Širokopojasni prijenos podataka elektroenergetskom mrežom

The paper presents an overview to broadband over powe lines. Over the past few years advances in signal processing technology have enabled the advent of modem chips that are able to overcome the transmission difficulties associated with sending communications signals over electrical power lines. There are two predominant types of BPL communications configurations: Access BPL and In-Home BPL. One of the largest commercial markets for BPL is the ability to provide Internet Services by means of the Transmission Control Protocol/Internet Protocol (TCP/IP) protocols. Another significant benefit of BPL is the ability to employ “intelligent” power line networks that make use of SCADA devices.U radu je opisan pregled širokopojasnog prijenosa podataka elektroenergetskom mrežom. Razvoj tehnologije prijenosa signala omogućio je prevladavanje problema prijenosa komunikacijskih signala putem elektroenergetske mreže. Time je omogućen širokopojasni prijenos podataka kojim se osigurava pristup Internetu koristeći postojeću infrastrukturu. Ovakva komunikacija dijeli se na: pristupnu i kućnu. Najveći ekonomski značaj ove tehnologije je mogućnost pružanja pristupa Internetu TCP/IP protokolom. Osim pristupa Internetu omogućava i implementaciju pametne elektroenergetske mreže (SCADA)

Upgrading the Power Grid Functionalities with Broadband Power Line Communications: Basis, Applications, Current Trends and Challenges

This article reviews the basis and the main aspects of the recent evolution of Broadband Power Line Communications (BB-PLC or, more commonly, BPL) technologies. The article starts describing the organizations and alliances involved in the development and evolution of BPL systems, as well as the standardization institutions working on PLC technologies. Then, a short description of the technical foundation of the recent proposed technologies and a comparison of the main specifications are presented; the regulatory activities related to the limits of emissions and immunity are also addressed. Finally, some representative applications of BPL and some selected use cases enabled by these technologies are summarized, together with the main challenges to be faced.This work was financially supported in part by the Basque Government under the grants IT1426-22, PRE_2021_1_0006, and PRE_2021_1_0051, and by the Spanish Government under the grants PID2021-124706OB-I00 and RTI2018-099162-B-I00 (MCIU/AEI/FEDER, UE, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”)

Noise Sources, Effects and Countermeasures in Narrowband Power-Line Communications Networks: A Practical Approach

The integration of Distributed Generation, Electric Vehicles, and storage without compromising the quality of the power delivery requires the deployment of a communications overlay that allows monitoring and controlling low voltage networks in almost real time. Power Line Communications are gaining momentum for this purpose since they present a great trade-off between economic and technical features. However, the power lines also represent a harsh communications medium which presents different problems such as noise, which is indeed affected by Distributed Generation, Electric Vehicles, and storage. This paper provides a comprehensive overview of the types of noise that affects Narrowband Power Line Communications, including normative noises, noises coming from common electronic devices measured in actual operational power distribution networks, and noises coming from photovoltaic inverters and electric vehicle charging spots measured in a controlled environment. The paper also reviews several techniques to mitigate the effects of noise, paying special attention to passive filtering, as for being one of the most widely used solution to avoid this kind of problems in the field. In addition, the paper presents a set of tests carried out to evaluate the impact of some representative noises on Narrowband Power Line Communications network performance, as well as the effectiveness of different passive filter configurations to mitigate such an impact. In addition, the considered sources of noise can also bring value to further improve PLC communications in the new scenarios of the Smart Grid as an input to theoretical models or simulations.This work has been partly funded by the Spanish Ministry of Economy and Competitiveness through the National Program for Research Aimed at the Challenges of Society under the project OSIRIS (RTC-2014-1556-3) and through the network of excellence REDYD2050 (ENE2015-70032-REDT)

State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201

Development of methodologies for deploying and implementing local & medium area broadband PLC networks in office and residential electric grids

The use of electrical networks for telecommunications has a long history. It has been known since the beginning of the twentieth century [Ahola03]. The idea of using electrical networks for broadband communications arose in the 1990s [Hrasnica et al 04]. Recent and growing research interest has indicated that PowerLine Communications (PLC) is the threshold for achieving broadband delivery particularly in very dispersed and low teledensity areas. Currently, there are numerous PLC trials and commercial deployments underway inside and outside South Africa. Nevertheless, these PLC deployments are very isolated, done without clear methodology and performance remains bound to the physical layout of the electrical network. Because of that high bandwidth broadband PLC systems are prone to poor performance and this in turn limits the acceptance and deployment of this emerging alternative broadband technology. Though, PLC technical challenges are being addressed, there has been little analysis and research work that is focused on the “Development of Methodologies for Deploying and Implementing Local & Medium Area Broadband Power Line in Residential and Office Electric Grids” that would lead to broadband PLC being adopted and be of greater use to non-broadband communities of South Africa. PLC is a term describing several different systems using electrical grid distribution wires for simultaneous distribution of data by superimposing an analog signal [Hrasnica et al 04]. The research proposed and presented broadband PLC methodologies for typical medium voltage and local voltage PLC networks. These methodologieswere implemented and experimented with in configurations which closely mirrored residential and office settings through laboratory and multibuilding experiments using commercial 2nd Generation Mitsubishi Electric PLC technology. Research results presented not only serve to provide insight into broadband PLC but also how it handled broadband applications (communications), competed and compared with other technologies such as Ethernet LAN. In combination with networking communication theories, the research explored and analyzed the extent of PLC in providing broadband communication to residential and office electric grids at the University Fort Hare, Computer Science Department

State of the Art and Trends Review of Smart Metering in Electricity Grids

Climate change, awareness of energy efficiency, new trends in electricity markets, the obsolescence of the actual electricity model, and the gradual conversion of consumers to prosumer profiles are the main agents of progressive change in electricity systems towards the Smart Grid paradigm. The introduction of multiple distributed generation and storage resources, with a strong involvement of renewable energies, exposes the necessity of advanced metering or Smart Metering systems, able to manage and control those distributed resources. Due to the heterogeneity of the Smart Metering systems and the specific features of each grid, it is easy to find in the related literature a wide range of solutions with different features. This work describes the key elements in a Smart Metering system and compiles the most employed technologies and standards as well as their main features. Since Smart Metering systems can perform jointly with other activities, these growing initiatives are also addressed. Finally, a revision of the main trends in Smart Metering uses and deployments worldwide is included.his work has been partially supported by the Spanish Ministry of Economy and Competitiveness (project TEC2015-67868-C3-1-R), the University of the Basque Country (UPV/EHU) within the program for the specialization of the postdoctoral researcher staff, and Microgrids with Renewable Distributed Generation (MIGEDIR) (project 713RT0468), funded by the Science and Technology for Development Iberoamerican Program (CYTED)

Modular wireless networks for infrastructure-challenged environments

While access to Internet and cellular connectivity is easily achieved in densely-populated areas, provisioning of communication services is much more challenging in remote rural areas. At the same time Internet access is of critical importance to residents of such rural communities. People's curiosity and realization of the opportunities provided by Internet and cellular access is the key ingredient to adoption. However, poor network performance can easily impede the process of adoption by discouraging people to access and use connectivity. With this in mind, we evaluate performance and adoption of various connectivity technologies in rural developing regions and identify avenues that need immediate attention to guarantee smoother technology adoption. In light of this analysis we propose novel system designs that meet these needs. In this thesis we focus on cellular and broadband Internet connectivity. Commercial cellular networks are highly centralized, which requires costly backhaul. This, coupled with high price for equipment, maintenance and licensing renders cellular network access commercially-infeasible in rural areas. At the same time rural cellular communications are highly local: 70% of the rural-residential calls have an originator-destination pair within the same antenna. In line with this observation we design a low-cost cellular network architecture dubbed Kwiizya, to provide local voice and text messaging services in a rural community. Where outbound connectivity is available, Kwiizya can provide global services. While commercial networks are becoming more available in rural areas they are often out of financial reach of rural residents. Furthermore, these networks typically provide only basic voice and SMS services and no mobile data. To address these challenges, our proposed work allows Kwiizya to operate in coexistence with commercial cellular networks in order to extend local coverage and provide more advanced services that are not delivered by the commercial networks. Internet connectivity in rural areas is typically provided through slow satellite links. The challenges in performance and adoption of such networks have been previously studied. We add a unique dataset and consequent analysis to this spectrum of work, which captures the upgrade of the gateway connectivity in the rural community of Macha, Zambia from a 256kbps satellite link to a more capable 2Mbps terrestrial link. We show that the improvement in performance and user experience is not necessarily proportional to the bandwidth increase. While this increase improved the network usability, it also opened opportunities for adoption of more demanding services that were previously out of reach. As a result the network performance was severely degraded over the long term. To address these challenges we employ white space communication both for connectivity to more capable remote gateways, as well as for end user connectivity. We develop VillageLink, a distributed method that optimizes channel allocation to maximize throughput and enables both remote gateway access as well as end user coverage. While VillageLink features lightweight channel probing, we also consider external sources of channel availability. We design a novel approach for estimation of channel occupancy called TxMiner, which is capable of extracting transmitter characteristics from raw spectrum measurements. We study the adoption and implications of network connectivity in rural communities. In line with the results of our analyses we design and build system architectures that are geared to meet critical needs in these communities. While the focus of analysis in this thesis is on rural sub-Saharan Africa, the proposed designs and system implementations are more general and can serve in infrastructure-challenged communities across the world

Electromagnetic compatibility of power line communication systems

The power system has been used for communication purposes for many decades, although it was mainly the power utility companies that used low bit rates for control and monitoring purposes. In the last ten years, however, the deregulation of the power and telecommunication markets has spurred the idea of using and commercializing the power networks for a range of new communication applications and services. The idea has been developed and implemented into both, narrowband and broadband systems, which are defined in terms of the operation frequency band. Depending on the frequency band, the systems over powerlines can be: Narrow-band. They use frequencies ranging from 3-148.5 kHz in Europe, with the upper frequency extending up to 500 kHz in the United States and Japan. In Europe, this frequency range is standardized by CENELEC Standard EN 50065. Broadband. The used frequency range is 1-30MHz; 1-15MHz for outdoor systems and 15-30MHz for indoor systems. In this frequency range, the standardization situation is still unclear and there exist no regulations. The developed applications and systems use different parts of the power network: medium voltage (MV) and low voltage (LV) cabling for outdoor applications and building cabling for indoor applications. These cables are designed and optimized for power transmission at frequencies of 50/60Hz and represent a hostile medium for transmissions at higher frequencies. This thesis concentrates on electromagnetic compatibility (EMC) aspects and some optimization issues of the broadband systems, currently known as Powerline Communications (PLC) or Broadband Power Line (BPL). The work presented here was preformed in the framework of the European project OPERA (http://www.ist-opera.org/). A short description of the project is given in Chapter 1. The second chapter presents the basis, introduction, description and state of the art of the topics of interest for this thesis. That chapter is divided into three parts. Each of these parts starts with a short introduction to the topic to be addressed. The introductions are intended for those not familiar with the topic at hand and they can be skipped by those already knowledgeable of it. The first part of Chapter 2 gives an overview and introduction to telecommunication issues relevant to the thesis, as well as the general technical specifications of the OPERA system. The second part deals with the transmission medium which, for the case of PLC, is the power system. The fundamentals and the different components of the PLC system are given there and the state of the art regarding the transmission channel is presented. The third part deals with the EMC and standardization issues related to the technology. The main contributions of the thesis are presented in chapters 3 to 7. The PLC technology distinguishes itself from other technologies in that it uses already existing, ubiquitous wiring, so that no new infrastructure is needed. On the other hand, using a channel designed originally for other purposes means that it is not optimized for the frequencies and applications of interest for broadband transmission. If PLC is to compete with other technologies, these problems have to be well understood and solved, so that the system can be optimized by taking into account the parameters and constrains of the already existing medium. Although the PLC system is being improved continuously, there are still concerns about emissions, immunity and standardization. These issues are important since PLC operates in an environment already populated by other services at the same frequencies, so that fair co-existence is needed. Moreover, the PLC modem has a combined mains and telecom port and, as a consequence, the standards for conducted emissions from those two types of ports are not directly applicable. In addition, the symmetry of the cables used is low and, therefore, emissions are higher than, for example, emissions from twisted pair cables used in xDSL. A good understanding of emissions and immunity in PLC systems is therefore of great importance for the optimization of the system and for EMC standardization to be based on objective technical criteria. Even if the basic phenomena are essentially the same as for any other wire transmission system, the complexity and variability of the topologies of existing structures is so large that simple, straightforward solutions are often not applicable. Emissions from the cabling are primarily due to the common mode signals. Part of the energy in this mode is injected by the imperfectly balanced output stages of the PLC modems themselves. In addition, the common mode appears at punctual imbalanced discontinuities and distributed asymmetry along the PLC signal path in the power cables. Chapter 3 presents the work performed to improve our understanding of the sources of the common-mode current and the parameters that influence its behavior, including related measurements and simulations. For the purpose of this study, a model house was built at the EPFL's test site. Different cablings were used to study the influence of different parameters on the behavior of the common-mode current since it is the main source for both types of emissions, conducted and radiated ones. The influence of different parameters such as the cable terminations, the symmetry of the termination, the height of the conductors above the ground, the presence of power outlets, switches, empty and occupied sockets and the topology, are analyzed. The data are also used to test two methods used to simulate the differential-to-common-mode conversion and the conducted emissions, namely the transmission line model and the full wave approach provided by the Method of Moments through the Numerical Electromagnetic Code (NEC). In Chapter 4, problems related to PLC immunity testing are treated. We show that the conversion of the differential mode to the common mode is coupled with the reverse conversion by reciprocity. Due to the low symmetry of PLC cabling, part of the injected common mode test signal is converted into a differential mode signal that interferes with the wanted signal at the input of the modem being tested. Depending on the actual symmetry of the Coupling-Decoupling Network (CDN), not specified in the standards, the immunity test may yield erroneous results due to the effect of this differential mode component. Working under the assumption that the CDN is built to exhibit a symmetry similar to that of PLC networks as inferred from its longitudinal conversion loss, we estimate the differential mode disturbance level that the modems should withstand from a narrowband interferer. The bit error rate induced by the presence of the disturbing differential mode current from the CDN is also estimated, for a total physical channel transmission rate of 200 Mbps, to be of the order of 1×10-5 to 5×10-5. Since these rates can be handled by error correcting coding and MAC ARQ procedures, it is concluded that the modems are not likely to suffer any severe performance degradation due to immunity testing if the CDN exhibits a symmetry similar to that of PLC networks. Simulating the complete PLC network or any significant part of it using numerical techniques such as the method of moments proves to be of limited practical use due to the fact that PLC networks extend over many wavelengths. The transmission line approximation, on the other hand, although more efficient and sufficiently accurate for differential mode calculations, is not directly applicable to simulate the EMC behavior since it neglects the antenna-mode currents that are significant contributors to the radiated emissions. Chapter 5 presents a novel approach to evaluate the antenna-mode currents using a modified transmission line theory, thus making this numerically efficient technique applicable to the estimation of emissions in PLC. An integral equation describing the antenna-mode currents along a two-wire transmission line is derived. It is further shown that, when the line cross-sectional dimensions are electrically small, the integral equation reduces to a pair of transmission line-like equations with equivalent line parameters (per-unit-length inductance and capacitance). The derived equations make it possible to compute the antenna mode currents using a traditional transmission line code with appropriate parameters. The derived equations are tested versus numerical results obtained using NEC and reasonably good agreement is found. Another important EMC issue related to PLC is the mitigation of emissions. Chapter 6 describes a technique that has been proposed to achieve a reduction of emissions associated with indoor PLC networks through the introduction of a 180° out-of-phase replica of the PLC signal into the unused neutral-ground circuit. A modification to this technique is proposed based on the selection of the appropriate amplitude and phase of the auxiliary signal, allowing a higher degree of field attenuation. A way of implementing this technique is proposed and studied, namely the integration of a required antenna into the PLC modems themselves. The measured fields very close to the modem allow the determination of the magnitude and phase of the compensation voltage. The proposed implementation should be used only to handle customer complaints, when emissions should be lowered at locations where PLC signals might cause unwanted interference or when additional capacity is required and it can be obtained through the gained signal to noise margin. Although, in principle, due to nonalignment of the wanted and the compensation field directions, minimizing one component of the field may result in an increase of the other components, we show that the application of the technique results in an overall average reduction of 10-20 dB of all the field components in the region of interest. In the same Chapter 6, we address the more general issue of the application of mitigation techniques' gained emissions margin to increase the overall throughput of PLC systems. We show that an increase in the signal power (made possible by the inclusion of mitigation techniques) leads to a considerable increase in the PLC channel capacity. Using a number of simplifications, we show that the capacity of the channel can indeed be increased by up to 66 Mbps for mitigation efficiencies of only 10 dB. We also present the results of laboratory measurements aimed at studying, under controlled conditions, different characteristics of notching in OPERA PLC modems, such as total and effective notch width, notch depth, maximum notch depth, etc. These measurements show that it is possible to obtain attenuations of up to about 45 dB for notches in all frequency bands, 10MHz, 20MHz and 30MHz. What differs for these three bands is the minimum number of carriers that need to be notched to obtain that maximum attenuation. This is an important point, since, to implement notches that have the required depth and width, one must know how many subcarriers to suppress and how deep these need to be reduced. High density PLC deployment requires the increase of overall system data rate. To achieve the higher data rates, frequency reuse in these systems is needed. In Chapter 7, we present the idea for using so-called blocking filters as a possible solution for a frequency reuse. Experimental data obtained on a real distribution network show that the use of blocking filters can, in certain cases, ensure high enough RF separation of the LV feeders belonging to the same substation. In some cases, even with the possibility to design and integrate effective blocking filters, the system needs to provide additional synchronization mechanisms for frequency reuse

The radio spectrum requirements of broadband power line telecommunications systems.

There is concern among short wave (HF) radio users that broadband Power Line telecommunications (PLT) systems could cause serious interference to their services. The purpose of my research was to identify the factors that determine the performance of broadband PLT systems and to investigate how to maximise system performance while minimising the effect of PLT on HF radio systems. The study concentrates on the requirements for Access Band systems used to provide local loop service operating on 230/400V three-phase Low Voltage mains distribution networks. The basis of the study is a comprehensive set of measurements made on Low Voltage mains distribution networks in the UK, mainland Europe and Australia. The new approach to PLT band planning taken in this thesis uses Claude Shannon's information theory to predict the data capacity of arbitrary 3MHz sub bands. The results of the measurement programme are used to determine an optimum frequency band plan for PLT systems, taking account of the needs of the systems and the protection of other users of the HF spectrum. An example of how the proposed band plan can be used on a typical LV distribution network is included. The use of the mathematical models with the results of the attenuation, noise and emission measurements show that it is possible to improve on both the frequency band plans proposed in current PLT standards and the nonstandard frequency usage of many PLT trial systems. This will facilitate the achievement of competitive performance without causing undue radio interference, thus potentially making broadband PLT more acceptable to the HF radio community. The choice of modulation and coding systems required to deliver the predicted performance in the presence of transient interference is also discussed

Networking technology adoption : system dynamics modeling of fiber-to-the-home

Thesis (Ph. D.)--Massachusetts Institute of Technology, Engineering Systems Division, Technology, Management, and Policy Program, 2005.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Page 244 blank.Includes bibliographical references (p. 241-243).A system dynamics model is developed and run to study the adoption of fiber-to-the-home as a residential broadband technology. Communities that currently do not have broadband in the United States are modeled. This case is of particular interest to U.S. policymakers, but also relevant to other regions concerned with economic development in rural areas. The model is used to explore the effects of government policy on fiber-to-the-home deployment and on the telecommunications supply chain. The research finds that government policy relating to broadband deployment has been based on a weak understanding of the dynamics involved, resulting in trial and error policy making that has unintended consequences. The thesis shows that the current monitoring of broadband deployment by the Federal Communications Commission is inadequate to contribute to the formation of reasoned policy decisions. The model is used to explore the consequences that different regulatory scenarios have on fiber-to-the-home deployment. Among the policy choices considered are: resale of fiber-to-the-home lines to competitive providers; low cost government loans for commercial deployments; rapid deployment to all communities currently without service; and a ban on municipal deployments. The current Rural Utilities Service loan program is also included in the model and its effects are analyzed. The model is used to examine the consequences for the optoelectronics industry of different deployment scenarios. It shows that the interests of consumers, regulators, and even service providers are in conflict with the interests of the optoelectronics industry which provides a critical component necessary for the service.(cont.) Strategies to help mitigate that conflict and to promote the health of the components industry are explored. Deployment of fiber-to-the-home is costly, and cost recovery is difficult for both incumbent and competitive service providers, especially in rural and suburban regions that do not currently have service. The interests of policy makers, service providers, and component suppliers need to be aligned to implement effective policy that encourages the deployment of broadband to unserved regions. The Federal Communications Commission needs to rearchitect its monitoring of service providers and their activities to better understand the status of deployment and how its policies can help or hinder.by Andjelka Kelic.Ph.D