Robust Partitioned Scheduling for Static-Priority Real-Time Multiprocessor Systems with Shared Resources

International audienceWe focus on the partitioned scheduling of sporadic real-time tasks with constrained deadlines. The scheduling policy on each processor is static-priority. The considered tasks are not independent and the consistency of these shared data is ensured by a multiprocessor synchronization protocol. Considering these assumptions, we propose a partitioned scheduling algorithm which tends to maximize the robustness of the tasks to the Worst Case Execution Time (WCET) overruns faults. We describe the context of the problem and we outline our solution based on simulated annealing

ATMP: An Adaptive Tolerance-based Mixed-criticality Protocol for Multi-core Systems

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted ncomponent of this work in other works.The challenge of mixed-criticality scheduling is to keep tasks of higher criticality running in case of resource shortages caused by faults. Traditionally, mixedcriticality scheduling has focused on methods to handle faults where tasks overrun their optimistic worst-case execution time (WCET) estimate. In this paper we present the Adaptive Tolerance based Mixed-criticality Protocol (ATMP), which generalises the concept of mixed-criticality scheduling to handle also faults of other nature, like failure of cores in a multi-core system. ATMP is an adaptation method triggered by resource shortage at runtime. The first step of ATMP is to re-partition the task to the available cores and the second step is to optimise the utility at each core using the tolerance-based real-time computing model (TRTCM). The evaluation shows that the utility optimisation of ATMP can achieve a smoother degradation of service compared to just abandoning tasks

Run-time parallelization and scheduling of loops

The class of problems that can be effectively compiled by parallelizing compilers is discussed. This is accomplished with the doconsider construct which would allow these compilers to parallelize many problems in which substantial loop-level parallelism is available but cannot be detected by standard compile-time analysis. We describe and experimentally analyze mechanisms used to parallelize the work required for these types of loops. In each of these methods, a new loop structure is produced by modifying the loop to be parallelized. We also present the rules by which these loop transformations may be automated in order that they be included in language compilers. The main application area of the research involves problems in scientific computations and engineering. The workload used in our experiment includes a mixture of real problems as well as synthetically generated inputs. From our extensive tests on the Encore Multimax/320, we have reached the conclusion that for the types of workloads we have investigated, self-execution almost always performs better than pre-scheduling. Further, the improvement in performance that accrues as a result of global topological sorting of indices as opposed to the less expensive local sorting, is not very significant in the case of self-execution

Improvement of schedulability bound by task splitting in partitioning scheduling

International audienceWe focus on the class of static-priority partitioning scheduling algorithm on multiprocessor. We are interested in improving the schedulability of these algorithms by splitting the tasks which cannot be successfully allocated on processors

Semi-Partitioned Scheduling of Dynamic Real-Time Workload: A Practical Approach Based on Analysis-Driven Load Balancing

Recent work showed that semi-partitioned scheduling can achieve near-optimal schedulability performance, is simpler to implement compared to global scheduling, and less heavier in terms of runtime overhead, thus resulting in an excellent choice for implementing real-world systems. However, semi-partitioned scheduling typically leverages an off-line design to allocate tasks across the available processors, which requires a-priori knowledge of the workload. Conversely, several simple global schedulers, as global earliest-deadline first (G-EDF), can transparently support dynamic workload without requiring a task-allocation phase. Nonetheless, such schedulers exhibit poor worst-case performance. This work proposes a semi-partitioned approach to efficiently schedule dynamic real-time workload on a multiprocessor system. A linear-time approximation for the C=D splitting scheme under partitioned EDF scheduling is first presented to reduce the complexity of online scheduling decisions. Then, a load-balancing algorithm is proposed for admitting new real-time workload in the system with limited workload re-allocation. A large-scale experimental study shows that the linear-time approximation has a very limited utilization loss compared to the exact technique and the proposed approach achieves very high schedulability performance, with a consistent improvement on G-EDF and pure partitioned EDF scheduling

Semi-Partitioned Scheduling of Dynamic Real-Time Workload: A Practical Approach Based on Analysis-Driven Load Balancing

Recent work showed that semi-partitioned scheduling can achieve near-optimal schedulability performance, is simpler to implement compared to global scheduling, and less heavier in terms of runtime overhead, thus resulting in an excellent choice for implementing real-world systems. However, semi-partitioned scheduling typically leverages an off-line design to allocate tasks across the available processors, which requires a-priori knowledge of the workload. Conversely, several simple global schedulers, as global earliest-deadline first (G-EDF), can transparently support dynamic workload without requiring a task-allocation phase. Nonetheless, such schedulers exhibit poor worst-case performance. This work proposes a semi-partitioned approach to efficiently schedule dynamic real-time workload on a multiprocessor system. A linear-time approximation for the C=D splitting scheme under partitioned EDF scheduling is first presented to reduce the complexity of online scheduling decisions. Then, a load-balancing algorithm is proposed for admitting new real-time workload in the system with limited workload re-allocation. A large-scale experimental study shows that the linear-time approximation has a very limited utilization loss compared to the exact technique and the proposed approach achieves very high schedulability performance, with a consistent improvement on G-EDF and pure partitioned EDF scheduling

Adaptive partitioning of real-time tasks on multiple processors

This paper presents a new algorithm for scheduling real-time tasks on multiprocessor/multicore systems. This new algorithm is based on combining EDF scheduling with a migration strategy that moves tasks only when needed. It has been evaluated through an extensive set of simulations that showed good performance when compared with global or partitioned EDF: a worst-case utilisation bound similar to partitioned EDF for hard real-time tasks, and a tardiness bound similar to global EDF for soft real-time tasks. Therefore, the proposed scheduler is effective for dealing with both soft and hard real-time workloads

Adaptive Mid-term and Short-term Scheduling of Mixed-criticality Systems

A mixed-criticality real-time system is a real-time system having multiple tasks classified according to their criticality. Research on mixed-criticality systems started to provide an effective and cost efficient a priori verification process for safety critical systems. The higher the criticality of a task within a system and the more the system should guarantee the required level of service for it. However, such model poses new challenges with respect to scheduling and fault tolerance within real-time systems. Currently, mixed-criticality scheduling protocols severely degrade lower criticality tasks in case of resource shortage to provide the required level of service for the most critical ones. The actual research challenge in this field is to devise robust scheduling protocols to minimise the impact on less critical tasks. This dissertation introduces two approaches, one short-term and the other medium-term, to appropriately allocate computing resources to tasks within mixed-criticality systems both on uniprocessor and multiprocessor systems. The short-term strategy consists of a protocol named Lazy Bailout Protocol (LBP) to schedule mixed-criticality task sets on single core architectures. Scheduling decisions are made about tasks that are active in the ready queue and that have to be dispatched to the CPU. LBP minimises the service degradation for lower criticality tasks by providing to them a background execution during the system idle time. After, I refined LBP with variants that aim to further increase the service level provided for lower criticality tasks. However, this is achieved at an increased cost of either system offline analysis or complexity at runtime. The second approach, named Adaptive Tolerance-based Mixed-criticality Protocol (ATMP), decides at runtime which task has to be allocated to the active cores according to the available resources. ATMP permits to optimise the overall system utility by tuning the system workload in case of shortage of computing capacity at runtime. Unlike the majority of current mixed-criticality approaches, ATMP allows to smoothly degrade also higher criticality tasks to keep allocated lower criticality ones

A Survey of Research into Mixed Criticality Systems

This survey covers research into mixed criticality systems that has been published since Vestal’s seminal paper in 2007, up until the end of 2016. The survey is organised along the lines of the major research areas within this topic. These include single processor analysis (including fixed priority and EDF scheduling, shared resources and static and synchronous scheduling), multiprocessor analysis, realistic models, and systems issues. The survey also explores the relationship between research into mixed criticality systems and other topics such as hard and soft time constraints, fault tolerant scheduling, hierarchical scheduling, cyber physical systems, probabilistic real-time systems, and industrial safety standards