imaging and visualization, identifying emerging areas of research and promoting the collaboration and networking between participants. This impact is evidenced through the well-known research groups, commercial companies and scientific organizations, who continue to support and sponsor the CMBBE meeting series. In fact, the conference is enriched with five workshops on specific scientific topics and commercial software.info:eu-repo/semantics/draf

In vivo morphometric and mechanical characterization of trabecular bone from high resolution magnetic resonance imaging

La osteoporosis es una enfermedad ósea que se manifiesta con una menor densidad ósea y el deterioro de la arquitectura del hueso esponjoso. Ambos factores aumentan la fragilidad ósea y el riesgo de sufrir fracturas óseas, especialmente en mujeres, donde existe una alta prevalencia. El diagnóstico actual de la osteoporosis se basa en la cuantificación de la densidad mineral ósea (DMO) mediante la técnica de absorciometría dual de rayos X (DXA). Sin embargo, la DMO no puede considerarse de manera aislada para la evaluación del riesgo de fractura o los efectos terapéuticos. Existen otros factores, tales como la disposición microestructural de las trabéculas y sus características que es necesario tener en cuenta para determinar la calidad del hueso y evaluar de manera más directa el riesgo de fractura. Los avances técnicos de las modalidades de imagen médica, como la tomografía computarizada multidetector (MDCT), la tomografía computarizada periférica cuantitativa (HR-pQCT) y la resonancia magnética (RM) han permitido la adquisición in vivo con resoluciones espaciales elevadas. La estructura del hueso trabecular puede observarse con un buen detalle empleando estas técnicas. En particular, el uso de los equipos de RM de 3 Teslas (T) ha permitido la adquisición con resoluciones espaciales muy altas. Además, el buen contraste entre hueso y médula que proporcionan las imágenes de RM, así como la utilización de radiaciones no ionizantes sitúan a la RM como una técnica muy adecuada para la caracterización in vivo de hueso trabecular en la enfermedad de la osteoporosis. En la presente tesis se proponen nuevos desarrollos metodológicos para la caracterización morfométrica y mecánica del hueso trabecular en tres dimensiones (3D) y se aplican a adquisiciones de RM de 3T con alta resolución espacial. El análisis morfométrico está compuesto por diferentes algoritmos diseñados para cuantificar la morfología, la complejidad, la topología y los parámetros de anisotropía del tejido trabecular. En cuanto a la caracterización mecánica, se desarrollaron nuevos métodos que permiten la simulación automatizada de la estructura del hueso trabecular en condiciones de compresión y el cálculo del módulo de elasticidad. La metodología desarrollada se ha aplicado a una población de sujetos sanos con el fin de obtener los valores de normalidad del hueso esponjoso. Los algoritmos se han aplicado también a una población de pacientes con osteoporosis con el fin de cuantificar las variaciones de los parámetros en la enfermedad y evaluar las diferencias con los resultados obtenidos en un grupo de sujetos sanos con edad similar.Los desarrollos metodológicos propuestos y las aplicaciones clínicas proporcionan resultados satisfactorios, presentando los parámetros una alta sensibilidad a variaciones de la estructura trabecular principalmente influenciadas por el sexo y el estado de enfermedad. Por otra parte, los métodos presentan elevada reproducibilidad y precisión en la cuantificación de los valores morfométricos y mecánicos. Estos resultados refuerzan el uso de los parámetros presentados como posibles biomarcadores de imagen en la enfermedad de la osteoporosis.Alberich Bayarri, Á. (2010). In vivo morphometric and mechanical characterization of trabecular bone from high resolution magnetic resonance imaging [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8981Palanci

Multi-scale imaging and modelling of bone

The multi-level organization of bone facilitates the exploitation of in-vivo micro-scale information which is currently lacking for clinical applications. The three sub-projects presented in this thesis investigate the human skeletal system at multiple scales using magnetic resonance imaging (MRI) with the aim of providing new techniques for extracting finer scale information in-vivo. At the whole organ level, human knee joint kinematics was studied using a combined MRI strategy. This new strategy enables the in-vivo investigation of tibiofemoral locomotion under body weight-bearing conditions by modelling the knee flexion angle as a function of the femur and tibia cartilage surfaces in contact. The resultant "contact" trajectory may potentially be used to understand the mechanical cause of cartilage degeneration and as a biomarker to detect abnormalities in the lower limb. At the molecular level, in-vivo MR diffusion tensor imaging (DTI) has been performed for the first time in the human tibia epiphysis. By tracking the water molecules inside the red marrow, the organization of trabecular bone network may be understood as the streamlines formed by anisotropic diffusion trajectories. This sub-project aims to understand the organization of trabecular bone networks non-invasively, which is usually performed ex-vivo through biopsies. The feasibility and reproducibility of DTI is studied. Finally, a new MR imaging protocol named multi-directional sub-pixel enhancement (mSPENT) is proposed and developed to quantify the trabecular bone structural arrangement at the meso-scale. By modulating a dephasing gradient to manipulate the underlying spin system inside each voxel, the resulting mSPENT image contrast varies with gradient at different directions based on the magnetization at the corresponding voxel. A tensor-based method is further developed to model this contrast change, leading to a localized quantification of tissue structural orientation beyond the conventional MR imaging resolution

Mapping Trabecular Bone Fabric Tensor by in Vivo Magnetic Resonance Imaging

The mechanical competence of bone depends upon its quantity, structural arrangement, and chemical composition. Assessment of these factors is important for the evaluation of bone integrity, particularly as the skeleton remodels according to external (e.g. mechanical loading) and internal (e.g. hormonal changes) stimuli. Micro magnetic resonance imaging (µMRI) has emerged as a non-invasive and non-ionizing method well-suited for the repeated measurements necessary for monitoring changes in bone integrity. However, in vivo image-based directional dependence of trabecular bone (TB) has not been linked to mechanical competence or fracture risk despite the existence of convincing ex vivo evidence. The objective of this dissertation research was to develop a means of capturing the directional dependence of TB by assessing a fabric tensor on the basis of in vivo µMRI. To accomplish this objective, a novel approach for calculating the TB fabric tensor based on the spatial autocorrelation function was developed and evaluated in the presence of common limitations to in vivo µMRI. Comparisons were made to the standard technique of mean-intercept-length (MIL). Relative to MIL, ACF was identified as computationally faster by over an order of magnitude and more robust within the range of the resolutions and SNRs achievable in vivo. The potential for improved sensitivity afforded by isotropic resolution was also investigated in an improved µMR imaging protocol at 3T. Measures of reproducibility and reliability indicate the potential of images with isotropic resolution to provide enhanced sensitivity to orientation-dependent measures of TB, however overall reproducibility suffered from the sacrifice in SNR. Finally, the image-derived TB fabric tensor was validated through its relationship with TB mechanical competence in specimen and in vivo µMR images. The inclusion of trabecular bone fabric measures significantly improved the bone volume fraction-based prediction of elastic constants calculated by micro-finite element analysis. This research established a method for detecting TB fabric tensor in vivo and identified the directional dependence of TB as an important determinant of TB mechanical competence

Design and testing of additively manufactured lattice structures for musculoskeletal applications

Additive manufacturing (AM) methods present a new frontier in engineering, allowing the fabrication of porous lattice structures with tailored mechanical properties. AM structures can be made using bio-inert metals, creating controlled stiffness biomaterials. As bone formation is strain dependent, these AM biomaterials can be used in implants to optimise the strain in surrounding trabecular bone for peak bone formation. However, the behaviour of AM lattices varies and is subject to manufacturing constraints. The aim of this PhD was to investigate the mechanical behaviour of AM lattices, and maximise the clinical benefits of AM for musculoskeletal applications. Lattice architecture was shown to affect the anisotropy of an AM lattice biomaterial, increasing the stiffness in directions not often tested in the literature. The mechanical and morphological properties of individual struts within powder bed fusion (PBF) lattices were also shown to vary depending on the orientation of the struts to the build direction. The ultimate tensile strength of titanium alloy (Ti6Al4V) struts more than doubled when built at a low angle versus perpendicular to the build platform, and other properties were substantially lower than for the bulk material. Geometric imperfections were found for struts built at low angles. As such, a low stiffness modified stochastic lattice was designed and tested which avoided the problems found with struts built at low angles. The resulting lattice had improved stiffness isotropy and could be used for musculoskeletal applications, tuned to match the mechanical properties in local trabecular bone and enhancing bone formation.Open Acces

Development of algorithms and methods for three-dimensional image analysis and biomedical applications

2010/2011Tomographic imaging is both the science and the tool to explore the internal structure of objects. The mission is to use images to characterize the static and/or dynamic properties of the imaged object in order to further integrate these properties into principles, laws or theories. Among the recent trends in tomographic imaging, three- dimensional (3D) methods are gaining preference and there is the quest for overcoming the bare qualitative observation towards the extraction of quantitative parameters directly from the acquired images. To this aim, Computed Tomography (CT) and Magnetic Resonance Imaging (MRI), as well as the related micro-scale techniques (μ-CT and μ-MRI), are promising tools for all the fields of science in which non-destructive tests are required. In order to support the interpretation of the images produced by these techniques, there is a growing demand of reliable image analysis methods for the specific 3D domain. The aim of this thesis is to present approaches for effective and efficient three-dimensional image analysis with special emphasis on porous media analysis. State-of-the art as well as innovative tools are included in a special software and hardware solution named Pore3D, developed in a collaboration with the Italian 3rd generation synchrotron laboratory Elettra (Basovizza - Trieste, Italy). Algorithms and methods for the characterization of different kinds of porous media are described. The key steps of image segmentation and skeletonization of the segmented pore space are also discussed in depth. Three different clinical and biomedical applications of quantitative analysis of tomographic images are presented. The reported applications have in common the characterization of the micro-architecture of trabecular bone. The trabecular (or cancellous) bone is a 3D mesh- work of bony trabeculae and void spaces containing the bone marrow. It can then be thought of as a porous medium with an interconnected porous space. To be more specific, the first application aims at characterizing a structure (a tissue engineering scaffold) that has to mimic the architecture of trabecular bone. The relevant features of porosity, pore- and throat-size distributions, connectivity and structural anisotropy indexes are automatically extracted from μ-CT images. The second application is based on ex vivo experiments carried out on femurs and lumbar spines of mice affected by microgravity conditions. Wild type and transgenic mice were hosted in the International Space Station (ISS) for 3 months and the observed bone loss due to the near-zero gravity was quantified by means of synchrotron radiation μ-CT image analysis. Finally, the results of an in vivo study on the risk of fracture in osteoporotic subjects is reported. The study is based on texture analysis of high resolution clinical magnetic resonance (MR) images.XXIV Ciclo198

Analysis, Segmentation and Prediction of Knee Cartilage using Statistical Shape Models

Osteoarthritis (OA) of the knee is one of the leading causes of chronic disability (along with the hip). Due to rising healthcare costs associated with OA, it is important to fully understand the disease and how it progresses in the knee. One symptom of knee OA is the degeneration of cartilage in the articulating knee. The cartilage pad plays a major role in painting the biomechanical picture of the knee. This work attempts to quantify the cartilage thickness of healthy male and female knees using statistical shape models (SSMs) for a deep knee bend activity. Additionally, novel cartilage segmentation from magnetic resonance imaging (MRI) and estimation algorithms from computer tomography (CT) or x-rays are proposed to facilitate the efficient development and accurate analysis of future treatments related to the knee. Cartilage morphology results suggest distinct patterns of wear in varus, valgus, and neutral degenerative knees, and examination of contact regions during the deep knee bend activity further emphasizes these patterns. Segmentation results were achieved that were comparable if not of higher quality than existing state-of-the-art techniques for both femoral and tibial cartilage. Likewise, using the point correspondence properties of SSMs, estimation of articulating cartilage was effective in healthy and degenerative knees. In conclusion, this work provides novel, clinically relevant morphological data to compute segmentation and estimate new data in such a way to potentially contribute to improving results and efficiency in evaluation of the femorotibial cartilage layer