Kilo-instruction processors: overcoming the memory wall

Historically, advances in integrated circuit technology have driven improvements in processor microarchitecture and led to todays microprocessors with sophisticated pipelines operating at very high clock frequencies. However, performance improvements achievable by high-frequency microprocessors have become seriously limited by main-memory access latencies because main-memory speeds have improved at a much slower pace than microprocessor speeds. Its crucial to deal with this performance disparity, commonly known as the memory wall, to enable future high-frequency microprocessors to achieve their performance potential. To overcome the memory wall, we propose kilo-instruction processors-superscalar processors that can maintain a thousand or more simultaneous in-flight instructions. Doing so means designing key hardware structures so that the processor can satisfy the high resource requirements without significantly decreasing processor efficiency or increasing energy consumption.Peer ReviewedPostprint (published version

Enlarging instruction streams

The stream fetch engine is a high-performance fetch architecture based on the concept of an instruction stream. We call a sequence of instructions from the target of a taken branch to the next taken branch, potentially containing multiple basic blocks, a stream. The long length of instruction streams makes it possible for the stream fetch engine to provide a high fetch bandwidth and to hide the branch predictor access latency, leading to performance results close to a trace cache at a lower implementation cost and complexity. Therefore, enlarging instruction streams is an excellent way to improve the stream fetch engine. In this paper, we present several hardware and software mechanisms focused on enlarging those streams that finalize at particular branch types. However, our results point out that focusing on particular branch types is not a good strategy due to Amdahl's law. Consequently, we propose the multiple-stream predictor, a novel mechanism that deals with all branch types by combining single streams into long virtual streams. This proposal tolerates the prediction table access latency without requiring the complexity caused by additional hardware mechanisms like prediction overriding. Moreover, it provides high-performance results which are comparable to state-of-the-art fetch architectures but with a simpler design that consumes less energy.Peer ReviewedPostprint (published version

Application of compiler-assisted multiple instruction rollback recovery to speculative execution

Speculative execution is a method to increase instruction level parallelism which can be exploited by both super-scalar and VLIW architectures. The key to a successful general speculation strategy is a repair mechanism to handle mispredicted branches and accurate reporting of exceptions for speculated instructions. Multiple instruction rollback is a technique developed for recovery from transient processor failure. Many of the difficulties encountered during recovery from branch misprediction or from instruction re-execution due to exception in a speculative execution architecture are similar to those encountered during multiple instruction rollback. The applicability of a recently developed compiler-assisted multiple instruction rollback scheme to aid in speculative execution repair is investigated. Extensions to the compiler-assisted scheme to support branch and exception repair are presented along with performance measurements across ten application programs

A low-power cache system for high-performance processors

制度:新 ; 報告番号:甲3439号 ; 学位の種類:博士(工学) ; 授与年月日:12-Sep-11 ; 早大学位記番号:新576

Mitigating the Effect of Misspeculations in Superscalar Processors

Modern superscalar processors highly rely on the speculative execution which speculatively executes instructions and then verifies. If the prediction is different from the execution result, a misspeculation recovery is performed. Misspeculation recovery penalties still account for a substantial amount of performance reduction. This work focuses on the techniques to mitigate the effect of recovery penalties and proposes practical mechanisms which are thoroughly implemented and analyzed. In general, we can divide the misspeculation penalty into four parts: misspeculation detection delay; stale instruction elimination delay; state restoration delay and pipeline fill delay. This dissertation does not consider the detection delay, instead, we design four innovative mechanisms. Some of these mechanisms target a specific recovery delay whereas others target multiple types of delay in a unified algorithm. Mower was designed to address the stale instruction elimination delay and the state restoration delay by using a special walker. When a misprediction is detected, the walker will scan and repair the instructions which are younger than the mispredicted instruction. During the walking procedure, the correct state is restored and the stale instructions are eliminated. Based on Mower, we further simplify the design and develop a Two-Phase recovery mechanism. This mechanism uses only a basic recovery mechanism except for the case in which the retire stage was stalled by a long latency instruction. When the retire stage is stalled, the second phase is launched and the instructions in the pipeline are re-fetched. Two-Phase mechanism recovers from an earlier point in the program and overlaps the recovery penalty with the long latency penalty. In reality, some of the instructions on the wrong path can be reused during the recovery. However, such reuse of misprediction results is not easy and most of the time involves significant complexity. We design Passing Loop to reduce the pipeline fill delay. We applied our mechanism only for short forward branches which eliminates a substantial amount of complexity. In terms of memory dependence speculation and associated delays due to memory ordering violations, we develop a mechanism that optimizes store-queue-free architectures. A store-queue-free architecture experiences more memory dependence mispredictions due to its aggressive approach to speculations. A common solution is to delay the execution of an instruction which is more likely to be mispredicted. We propose a mechanism to dynamically insert predicates for comparing the address of memory instructions, which is called “Dynamic Memory Dependence Predication” (DMDP). This mechanism boosts the instruction execution to its earliest point and reduces the number of mispredictions

Empowering a helper cluster through data-width aware instruction selection policies

Narrow values that can be represented by less number of bits than the full machine width occur very frequently in programs. On the other hand, clustering mechanisms enable cost- and performance-effective scaling of processor back-end features. Those attributes can be combined synergistically to design special clusters operating on narrow values (a.k.a. helper cluster), potentially providing performance benefits. We complement a 32-bit monolithic processor with a low-complexity 8-bit helper cluster. Then, in our main focus, we propose various ideas to select suitable instructions to execute in the data-width based clusters. We add data-width information as another instruction steering decision metric and introduce new data-width based selection algorithms which also consider dependency, inter-cluster communication and load imbalance. Utilizing those techniques, the performance of a wide range of workloads are substantially increased; helper cluster achieves an average speedup of 11% for a wide range of 412 apps. When focusing on integer applications, the speedup can be as high as 22% on averagePeer ReviewedPostprint (published version