Analysis of clock tree implementation on ASIC block QoR

The scope of this project is to develop a base methodology for clock tree synthesis that can improve the base results regarding the clock structure. The analysis of results will be done with a Quality of Results sets of metrics and by analysing the physical structure of the clock. The analysis has been performed on three blocks with different physical characteristics to achieve a transversal solution. The initial tests performed have been focused on configuration options of the EDA tool used but were disregarded. The main tests upon this thesis is based are referred to the clock physical structure such as fanout constraints, slew constraints and clock cell selection. One of the main results obtained is the importance of the layout of the block to set up the optimal constraints, limiting the transversal solution approach. It is as well an important point considering the internal algorithms followed by the tool

Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip

The sustained demand for faster, more powerful chips has been met by the availability of chip manufacturing processes allowing for the integration of increasing numbers of computation units onto a single die. The resulting outcome, especially in the embedded domain, has often been called SYSTEM-ON-CHIP (SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC). MPSoC design brings to the foreground a large number of challenges, one of the most prominent of which is the design of the chip interconnection. With a number of on-chip blocks presently ranging in the tens, and quickly approaching the hundreds, the novel issue of how to best provide on-chip communication resources is clearly felt. NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable answer to this design concern. By bringing large-scale networking concepts to the on-chip domain, they guarantee a structured answer to present and future communication requirements. The point-to-point connection and packet switching paradigms they involve are also of great help in minimizing wiring overhead and physical routing issues. However, as with any technology of recent inception, NoC design is still an evolving discipline. Several main areas of interest require deep investigation for NoCs to become viable solutions: • The design of the NoC architecture needs to strike the best tradeoff among performance, features and the tight area and power constraints of the onchip domain. • Simulation and verification infrastructure must be put in place to explore, validate and optimize the NoC performance. • NoCs offer a huge design space, thanks to their extreme customizability in terms of topology and architectural parameters. Design tools are needed to prune this space and pick the best solutions. • Even more so given their global, distributed nature, it is essential to evaluate the physical implementation of NoCs to evaluate their suitability for next-generation designs and their area and power costs. This dissertation performs a design space exploration of network-on-chip architectures, in order to point-out the trade-offs associated with the design of each individual network building blocks and with the design of network topology overall. The design space exploration is preceded by a comparative analysis of state-of-the-art interconnect fabrics with themselves and with early networkon- chip prototypes. The ultimate objective is to point out the key advantages that NoC realizations provide with respect to state-of-the-art communication infrastructures and to point out the challenges that lie ahead in order to make this new interconnect technology come true. Among these latter, technologyrelated challenges are emerging that call for dedicated design techniques at all levels of the design hierarchy. In particular, leakage power dissipation, containment of process variations and of their effects. The achievement of the above objectives was enabled by means of a NoC simulation environment for cycleaccurate modelling and simulation and by means of a back-end facility for the study of NoC physical implementation effects. Overall, all the results provided by this work have been validated on actual silicon layout

Algorithms for Circuit Sizing in VLSI Design

One of the key problems in the physical design of computer chips, also known as integrated circuits, consists of choosing a  physical layout  for the logic gates and memory circuits (registers) on the chip. The layouts have a high influence on the power consumption and area of the chip and the delay of signal paths.  A discrete set of predefined layouts  for each logic function and register type with different physical properties is given by a library. One of the most influential characteristics of a circuit defined by the layout is its size. In this thesis we present new algorithms for the problem of choosing sizes for the circuits and its continuous relaxation,  and  evaluate these in theory and practice. A popular approach is based on Lagrangian relaxation and projected subgradient methods. We show that seemingly heuristic modifications that have been proposed for this approach can be theoretically justified by applying the well-known multiplicative weights algorithm. Subsequently, we propose a new model for the sizing problem as a min-max resource sharing problem. In our context, power consumption and signal delays are represented by resources that are distributed to customers. Under certain assumptions we obtain a polynomial time approximation for the continuous relaxation of the sizing problem that improves over the Lagrangian relaxation based approach. The new resource sharing algorithm has been implemented as part of the BonnTools software package which is developed at the Research Institute for Discrete Mathematics at the University of Bonn in cooperation with IBM. Our experiments on the ISPD 2013 benchmarks and state-of-the-art microprocessor designs provided by IBM illustrate that the new algorithm exhibits more stable convergence behavior compared to a Lagrangian relaxation based algorithm. Additionally, better timing and reduced power consumption was achieved on almost all instances. A subproblem of the new algorithm consists of finding sizes minimizing a weighted sum of power consumption and signal delays. We describe a method that approximates the continuous relaxation of this problem in polynomial time under certain assumptions. For the discrete problem we provide a fully polynomial approximation scheme under certain assumptions on the topology of the chip. Finally, we present a new algorithm for timing-driven optimization of registers. Their sizes and locations on a chip are usually determined during the clock network design phase, and remain mostly unchanged afterwards although the timing criticalities on which they were based can change. Our algorithm permutes register positions and sizes within so-called  clusters  without impairing the clock network such that it can be applied late in a design flow. Under mild assumptions, our algorithm finds an optimal solution which maximizes the worst cluster slack. It is implemented as part of the BonnTools and improves timing of registers on state-of-the-art microprocessor designs by up to 7.8% of design cycle time. </div

Variation and power issues in VLSI clock networks

Clock Distribution Network (CDN) is an important component of any synchronous logic circuit. The function of CDN is to deliver the clock signal to the clock sinks. Clock skew is defined as the difference in the arrival time of the clock signal at the clock sinks. Higher uncertainty in skew (due to PVT variations) degrades circuit performance by decreasing the maximum possible delay between any two sequential elements. Aggressive frequency scaling has also led to high power consumption especially in CDN. This dissertation addresses variation and power issues in the design of current and potential future CDN. The research detailed in this work presents algorithmic techniques for the following problems: (1) Variation tolerance in useful skew design, (2) Link insertion for buffered clock nets, (3) Methodology and algorithms for rotary clocking and (4) Clock mesh optimization for skew-power trade off. For clock trees this dissertation presents techniques to integrate the different aspects of clock tree synthesis (skew scheduling, abstract topology and layout embedding) into one framework- tolerance to variations. This research addresses the issues involved in inserting cross-links in a buffered clock tree and proposes design criteria to avoid the risk of short-circuit current. Rotary clocking is a promising new clocking scheme that consists of unterminated rings formed by differential transmission lines. Rotary clocking achieves reduction in power dissipation clock skew. This dissertation addresses the issues in adopting current CAD methodology to rotary clocks. Alternative methodology and corresponding algorithmic techniques are detailed. Clock mesh is a popular form of CDN used in high performance systems. The problem of simultaneous sizing and placement of mesh buffers in a clock mesh is addressed. The algorithms presented remove the edges from the clock mesh to trade off skew tolerance for low power. For clock trees as well as link insertion, our experiments indicate significant reduction in clock skew due to variations. For clock mesh, experimental results indicate 18.5% reduction in power with 1.3% delay penalty on a average. In summary, this dissertation details methodologies/algorithms that address two critical issues- variation and power dissipation in current and potential future CDN

Doctor of Philosophy

dissertationAsynchronous design has a very promising potential even though it has largely received a cold reception from industry. Part of this reluctance has been due to the necessity of custom design languages and computer aided design (CAD) flows to design, optimize, and validate asynchronous modules and systems. Next generation asynchronous flows should support modern programming languages (e.g., Verilog) and application specific integrated circuits (ASIC) CAD tools. They also have to support multifrequency designs with mixed synchronous (clocked) and asynchronous (unclocked) designs. This work presents a novel relative timing (RT) based methodology for generating multifrequency designs using synchronous CAD tools and flows. Synchronous CAD tools must be constrained for them to work with asynchronous circuits. Identification of these constraints and characterization flow to automatically derive the constraints is presented. The effect of the constraints on the designs and the way they are handled by the synchronous CAD tools are analyzed and reported in this work. The automation of the generation of asynchronous design templates and also the constraint generation is an important problem. Algorithms for automation of reset addition to asynchronous circuits and power and/or performance optimizations applied to the circuits using logical effort are explored thus filling an important hole in the automation flow. Constraints representing cyclic asynchronous circuits as directed acyclic graphs (DAGs) to the CAD tools is necessary for applying synchronous CAD optimizations like sizing, path delay optimizations and also using static timing analysis (STA) on these circuits. A thorough investigation for the requirements of cycle cutting while preserving timing paths is presented with an algorithm to automate the process of generating them. A large set of designs for 4 phase handshake protocol circuit implementations with early and late data validity are characterized for area, power and performance. Benchmark circuits with automated scripts to generate various configurations for better understanding of the designs are proposed and analyzed. Extension to the methodology like addition of scan insertion using automatic test pattern generation (ATPG) tools to add testability of datapath in bundled data asynchronous circuit implementations and timing closure approaches are also described. Energy, area, and performance of purely asynchronous circuits and circuits with mixed synchronous and asynchronous blocks are explored. Results indicate the benefits that can be derived by generating circuits with asynchronous components using this methodology

Design and Optimization for Resilient Energy Efficient Computing

Heutzutage sind moderne elektronische Systeme ein integraler Bestandteil unseres Alltags. Dies wurde unter anderem durch das exponentielle Wachstum der Integrationsdichte von integrierten Schaltkreisen ermöglicht zusammen mit einer Verbesserung der Energieeffizienz, welche in den letzten 50 Jahren stattfand, auch bekannt als Moore‘s Gesetz. In diesem Zusammenhang ist die Nachfrage von energieeffizienten digitalen Schaltkreisen enorm angestiegen, besonders in Anwendungsfeldern wie dem Internet of Things (IoT). Da der Leistungsverbrauch von Schaltkreisen stark mit der Versorgungsspannung verknüpft ist, wurden effiziente Verfahren entwickelt, welche die Versorgungsspannung in den nahen Schwellenspannung-Bereich skalieren, zusammengefasst unter dem Begriff Near-Threshold-Computing (NTC). Mithilfe dieser Verfahren kann eine Erhöhung der Energieeffizienz von Schaltungen um eine ganze Größenordnung ermöglicht werden. Neben der verbesserten Energiebilanz ergeben sich jedoch zahlreiche Herausforderungen was den Schaltungsentwurf angeht. Zum Beispiel führt das Reduzieren der Versorgungsspannung in den nahen Schwellenspannungsbereich zu einer verzehnfachten Erhöhung der Sensibilität der Schaltkreise gegenüber Prozessvariation, Spannungsfluktuationen und Temperaturveränderungen. Die Einflüsse dieser Variationen reduzieren die Zuverlässigkeit von NTC Schaltkreisen und sind ihr größtes Hindernis bezüglich einer umfassenden Nutzung. Traditionelle Ansätze und Methoden aus dem nominalen Spannungsbereich zur Kompensation von Variabilität können nicht effizient angewandt werden, da die starken Performance-Variationen und Sensitivitäten im nahen Schwellenspannungsbereich dessen Kapazitäten übersteigen. Aus diesem Grund sind neue Entwurfsparadigmen und Entwurfsautomatisierungskonzepte für die Anwendung von NTC erforderlich. Das Ziel dieser Arbeit ist die zuvor erwähnten Probleme durch die Bereitstellung von ganzheitlichen Methoden zum Design von NTC Schaltkreisen sowie dessen Entwurfsautomatisierung anzugehen, welche insbesondere auf der Schaltungs- sowie Logik-Ebene angewandt werden. Dabei werden tiefgehende Analysen der Zuverlässigkeit von NTC Systemen miteinbezogen und Optimierungsmethoden werden vorgeschlagen welche die Zuverlässigkeit, Performance und Energieeffizienz verbessern. Die Beiträge dieser Arbeit sind wie folgt: Schaltungssynthese und Timing Closure unter Einbezug von Variationen: Das Einhalten von Anforderungen an das zeitliche Verhalten und Zuverlässigkeit von NTC ist eine anspruchsvolle Aufgabe. Die Auswirkungen von Variabilität kommen bei starken Performance-Schwankungen, welche zu teuren zeitlichen Sicherheitsmargen führen, oder sich in Hold-Time Verstößen ausdrücken, verursacht durch funktionale Störungen, zum Vorschein. Die konventionellen Ansätze beschränken sich dabei alleine auf die Erhöhung von zeitlichen Sicherheitsmargen. Dies ist jedoch sehr ineffizient für NTC, wegen dem starken Ausmaß an Variationen und den erhöhten Leckströmen. In dieser Arbeit wird ein Konzept zur Synthese und Timing Closure von Schaltkreisen unter Variationen vorgestellt, welches sowohl die Sensitivität gegenüber Variationen reduziert als auch die Energieeffizienz, Performance und Zuverlässigkeit verbessert und zugleich den Mehraufwand von Timing Closures [1, 2] verringert. Simulationsergebnisse belegen, dass unser vorgeschlagener Ansatz die Verzögerungszeit um 87% reduziert und die Performance und Energieeffizienz um 25% beziehungsweise 7.4% verbessert, zu Kosten eines erhöhten Flächenbedarfs von 4.8%. Schichtübergreifende Zuverlässigkeits-, Energieeffizienz- und Performance-Optimierung von Datenpfaden: Schichtübergreifende Analyse von Prozessor-Datenpfaden, welche den ganzen Weg spannen vom Kompilierer zum Schaltungsentwurf, kann potenzielle Optimierungsansätze aufzeigen. Ein Datenpfad ist eine Kombination von mehreren funktionalen Einheiten, welche diverse Instruktionen verarbeiten können. Unsere Analyse zeigt, dass die Ausführungszeiten von Instruktionen bei niedrigen Versorgungsspannungen stark variieren, weshalb eine Klassifikation in schnelle und langsame Instruktionen vorgenommen werden kann. Des Weiteren können funktionale Instruktionen als häufig und selten genutzte Instruktionen kategorisiert werden. Diese Arbeit stellt eine Multi-Zyklen-Instruktionen-Methode vor, welche die Energieeffizienz und Belastbarkeit von funktionalen Einheiten erhöhen kann [3]. Zusätzlich stellen wir einen Partitionsalgorithmus vor, welcher ein fein-granulares Power-gating von selten genutzten Einheiten ermöglicht [4] durch Partition von einzelnen funktionalen Einheiten in mehrere kleinere Einheiten. Die vorgeschlagenen Methoden verbessern das zeitliche Schaltungsverhalten signifikant, und begrenzen zugleich die Leckströme beträchtlich, durch Einsatz einer Kombination von Schaltungs-Redesign- und Code-Replacement-Techniken. Simulationsresultate zeigen, dass die entwickelten Methoden die Performance und Energieeffizienz von arithmetisch-logischen Einheiten (ALU) um 19% beziehungsweise 43% verbessern. Des Weiteren kann der Zuwachs in Performance der optimierten Schaltungen in eine Verbesserung der Zuverlässigkeit umgewandelt werden [5, 6]. Post-Fabrication und Laufzeit-Tuning: Prozess- und Laufzeitvariationen haben einen starken Einfluss auf den Minimum Energy Point (MEP) von NTC-Schaltungen, welcher mit der energieeffizientesten Versorgungsspannung assoziiert ist. Es ist ein besonderes Anliegen, die NTC-Schaltung nach der Herstellung (post-fabrication) so zu kalibrieren, dass sich die Schaltung im MEP-Zustand befindet, um die beste Energieeffizient zu erreichen. In dieser Arbeit, werden Post-Fabrication und Laufzeit-Tuning vorgeschlagen, welche die Schaltung basierend auf Geschwindigkeits- und Leistungsverbrauch-Messungen nach der Herstellung auf den MEP kalibrieren. Die vorgestellten Techniken ermitteln den MEP per Chip-Basis um den Einfluss von Prozessvariationen mit einzubeziehen und dynamisch die Versorgungsspannung und Frequenz zu adaptieren um zeitabhängige Variationen wie Workload und Temperatur zu adressieren. Zu diesem Zweck wird in die Firmware eines Chips ein Regression-Modell integriert, welches den MEP basierend auf Workload- und Temperatur-Messungen zur Laufzeit extrahiert. Das Regressions-Modell ist für jeden Chip einzigartig und basiert lediglich auf Post-Fabrication-Messungen. Simulationsergebnisse zeigen das der entwickelte Ansatz eine sehr hohe prognostische Treffsicherheit und Energieeffizienz hat, ähnlich zu hardware-implementierten Methoden, jedoch ohne hardware-seitigen Mehraufwand [7, 8]. Selektierte Flip-Flop Optimierung: Ultra-Low-Voltage Schaltungen müssen im nominalen Versorgungsspannungs-Mode arbeiten um zeitliche Anforderungen von laufenden Anwendungen zu erfüllen. In diesem Fall ist die Schaltung von starken Alterungsprozessen betroffen, welche die Transistoren durch Erhöhung der Schwellenspannungen degradieren. Unsere tiefgehenden Analysen haben gezeigt das gewisse Flip-Flop-Architekturen von diesen Alterungserscheinungen beeinflusst werden indem fälschlicherweise konstante Werte ( \u270\u27 oder \u271\u27) für eine lange Zeit gespeichert sind. Im Vergleich zu anderen Komponenten sind Flip-Flops sensitiver zu Alterungsprozessen und versagen unter anderem dabei einen neuen Wert innerhalb des vorgegebenen zeitlichen Rahmens zu übernehmen. Außerdem kann auch ein geringfügiger Spannungsabfall zu diesen zeitlichen Verstößen führen, falls die betreffenden gealterten Flip-Flops zum kritischen Pfad zuzuordnen sind. In dieser Arbeit wird eine selektiver Flip-Flop-Optimierungsmethode vorgestellt, welche die Schaltungen bezüglich Robustheit gegen statische Alterung und Spannungsabfall optimieren. Dabei werden zuerst optimierte robuste Flip-Flops generiert und diese dann anschließend in die Standard-Zellen-Bibliotheken integriert. Flip-Flops, die in der Schaltung zum kritischen Pfad gehören und Alterung sowie Spannungsabfall erfahren, werden durch die optimierten robusten Versionen ersetzt, um das Zeitverhalten und die Zuverlässigkeit der Schaltung zu verbessern [9, 10]. Simulationsergebnisse zeigen, dass die erwartete Lebenszeit eines Prozessors um 37% verbessert werden kann, während Leckströme um nur 0.1% erhöht werden. Während NTC das Potenzial hat große Energieeffizienz zu ermöglichen, ist der Einsatz in neue Anwendungsfeldern wie IoT wegen den zuvor erwähnten Problemen bezüglich der hohen Sensitivität gegenüber Variationen und deshalb mangelnder Zuverlässigkeit, noch nicht durchsetzbar. In dieser Dissertation und in noch nicht publizierten Werken [11–17], stellen wir Lösungen zu diesen Problemen vor, die eine Integration von NTC in heutige Systeme ermöglichen

Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

Broadening the Scope of Multi-Objective Optimizations in Physical Synthesis of Integrated Circuits.

In modern VLSI design, physical synthesis tools are primarily responsible for satisfying chip-performance constraints by invoking a broad range of circuit optimizations, such as buffer insertion, logic restructuring, gate sizing and relocation. This process is known as timing closure. Our research seeks more powerful and efficient optimizations to improve the state of the art in modern chip design. In particular, we integrate timing-driven relocation, retiming, logic cloning, buffer insertion and gate sizing in novel ways to create powerful circuit transformations that help satisfy setup-time constraints. State-of-the-art physical synthesis optimizations are typically applied at two scales: i) global algorithms that affect the entire netlist and ii) local transformations that focus on a handful of gates or interconnections. The scale of modern chip designs dictates that only near-linear-time optimization algorithms can be applied at the global scope — typically limited to wirelength-driven placement and legalization. Localized transformations can rely on more time-consuming optimizations with accurate delay models. Few techniques bridge the gap between fully-global and localized optimizations. This dissertation broadens the scope of physical synthesis optimization to include accurate transformations operating between the global and local scales. In particular, we integrate groups of related transformations to break circular dependencies and increase the number of circuit elements that can be jointly optimized to escape local minima. Integrated transformations in this dissertation are developed by identifying and removing obstacles to successful optimizations. Integration is achieved through mapping multiple operations to rigorous mathematical optimization problems that can be solved simultaneously. We achieve computational scalability in our techniques by leveraging analytical delay models and focusing optimization efforts on carefully selected regions of the chip. In this regard, we make extensive use of a linear interconnect-delay model that accounts for the impact of subsequent repeated insertion. Our integrated transformations are evaluated on high-performance circuits with over 100,000 gates. Integrated optimization techniques described in this dissertation ensure graceful timing-closure process and impact nearly every aspect of a typical physical synthesis flow. They have been validated in EDA tools used at IBM for physical synthesis of high-performance CPU and ASIC designs, where they significantly improved chip performance.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/78744/1/iamyou_1.pd