Kilo-instruction processors: overcoming the memory wall

Historically, advances in integrated circuit technology have driven improvements in processor microarchitecture and led to todays microprocessors with sophisticated pipelines operating at very high clock frequencies. However, performance improvements achievable by high-frequency microprocessors have become seriously limited by main-memory access latencies because main-memory speeds have improved at a much slower pace than microprocessor speeds. Its crucial to deal with this performance disparity, commonly known as the memory wall, to enable future high-frequency microprocessors to achieve their performance potential. To overcome the memory wall, we propose kilo-instruction processors-superscalar processors that can maintain a thousand or more simultaneous in-flight instructions. Doing so means designing key hardware structures so that the processor can satisfy the high resource requirements without significantly decreasing processor efficiency or increasing energy consumption.Peer ReviewedPostprint (published version

Store Vulnerability Window (SVW): Re-Execution Filtering for Enhanced Load/Store Optimization

A high-bandwidth, low-latency load-store unit is a critical component of a dynamically scheduled processor. Unfortunately, it is also one of the most complex and non-scalable components. Recently, several researchers have proposed techniques that simplify the core load-store unit and improve its scalability in exchange for the in-order pre-retirement re-execution of some subset of the loads in the program. We call such techniques load/store optimizations. One recent optimization attacks load queue (LQ) scalability by replacing the expensive associative search that is used to enforce intra- and inter- thread ordering with load re-execution. A second attacks store queue (SQ) scalability by speculatively filtering some load accesses and some store entries from it. The speculatively accessed, speculatively populated SQ can be made smaller and faster, but load re-execution is required to verify the speculation. A third uses a hardware table to identify redundant loads and skip their execution altogether. Redundant load elimination is highly accurate but not 100%, so re-execution is needed to flag false eliminations. Unfortunately, the inherent benefits of load/store optimizations are mitigated by re-execution itself. Re-execution contends for cache bandwidths with store retirement, and serializes load re-execution with subsequent store retirement. If a particular technique requires a sufficient number of load re-executions, the cost of these re-executions will outweigh the benefits of the technique entirely and may even produce drastic slowdowns. This is the case for the SQ technique. Store Vulnerability Window (SVW) is a new mechanism that reduces the re-execution requirements of a given load/store optimization significantly, by an average of 85% across the three load/store optimizations we study. This reduction relieves cache port contention and removes many of the dynamic serialization events that contribute the bulk of re-execution’s cost, and allows these techniques to perform up to their full potential. For the scalable SQ optimization, this means the chnace to perform at all. Without SVW, this technique posts significant slowdowns. SVW is a simple scheme based on monotonic store sequence numbering and a novel application of Bloom Filtering. The cost of an effective SVW implementation is a 1KB buffer and an 2B field per LQ entry

NoSQ: Store-Load Communication without a Store Queue

This paper presents NoSQ (short for No Store Queue), a microarchitecture that performs store-load communication without a store queue and without executing stores in the out-of-order engine. NoSQ implements store-load communication using speculative memory bypassing (SMB), the dynamic short-circuiting of DEF-store-load-USE chains to DEF-USE chains. Whereas previous proposals used SMB as an opportunistic complement to conventional store queue-based forwarding, NoSQ uses SMB as a store queue replacement. NoSQ relies on two supporting mechanisms. The first is an advanced store-load bypassing predictor that for a given dynamic load can predict whether that load will bypass and the identity of the communicating store. The second is an efficient verification mechanism for both bypassed and non-bypassed loads using in-order load re-execution with an SMB-aware store vulnerability window (SVW) filter. The primary benefit of NoSQ is a simple, fast datapath that does not contain store-load forwarding hardware; all loads get their values either from the data cache or from the register file. Experiments show that this simpler design - despite being more speculative - slightly outperforms a conventional store-queue based design on most benchmarks (by 2% on average)

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

Reusing cached schedules in an out-of-order processor with in-order issue logic

Modern processors use out-of-order processing logic to achieve high performance in Instructions Per Cycle (IPC) but this logic has a serious impact on the achievable frequency. In order to get better performance out of smaller transistors there is a trend to increase the number of cores per die instead of making the cores themselves bigger. Moreover, for throughput-oriented and server workloads, simpler in-order processors that allow more cores per die and higher design frequencies are becoming the preferred choice. Unfortunately, for other workloads this type of cores result in a lower single thread performance. There are many workloads where it is still important to achieve good single thread performance. In this thesis we present the ReLaSch processor. Its aim is to enable high IPC cores capable of running at high clock frequencies by processing the instructions using simple superscalar in-order issue logic and caching instruction groups that are dynamically scheduled in hardware after commit, that is, out of the critical path and only when really needed. Objective This thesis has several research goals: • Show that the dynamic scheduler of a conventional out-of-order processor does a lot of redundant work because it ignores the repetitiveness of code. • Propose a complete superscalar out-of-order architecture that reduces the amount of redundant work done by creating the schedules once in dedicated hardware, storing them in a cache of schedules and reusing the schedules as much as possible. • Place the scheduler out of the critical path of execution, which should be enabled by the reduction of work that it must do. Thus, the execution path of our proposed processor can be simpler than that of a conventional out-of-order processor. Proposal and results We present the \textbf{ReLaSch} processor, named after Reused Late Schedules, in which the creation of issue-groups is removed from the critical path of execution and uses a simple and small in-order issue logic. It just wakes-up and selects the instructions of a single issue-group each cycle, instead of processing the instructions of a whole issue queue. A new logic at the end of the conventional pipeline schedules the committed instructions. The new scheduler can be complex since it is not in the critical path of execution. The schedules are cached and whenever it is possible an rgroup is read and its instructions executed. The schedules are reused, lowering the pressure on the scheduling logic. In some cases, the ReLaSch processor is able to outperform a conventional out-of-order processor, because the post-commit scheduler has a broader vision of the code. For instance, while ReLaSch can schedule together two independent instructions that are distant in the code, a conventional out-oforder processor only issues them in the same cycle if both are in-flight. The ReLaSch processor predicts the branch targets, memory aliases and latencies at scheduling time, out of the critical path. The prediction is based on the most recent executions at scheduling time. Furthermore, most of the register renaming process is performed by the scheduler and is removed from the execution pipeline. Our experiments show that ReLaSch has the same average IPC as our reference out-of-order processor and is clearly better than the reference inorder processor (1.55 speed-up). In all cases it outperforms the in-order processor and in 23 benchmarks out of 40 it has a higher IPC than the reference out-of-order processor