Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding

Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 × 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip

Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

Optimization of the motion estimation for parallel embedded systems in the context of new video standards

15 pagesInternational audienceThe effciency of video compression methods mainly depends on the motion compensation stage, and the design of effcient motion estimation techniques is still an important issue. An highly accurate motion estimation can significantly reduce the bit-rate, but involves a high computational complexity. This is particularly true for new generations of video compression standards, MPEG AVC and HEVC, which involves techniques such as different reference frames, sub-pixel estimation, variable block sizes. In this context, the design of fast motion estimation solutions is necessary, and can concerned two linked aspects: a high quality algorithm and its effcient implementation. This paper summarizes our main contributions in this domain. In particular, we first present the HME (Hierarchical Motion Estimation) technique. It is based on a multi-level refinement process where the motion estimation vectors are first estimated on a sub-sampled image. The multi-levels decomposition provides robust predictions and is particularly suited for variable block sizes motion estimations. The HME method has been integrated in a AVC encoder, and we propose a parallel implementation of this technique, with the motion estimation at pixel level performed by a DSP processor, and the sub-pixel refinement realized in an FPGA. The second technique that we present is called HDS for Hierarchical Diamond Search. It combines the multi-level refinement of HME, with a fast search at pixel-accuracy inspired by the EPZS method. This paper also presents its parallel implementation onto a multi-DSP platform and the its use in the HEVC context

Cost and Coding Efficient Motion Estimation Design Considerations for High Efficiency Video Coding (HEVC) Standard

This paper focuses on motion estimation engine design in future high-efficiency video coding (HEVC) encoders. First, a methodology is explained to analyze hardware implementation cost in terms of hardware area, memory size and memory bandwidth for various possible motion estimation engine designs. For 11 different configurations, hardware cost as well as the coding efficiency are quantified and are compared through a graphical analysis to make design decisions. It has been shown that using smaller block sizes (e.g. 4 × 4) imposes significantly larger hardware requirements at the expense of modest improvements in coding efficiency. Secondly, based on the analysis on various configurations, one configuration is chosen and algorithm improvements are presented to further reduce hardware implementation cost of the selected configuration. Overall, the proposed changes provide 56 × on-chip bandwidth, 151 × off-chip bandwidth, 4.3 × core area and 4.5 × on-chip memory area savings when compared to the hardware implementation of the HM-3.0 design.Texas Instruments Incorporate

High-Efficient Video Transmission for HDTV Broadcasting

Before broadcasting a video signal, redundant data should be removed from the transmitted video signal. This redundancy operation can be performed using many video coding standards such as H.264/Advanced Video Coding (AVC) and H.265/High-Efficient Video Coding (HEVC) standards. Although both standards produce a great video resolution, too much data are considered to be still redundant. The most exhaustive process in video encoding process is the Motion Estimation (ME) process. The more the resolution of the transmitted video signal, the more the video data to be fetched from the main memory. This will increase the required memory access time for performing the Motion Estimation process. In This chapter, a smart ME coprocessor architecture, which greatly reduces the memory access time, is presented. Data reuse algorithm is used to minimize the memory access time. The discussed coprocessor effectively reuses the data of the search area to minimize the overall memory access time (I/O memory bandwidth) while fully using all resources and hardware. This would speed up the video broadcasting process. For a search range of 32 × 32 and block size of 16 × 16, the architecture can perform Motion Estimation for 30 fps of HDTV video and easily outperforms many fast full-search architectures

Reconfigurable Computing For Video Coding

Video coding is widely used in our daily life. Due to its high computational complexity, hardware implementation is usually preferred. In this research, we investigate both ASIC hardware design approach and reconfigurable hardware design approach for video coding applications. First, we present a unified architecture that can perform Discrete Cosine Transform (DCT), Inverse Discrete Cosine Transform (IDCT), DCT domain motion estimation and compensation (DCT-ME/MC). Our proposed architecture is a Wavefront Array-based Processor with a highly modular structure consisting of 8*8 Processing Elements (PEs). By utilizing statistical properties and arithmetic operations, it can be used as a high performance hardware accelerator for video transcoding applications. We show how different core algorithms can be mapped onto the same hardware fabric and can be executed through the pre-defined PEs. In addition to the simplified design process of the proposed architecture and savings of the hardware resources, we also demonstrate that high throughput rate can be achieved for IDCT and DCT-MC by fully utilizing the sparseness property of DCT coefficient matrix. Compared to fixed hardware architecture using ASIC design approach, reconfigurable hardware design approach has higher flexibility, lower cost, and faster time-to-market. We propose a self-reconfigurable platform which can reconfigure the architecture of DCT computations during run-time using dynamic partial reconfiguration. The scalable architecture for DCT computations can compute different number of DCT coefficients in the zig-zag scan order to adapt to different requirements, such as power consumption, hardware resource, and performance. We propose a configuration manager which is implemented in the embedded processor in order to adaptively control the reconfiguration of scalable DCT architecture during run-time. In addition, we use LZSS algorithm for compression of the partial bitstreams and on-chip BlockRAM as a cache to reduce latency overhead for loading the partial bitstreams from the off-chip memory for run-time reconfiguration. A hardware module is designed for parallel reconfiguration of the partial bitstreams. The experimental results show that our approach can reduce the external memory accesses by 69% and can achieve 400 MBytes/s reconfiguration rate. Detailed trade-offs of power, throughput, and quality are investigated, and used as a criterion for self-reconfiguration. Prediction algorithm of zero quantized DCT (ZQDCT) to control the run-time reconfiguration of the proposed scalable architecture has been used, and 12 different modes of DCT computations including zonal coding, multi-block processing, and parallel-sequential stage modes are supported to reduce power consumptions, required hardware resources, and computation time with a small quality degradation. Detailed trade-offs of power, throughput, and quality are investigated, and used as a criterion for self-reconfiguration to meet the requirements set by the users

Energy-efficient acceleration of MPEG-4 compression tools

We propose novel hardware accelerator architectures for the most computationally demanding algorithms of the MPEG-4 video compression standard-motion estimation, binary motion estimation (for shape coding), and the forward/inverse discrete cosine transforms (incorporating shape adaptive modes). These accelerators have been designed using general low-energy design philosophies at the algorithmic/architectural abstraction levels. The themes of these philosophies are avoiding waste and trading area/performance for power and energy gains. Each core has been synthesised targeting TSMC 0.09 μm TCBN90LP technology, and the experimental results presented in this paper show that the proposed cores improve upon the prior art