31 research outputs found
Robust THP Transceiver Designs for Multiuser MIMO Downlink with Imperfect CSIT
In this paper, we present robust joint non-linear transceiver designs for
multiuser multiple-input multiple-output (MIMO) downlink in the presence of
imperfections in the channel state information at the transmitter (CSIT). The
base station (BS) is equipped with multiple transmit antennas, and each user
terminal is equipped with one or more receive antennas. The BS employs
Tomlinson-Harashima precoding (THP) for inter-user interference
pre-cancellation at the transmitter. We consider robust transceiver designs
that jointly optimize the transmit THP filters and receive filter for two
models of CSIT errors. The first model is a stochastic error (SE) model, where
the CSIT error is Gaussian-distributed. This model is applicable when the CSIT
error is dominated by channel estimation error. In this case, the proposed
robust transceiver design seeks to minimize a stochastic function of the sum
mean square error (SMSE) under a constraint on the total BS transmit power. We
propose an iterative algorithm to solve this problem. The other model we
consider is a norm-bounded error (NBE) model, where the CSIT error can be
specified by an uncertainty set. This model is applicable when the CSIT error
is dominated by quantization errors. In this case, we consider a worst-case
design. For this model, we consider robust i) minimum SMSE, ii)
MSE-constrained, and iii) MSE-balancing transceiver designs. We propose
iterative algorithms to solve these problems, wherein each iteration involves a
pair of semi-definite programs (SDP). Further, we consider an extension of the
proposed algorithm to the case with per-antenna power constraints.Comment: Accepted for publication in EURASIP Journal on Advances in Signal
Processing: Special Issue on Multiuser MIMO Transmission with Limited
Feedback, Cooperation, and Coordinatio
Robust Beamforming for Cognitive and Cooperative Wireless Networks
Ph.DDOCTOR OF PHILOSOPH
Rate-splitting multiple access for non-terrestrial communication and sensing networks
Rate-splitting multiple access (RSMA) has emerged as a powerful and flexible
non-orthogonal transmission, multiple access (MA) and interference management
scheme for future wireless networks. This thesis is concerned with the application of
RSMA to non-terrestrial communication and sensing networks. Various scenarios
and algorithms are presented and evaluated.
First, we investigate a novel multigroup/multibeam multicast beamforming strategy
based on RSMA in both terrestrial multigroup multicast and multibeam satellite
systems with imperfect channel state information at the transmitter (CSIT). The
max-min fairness (MMF)-degree of freedom (DoF) of RSMA is derived and shown
to provide gains compared with the conventional strategy. The MMF beamforming
optimization problem is formulated and solved using the weighted minimum mean
square error (WMMSE) algorithm. Physical layer design and link-level simulations
are also investigated. RSMA is demonstrated to be very promising for multigroup
multicast and multibeam satellite systems taking into account CSIT uncertainty
and practical challenges in multibeam satellite systems.
Next, we extend the scope of research from multibeam satellite systems to satellite-
terrestrial integrated networks (STINs). Two RSMA-based STIN schemes are
investigated, namely the coordinated scheme relying on CSI sharing and the co-
operative scheme relying on CSI and data sharing. Joint beamforming algorithms
are proposed based on the successive convex approximation (SCA) approach to
optimize the beamforming to achieve MMF amongst all users. The effectiveness and
robustness of the proposed RSMA schemes for STINs are demonstrated.
Finally, we consider RSMA for a multi-antenna integrated sensing and communications (ISAC) system, which simultaneously serves multiple communication users
and estimates the parameters of a moving target. Simulation results demonstrate
that RSMA is beneficial to both terrestrial and multibeam satellite ISAC systems by
evaluating the trade-off between communication MMF rate and sensing Cramer-Rao
bound (CRB).Open Acces
MIMO Systems
In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity
Novel transmission and beamforming strategies for multiuser MIMO with various CSIT types
In multiuser multi-antenna wireless systems, the transmission and beamforming strategies that achieve the sum rate capacity depend critically on the acquisition of perfect Channel State Information at the Transmitter (CSIT).
Accordingly, a high-rate low-latency feedback link between the receiver and the transmitter is required to keep the latter accurately and instantaneously informed about the CSI.
In realistic wireless systems, however, only imperfect CSIT is achievable due to pilot contamination, estimation error, limited feedback and delay, etc.
As an intermediate solution, this thesis investigates novel transmission strategies suitable for various imperfect CSIT scenarios and the associated beamforming techniques to optimise the rate performance.
First, we consider a two-user Multiple-Input-Single-Output (MISO) Broadcast Channel (BC) under statistical and delayed CSIT.
We mainly focus on linear beamforming and power allocation designs for ergodic sum rate maximisation.
The proposed designs enable higher sum rate than the conventional designs.
Interestingly, we propose a novel transmission framework which makes better use of statistical and delayed CSIT and smoothly bridges between statistical CSIT-based strategies and delayed CSIT-based strategies.
Second, we consider a multiuser massive MIMO system under partial and statistical CSIT.
In order to tackle multiuser interference incurred by partial CSIT, a Rate-Splitting (RS) transmission strategy has been proposed recently.
We generalise the idea of RS into the large-scale array.
By further exploiting statistical CSIT, we propose a novel framework Hierarchical-Rate-Splitting that is particularly suited to massive MIMO systems.
Third, we consider a multiuser Millimetre Wave (mmWave) system with hybrid analog/digital precoding under statistical and quantised CSIT.
We leverage statistical CSIT to design digital precoder for interference mitigation while all feedback overhead is reserved for precise analog beamforming.
For very limited feedback and/or very sparse channels, the proposed precoding scheme yields higher sum rate than the conventional precoding schemes under a fixed total feedback constraint.
Moreover, a RS transmission strategy is introduced to further tackle the multiuser interference, enabling remarkable saving in feedback overhead compared with conventional transmission strategies.
Finally, we investigate the downlink hybrid precoding for physical layer multicasting with a limited number of RF chains.
We propose a low complexity algorithm to compute the analog precoder that achieves near-optimal max-min performance.
Moreover, we derive a simple condition under which the hybrid precoding driven by a limited number of RF chains incurs no loss of optimality with respect to the fully digital precoding case.Open Acces
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin