MASCOT : metadata for advanced scalable video coding tools : final report

The goal of the MASCOT project was to develop new video coding schemes and tools that provide both an increased coding efficiency as well as extended scalability features compared to technology that was available at the beginning of the project. Towards that goal the following tools would be used: - metadata-based coding tools; - new spatiotemporal decompositions; - new prediction schemes. Although the initial goal was to develop one single codec architecture that was able to combine all new coding tools that were foreseen when the project was formulated, it became clear that this would limit the selection of the new tools. Therefore the consortium decided to develop two codec frameworks within the project, a standard hybrid DCT-based codec and a 3D wavelet-based codec, which together are able to accommodate all tools developed during the course of the project

Acquisition, compression and rendering of depth and texture for multi-view video

Three-dimensional (3D) video and imaging technologies is an emerging trend in the development of digital video systems, as we presently witness the appearance of 3D displays, coding systems, and 3D camera setups. Three-dimensional multi-view video is typically obtained from a set of synchronized cameras, which are capturing the same scene from different viewpoints. This technique especially enables applications such as freeviewpoint video or 3D-TV. Free-viewpoint video applications provide the feature to interactively select and render a virtual viewpoint of the scene. A 3D experience such as for example in 3D-TV is obtained if the data representation and display enable to distinguish the relief of the scene, i.e., the depth within the scene. With 3D-TV, the depth of the scene can be perceived using a multi-view display that renders simultaneously several views of the same scene. To render these multiple views on a remote display, an efficient transmission, and thus compression of the multi-view video is necessary. However, a major problem when dealing with multiview video is the intrinsically large amount of data to be compressed, decompressed and rendered. We aim at an efficient and flexible multi-view video system, and explore three different aspects. First, we develop an algorithm for acquiring a depth signal from a multi-view setup. Second, we present efficient 3D rendering algorithms for a multi-view signal. Third, we propose coding techniques for 3D multi-view signals, based on the use of an explicit depth signal. This motivates that the thesis is divided in three parts. The first part (Chapter 3) addresses the problem of 3D multi-view video acquisition. Multi-view video acquisition refers to the task of estimating and recording a 3D geometric description of the scene. A 3D description of the scene can be represented by a so-called depth image, which can be estimated by triangulation of the corresponding pixels in the multiple views. Initially, we focus on the problem of depth estimation using two views, and present the basic geometric model that enables the triangulation of corresponding pixels across the views. Next, we review two calculation/optimization strategies for determining corresponding pixels: a local and a one-dimensional optimization strategy. Second, to generalize from the two-view case, we introduce a simple geometric model for estimating the depth using multiple views simultaneously. Based on this geometric model, we propose a new multi-view depth-estimation technique, employing a one-dimensional optimization strategy that (1) reduces the noise level in the estimated depth images and (2) enforces consistent depth images across the views. The second part (Chapter 4) details the problem of multi-view image rendering. Multi-view image rendering refers to the process of generating synthetic images using multiple views. Two different rendering techniques are initially explored: a 3D image warping and a mesh-based rendering technique. Each of these methods has its limitations and suffers from either high computational complexity or low image rendering quality. As a consequence, we present two image-based rendering algorithms that improves the balance on the aforementioned issues. First, we derive an alternative formulation of the relief texture algorithm which was extented to the geometry of multiple views. The proposed technique features two advantages: it avoids rendering artifacts ("holes") in the synthetic image and it is suitable for execution on a standard Graphics Processor Unit (GPU). Second, we propose an inverse mapping rendering technique that allows a simple and accurate re-sampling of synthetic pixels. Experimental comparisons with 3D image warping show an improvement of rendering quality of 3.8 dB for the relief texture mapping and 3.0 dB for the inverse mapping rendering technique. The third part concentrates on the compression problem of multi-view texture and depth video (Chapters 5–7). In Chapter 5, we extend the standard H.264/MPEG-4 AVC video compression algorithm for handling the compression of multi-view video. As opposed to the Multi-view Video Coding (MVC) standard that encodes only the multi-view texture data, the proposed encoder peforms the compression of both the texture and the depth multi-view sequences. The proposed extension is based on exploiting the correlation between the multiple camera views. To this end, two different approaches for predictive coding of views have been investigated: a block-based disparity-compensated prediction technique and a View Synthesis Prediction (VSP) scheme. Whereas VSP relies on an accurate depth image, the block-based disparity-compensated prediction scheme can be performed without any geometry information. Our encoder adaptively selects the most appropriate prediction scheme using a rate-distortion criterion for an optimal prediction-mode selection. We present experimental results for several texture and depth multi-view sequences, yielding a quality improvement of up to 0.6 dB for the texture and 3.2 dB for the depth, when compared to solely performing H.264/MPEG-4AVC disparitycompensated prediction. Additionally, we discuss the trade-off between the random-access to a user-selected view and the coding efficiency. Experimental results illustrating and quantifying this trade-off are provided. In Chapter 6, we focus on the compression of a depth signal. We present a novel depth image coding algorithm which concentrates on the special characteristics of depth images: smooth regions delineated by sharp edges. The algorithm models these smooth regions using parameterized piecewiselinear functions and sharp edges by a straight line, so that it is more efficient than a conventional transform-based encoder. To optimize the quality of the coding system for a given bit rate, a special global rate-distortion optimization balances the rate against the accuracy of the signal representation. For typical bit rates, i.e., between 0.01 and 0.25 bit/pixel, experiments have revealed that the coder outperforms a standard JPEG-2000 encoder by 0.6-3.0 dB. Preliminary results were published in the Proceedings of 26th Symposium on Information Theory in the Benelux. In Chapter 7, we propose a novel joint depth-texture bit-allocation algorithm for the joint compression of texture and depth images. The described algorithm combines the depth and texture Rate-Distortion (R-D) curves, to obtain a single R-D surface that allows the optimization of the joint bit-allocation in relation to the obtained rendering quality. Experimental results show an estimated gain of 1 dB compared to a compression performed without joint bit-allocation optimization. Besides this, our joint R-D model can be readily integrated into an multi-view H.264/MPEG-4 AVC coder because it yields the optimal compression setting with a limited computation effort

Selected topics in video coding and computer vision

Video applications ranging from multimedia communication to computer vision have been extensively studied in the past decades. However, the emergence of new applications continues to raise questions that are only partially answered by existing techniques. This thesis studies three selected topics related to video: intra prediction in block-based video coding, pedestrian detection and tracking in infrared imagery, and multi-view video alignment.;In the state-of-art video coding standard H.264/AVC, intra prediction is defined on the hierarchical quad-tree based block partitioning structure which fails to exploit the geometric constraint of edges. We propose a geometry-adaptive block partitioning structure and a new intra prediction algorithm named geometry-adaptive intra prediction (GAIP). A new texture prediction algorithm named geometry-adaptive intra displacement prediction (GAIDP) is also developed by extending the original intra displacement prediction (IDP) algorithm with the geometry-adaptive block partitions. Simulations on various test sequences demonstrate that intra coding performance of H.264/AVC can be significantly improved by incorporating the proposed geometry adaptive algorithms.;In recent years, due to the decreasing cost of thermal sensors, pedestrian detection and tracking in infrared imagery has become a topic of interest for night vision and all weather surveillance applications. We propose a novel approach for detecting and tracking pedestrians in infrared imagery based on a layered representation of infrared images. Pedestrians are detected from the foreground layer by a Principle Component Analysis (PCA) based scheme using the appearance cue. To facilitate the task of pedestrian tracking, we formulate the problem of shot segmentation and present a graph matching-based tracking algorithm. Simulations with both OSU Infrared Image Database and WVU Infrared Video Database are reported to demonstrate the accuracy and robustness of our algorithms.;Multi-view video alignment is a process to facilitate the fusion of non-synchronized multi-view video sequences for various applications including automatic video based surveillance and video metrology. In this thesis, we propose an accurate multi-view video alignment algorithm that iteratively aligns two sequences in space and time. To achieve an accurate sub-frame temporal alignment, we generalize the existing phase-correlation algorithm to 3-D case. We also present a novel method to obtain the ground-truth of the temporal alignment by using supplementary audio signals sampled at a much higher rate. The accuracy of our algorithm is verified by simulations using real-world sequences

Enhanced low bitrate H.264 video coding using decoder-side super-resolution and frame interpolation

Advanced inter-prediction modes are introduced recently in literature to improve video coding performances of both H.264 and High Efficiency Video Coding standards. Decoder-side motion analysis and motion vector derivation are proposed to reduce coding costs of motion information. Here, we introduce enhanced skip and direct modes for H.264 coding using decoder-side super-resolution (SR) and frame interpolation. P-and B-frames are downsampled and H.264 encoded at lower resolution (LR). Then reconstructed LR frames are super-resolved using decoder-side motion estimation. Alternatively for B-frames, bidirectional true motion estimation is performed to synthesize a B-frame from its reference frames. For P-frames, bicubic interpolation of the LR frame is used as an alternative to SR reconstruction. A rate-distortion optimal mode selection algorithm is developed to decide for each MB which of the two reconstructions to use as skip/direct mode prediction. Simulations indicate an average of 1.04 dB peak signal-to-noise ratio (PSNR) improvement or 23.0% bitrate reduction at low bitrates when compared with H.264 standard. The PSNR gains reach as high as 3.00 dB for inter-predicted frames and 3.78 dB when only B-frames are considered. Decoded videos exhibit significantly better visual quality as well.This research was supported by TUBITAK Career Grant 108E201Publisher's Versio

Analog parallel processor solutions for video encoding

This thesis deals with Cellular Nonlinear Network (CNN) analog parallel processor networks and their implementations in current video coding standards. The target applications are low-power video encoders within 3rd generation mobile terminals. The video codecs of such mobile terminals are defined by either the MPEG-4/H.263 or H.264 video standard. All of these standards are based on the block-based hybrid approach. As block-based motion estimation (ME) is responsible for most of the power consumption of such hybrid video encoders, this thesis deals mostly with low-power ME implementations. Low-power solutions are introduced at both the algorithmic and hardware levels. On the algorithmic level, the introduced implementations are derived from a segmentation algorithm, which has previously been partly realized. The first introduced algorithm reduces the computational complexity of ME within an object-based MPEG-4 encoder. The use of this algorithm enables a 60% drop in the power consumption of Full Search ME. The second algorithm calculates a near-optimal block-size partition for H.264 motion estimation. With this algorithm, the use of computationally complex Lagrange optimization in H.264 ME is not required. The third algorithm reduces the shape bit-rate of an object-based MPEG-4 encoder. On the hardware level a CNN-type ME architecture is introduced. The architecture includes connections and circuitry to fully realize block-based ME. The analog ME implemented with this architecture is capable of lower power than comparable digital realizations. A 9×9 test chip has also been realized. Additionally implemented is a digital predictive ME realization that takes advantage of the introduced partition algorithm. Although the IC layout of the ME algorithm was drawn, the design was verified as an FPGA.reviewe

Platforms for handling and development of audiovisual data

Estágio realizado na MOG Solutions e orientado por Vítor TeixeiraTese de mestrado integrado. Engenharia Informátca e Computação. Faculdade de Engenharia. Universidade do Porto. 200

Nouvelles méthodes de prédiction inter-images pour la compression d’images et de vidéos

Due to the large availability of video cameras and new social media practices, as well as the emergence of cloud services, images and videosconstitute today a significant amount of the total data that is transmitted over the internet. Video streaming applications account for more than 70% of the world internet bandwidth. Whereas billions of images are already stored in the cloud and millions are uploaded every day. The ever growing streaming and storage requirements of these media require the constant improvements of image and video coding tools. This thesis aims at exploring novel approaches for improving current inter-prediction methods. Such methods leverage redundancies between similar frames, and were originally developed in the context of video compression. In a first approach, novel global and local inter-prediction tools are associated to improve the efficiency of image sets compression schemes based on video codecs. By leveraging a global geometric and photometric compensation with a locally linear prediction, significant improvements can be obtained. A second approach is then proposed which introduces a region-based inter-prediction scheme. The proposed method is able to improve the coding performances compared to existing solutions by estimating and compensating geometric and photometric distortions on a semi-local level. This approach is then adapted and validated in the context of video compression. Bit-rate improvements are obtained, especially for sequences displaying complex real-world motions such as zooms and rotations. The last part of the thesis focuses on deep learning approaches for inter-prediction. Deep neural networks have shown striking results for a large number of computer vision tasks over the last years. Deep learning based methods proposed for frame interpolation applications are studied here in the context of video compression. Coding performance improvements over traditional motion estimation and compensation methods highlight the potential of these deep architectures.En raison de la grande disponibilité des dispositifs de capture vidéo et des nouvelles pratiques liées aux réseaux sociaux, ainsi qu’à l’émergence desservices en ligne, les images et les vidéos constituent aujourd’hui une partie importante de données transmises sur internet. Les applications de streaming vidéo représentent ainsi plus de 70% de la bande passante totale de l’internet. Des milliards d’images sont déjà stockées dans le cloud et des millions y sont téléchargés chaque jour. Les besoins toujours croissants en streaming et stockage nécessitent donc une amélioration constante des outils de compression d’image et de vidéo. Cette thèse vise à explorer des nouvelles approches pour améliorer les méthodes actuelles de prédiction inter-images. De telles méthodes tirent parti des redondances entre images similaires, et ont été développées à l’origine dans le contexte de la vidéo compression. Dans une première partie, de nouveaux outils de prédiction inter globaux et locaux sont associés pour améliorer l’efficacité des schémas de compression de bases de données d’image. En associant une compensation géométrique et photométrique globale avec une prédiction linéaire locale, des améliorations significatives peuvent être obtenues. Une seconde approche est ensuite proposée qui introduit un schéma deprédiction inter par régions. La méthode proposée est en mesure d’améliorer les performances de codage par rapport aux solutions existantes en estimant et en compensant les distorsions géométriques et photométriques à une échelle semi locale. Cette approche est ensuite adaptée et validée dans le cadre de la compression vidéo. Des améliorations en réduction de débit sont obtenues, en particulier pour les séquences présentant des mouvements complexes réels tels que des zooms et des rotations. La dernière partie de la thèse se concentre sur l’étude des méthodes d’apprentissage en profondeur dans le cadre de la prédiction inter. Ces dernières années, les réseaux de neurones profonds ont obtenu des résultats impressionnants pour un grand nombre de tâches de vision par ordinateur. Les méthodes basées sur l’apprentissage en profondeur proposéesà l’origine pour de l’interpolation d’images sont étudiées ici dans le contexte de la compression vidéo. Des améliorations en terme de performances de codage sont obtenues par rapport aux méthodes d’estimation et de compensation de mouvements traditionnelles. Ces résultats mettent en évidence le fort potentiel de ces architectures profondes dans le domaine de la compression vidéo