Compiled Low-Level Virtual Instruction Set Simulation and Profiling for Code Partitioning and ASIP-Synthesis

Abstract We present ongoing work and first results in static and detailed quantitative runtime analysis of LLVM byte code for the purpose of automatic procedural level partitioning and cosynthesis of complex software systems. Runtime behaviour is captured by reverse compilation of LLVM bytecode into augmented, self-profiling ANSI-C simulator programs retaining the LLVM instruction level. The actual global data flow is captured both in quantity and value range to guide function unit layout in the synthesis of application specific processors. Currently the implemented tool LLILA (Low Level Intermediate Language Analyzer) focuses on static code analysis on the inter-procedural data flow via e.g. function parameters and global variables to uncover a program's potential paths of data exchange

A hybrid transport/control operation triggered architecture

We present an approach to a scalable and extensible processor architecture with inherent parallelism named synZEN. One aim was to create a synthesizable application specific processor which can be mapped to an FPGA. Besides architectural features like the interconnection network for flexible data transport and synZEN units with communication managing interface we give an overview of the programming model, show basic operation design and depict assembler notations to program these architecture. The paper closes with a brief toolchain overview and some synthesis results that support our design decisions

OpenISA, um conjunto de instruções híbrido

Orientador: Edson BorinTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: OpenISA é concebido como a interface de processadores que pretendem ser altamente flexíveis. Isto é conseguido por meio de três estratégias: em primeiro lugar, o ISA é empiricamente escolhido para ser facilmente traduzido para outros, possibilitando flexibilidade do software no caso de um processador OpenISA físico não estar disponível. Neste caso, não há nenhuma necessidade de aplicar um processador virtual OpenISA em software. O ISA está preparado para ser estaticamente traduzido para outros ISAs. Segundo, o ISA não é um ISA concreto nem um ISA virtual, mas um híbrido com a capacidade de admitir modificações nos opcodes sem afetar a compatibilidade retroativa. Este mecanismo permite que as futuras versões do ISA possam sofrer modificações em vez de extensões simples das versões anteriores, um problema comum com ISA concretos, como o x86. Em terceiro lugar, a utilização de uma licença permissiva permite o ISA ser usado livremente por qualquer parte interessada no projeto. Nesta tese de doutorado, concentramo-nos nas instruções de nível de usuário do OpenISA. A tese discute (1) alternativas para ISAs, alternativas para distribuição de programas e o impacto de cada opção, (2) características importantes de OpenISA para atingir seus objetivos e (3) fornece uma completa avaliação do ISA escolhido com respeito a emulação de desempenho em duas CPUs populares, uma projetada pela Intel e outra pela ARM. Concluímos que a versão do OpenISA apresentada aqui pode preservar desempenho próximo do nativo quando traduzida para outros hospedeiros, funcionando como um modelo promissor para ISAs flexíveis da próxima geração que podem ser facilmente estendidos preservando a compatibilidade. Ainda, também mostramos como isso pode ser usado como um formato de distribuição de programas no nível de usuárioAbstract: OpenISA is designed as the interface of processors that aim to be highly flexible. This is achieved by means of three strategies: first, the ISA is empirically chosen to be easily translated to others, providing software flexibility in case a physical OpenISA processor is not available. Second, the ISA is not a concrete ISA nor a virtual ISA, but a hybrid one with the capability of admitting modifications to opcodes without impacting backwards compatibility. This mechanism allows future versions of the ISA to have real changes instead of simple extensions of previous versions, a common problem with concrete ISAs such as the x86. Third, the use of a permissive license allows the ISA to be freely used by any party interested in the project. In this PhD. thesis, we focus on the user-level instructions of OpenISA. The thesis discusses (1) ISA alternatives, program distribution alternatives and the impact of each choice, (2) important features of OpenISA to achieve its goals and (3) provides a thorough evaluation of the chosen ISA with respect to emulation performance on two popular host CPUs, one from Intel and another from ARM. We conclude that the version of OpenISA presented here can preserve close-to-native performance when translated to other hosts, working as a promising model for next-generation, flexible ISAs that can be easily extended while preserving backwards compatibility. Furthermore, we show how this can also be a program distribution format at user-levelDoutoradoCiência da ComputaçãoDoutor em Ciência da Computação2011/09630-1FAPES

SPICE²: A Spatial, Parallel Architecture for Accelerating the Spice Circuit Simulator

Spatial processing of sparse, irregular floating-point computation using a single FPGA enables up to an order of magnitude speedup (mean 2.8X speedup) over a conventional microprocessor for the SPICE circuit simulator. We deliver this speedup using a hybrid parallel architecture that spatially implements the heterogeneous forms of parallelism available in SPICE. We decompose SPICE into its three constituent phases: Model-Evaluation, Sparse Matrix-Solve, and Iteration Control and parallelize each phase independently. We exploit data-parallel device evaluations in the Model-Evaluation phase, sparse dataflow parallelism in the Sparse Matrix-Solve phase and compose the complete design in streaming fashion. We name our parallel architecture SPICE²: Spatial Processors Interconnected for Concurrent Execution for accelerating the SPICE circuit simulator. We program the parallel architecture with a high-level, domain-specific framework that identifies, exposes and exploits parallelism available in the SPICE circuit simulator. This design is optimized with an auto-tuner that can scale the design to use larger FPGA capacities without expert intervention and can even target other parallel architectures with the assistance of automated code-generation. This FPGA architecture is able to outperform conventional processors due to a combination of factors including high utilization of statically-scheduled resources, low-overhead dataflow scheduling of fine-grained tasks, and overlapped processing of the control algorithms. We demonstrate that we can independently accelerate Model-Evaluation by a mean factor of 6.5X(1.4--23X) across a range of non-linear device models and Matrix-Solve by 2.4X(0.6--13X) across various benchmark matrices while delivering a mean combined speedup of 2.8X(0.2--11X) for the two together when comparing a Xilinx Virtex-6 LX760 (40nm) with an Intel Core i7 965 (45nm). With our high-level framework, we can also accelerate Single-Precision Model-Evaluation on NVIDIA GPUs, ATI GPUs, IBM Cell, and Sun Niagara 2 architectures. We expect approaches based on exploiting spatial parallelism to become important as frequency scaling slows down and modern processing architectures turn to parallelism (\eg multi-core, GPUs) due to constraints of power consumption. This thesis shows how to express, exploit and optimize spatial parallelism for an important class of problems that are challenging to parallelize.</p

Accelerating SPICE Model-Evaluation using FPGAs

Single-FPGA spatial implementations can provide an order of magnitude speedup over sequential microprocessor implementations for data-parallel, floating-point computation in SPICE model-evaluation. Model-evaluation is a key component of the SPICE circuit simulator and it is characterized by large irregular floating-point compute graphs. We show how to exploit the parallelism available in these graphs on single-FPGA designs with a low-overhead VLIW-scheduled architecture. Our architecture uses spatial floating-point operators coupled to local high-bandwidth memories and interconnected by a time-shared network. We retime operation inputs in the model-evaluation to allow independent scheduling of computation and communication. With this approach, we demonstrate speedups of 2–18× over a dual-core 3GHz Intel Xeon 5160 when using a Xilinx Virtex 5 LX330T for a variety of SPICE device models

Cycle-accurate multicore performance models on FPGAs

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 159-165).The goal of this project is to improve computer architecture by accelerating cycle-accurate performance modeling of multicore processors using FPGAs. Contributions include a distributed technique controlling simulation on a highly-parallel substrate, hardware design techniques to reduce development effort, and a specific framework for modeling shared-memory multicore processors paired with realistic On-Chip Networks.by Michael Pellauer.Ph.D

Evaluating techniques for parallelization tuning in MPI, OmpSs and MPI/OmpSs

Parallel programming is used to partition a computational problem among multiple processing units and to define how they interact (communicate and synchronize) in order to guarantee the correct result. The performance that is achieved when executing the parallel program on a parallel architecture is usually far from the optimal: computation unbalance and excessive interaction among processing units often cause lost cycles, reducing the efficiency of parallel computation. In this thesis we propose techniques oriented to better exploit parallelism in parallel applications, with emphasis in techniques that increase asynchronism. Theoretically, this type of parallelization tuning promises multiple benefits. First, it should mitigate communication and synchronization delays, thus increasing the overall performance. Furthermore, parallelization tuning should expose additional parallelism and therefore increase the scalability of execution. Finally, increased asynchronism would provide higher tolerance to slower networks and external noise. In the first part of this thesis, we study the potential for tuning MPI parallelism. More specifically, we explore automatic techniques to overlap communication and computation. We propose a speculative messaging technique that increases the overlap and requires no changes of the original MPI application. Our technique automatically identifies the application’s MPI activity and reinterprets that activity using optimally placed non-blocking MPI requests. We demonstrate that this overlapping technique increases the asynchronism of MPI messages, maximizing the overlap, and consequently leading to execution speedup and higher tolerance to bandwidth reduction. However, in the case of realistic scientific workloads, we show that the overlapping potential is significantly limited by the pattern by which each MPI process locally operates on MPI messages. In the second part of this thesis, we study the potential for tuning hybrid MPI/OmpSs parallelism. We try to gain a better understanding of the parallelism of hybrid MPI/OmpSs applications in order to evaluate how these applications would execute on future machines and to predict the execution bottlenecks that are likely to emerge. We explore how MPI/OmpSs applications could scale on the parallel machine with hundreds of cores per node. Furthermore, we investigate how this high parallelism within each node would reflect on the network constraints. We especially focus on identifying critical code sections in MPI/OmpSs. We devised a technique that quickly evaluates, for a given MPI/OmpSs application and the selected target machine, which code section should be optimized in order to gain the highest performance benefits. Also, this thesis studies techniques to quickly explore the potential OmpSs parallelism inherent in applications. We provide mechanisms to easily evaluate potential parallelism of any task decomposition. Furthermore, we describe an iterative trialand-error approach to search for a task decomposition that will expose sufficient parallelism for a given target machine. Finally, we explore potential of automating the iterative approach by capturing the programmers’ experience into an expert system that can autonomously lead the search process. Also, throughout the work on this thesis, we designed development tools that can be useful to other researchers in the field. The most advanced of these tools is Tareador – a tool to help porting MPI applications to MPI/OmpSs programming model. Tareador provides a simple interface to propose some decomposition of a code into OmpSs tasks. Tareador dynamically calculates data dependencies among the annotated tasks, and automatically estimates the potential OmpSs parallelization. Furthermore, Tareador gives additional hints on how to complete the process of porting the application to OmpSs. Tareador already proved itself useful, by being included in the academic classes on parallel programming at UPC.La programación paralela consiste en dividir un problema de computación entre múltiples unidades de procesamiento y definir como interactúan (comunicación y sincronización) para garantizar un resultado correcto. El rendimiento de un programa paralelo normalmente está muy lejos de ser óptimo: el desequilibrio de la carga computacional y la excesiva interacción entre las unidades de procesamiento a menudo causa ciclos perdidos, reduciendo la eficiencia de la computación paralela. En esta tesis proponemos técnicas orientadas a explotar mejor el paralelismo en aplicaciones paralelas, poniendo énfasis en técnicas que incrementan el asincronismo. En teoría, estas técnicas prometen múltiples beneficios. Primero, tendrían que mitigar el retraso de la comunicación y la sincronización, y por lo tanto incrementar el rendimiento global. Además, la calibración de la paralelización tendría que exponer un paralelismo adicional, incrementando la escalabilidad de la ejecución. Finalmente, un incremente en el asincronismo proveería una tolerancia mayor a redes de comunicación lentas y ruido externo. En la primera parte de la tesis, estudiamos el potencial para la calibración del paralelismo a través de MPI. En concreto, exploramos técnicas automáticas para solapar la comunicación con la computación. Proponemos una técnica de mensajería especulativa que incrementa el solapamiento y no requiere cambios en la aplicación MPI original. Nuestra técnica identifica automáticamente la actividad MPI de la aplicación y la reinterpreta usando solicitudes MPI no bloqueantes situadas óptimamente. Demostramos que esta técnica maximiza el solapamiento y, en consecuencia, acelera la ejecución y permite una mayor tolerancia a las reducciones de ancho de banda. Aún así, en el caso de cargas de trabajo científico realistas, mostramos que el potencial de solapamiento está significativamente limitado por el patrón según el cual cada proceso MPI opera localmente en el paso de mensajes. En la segunda parte de esta tesis, exploramos el potencial para calibrar el paralelismo híbrido MPI/OmpSs. Intentamos obtener una comprensión mejor del paralelismo de aplicaciones híbridas MPI/OmpSs para evaluar de qué manera se ejecutarían en futuras máquinas. Exploramos como las aplicaciones MPI/OmpSs pueden escalar en una máquina paralela con centenares de núcleos por nodo. Además, investigamos cómo este paralelismo de cada nodo se reflejaría en las restricciones de la red de comunicación. En especia, nos concentramos en identificar secciones críticas de código en MPI/OmpSs. Hemos concebido una técnica que rápidamente evalúa, para una aplicación MPI/OmpSs dada y la máquina objetivo seleccionada, qué sección de código tendría que ser optimizada para obtener la mayor ganancia de rendimiento. También estudiamos técnicas para explorar rápidamente el paralelismo potencial de OmpSs inherente en las aplicaciones. Proporcionamos mecanismos para evaluar fácilmente el paralelismo potencial de cualquier descomposición en tareas. Además, describimos una aproximación iterativa para buscar una descomposición en tareas que mostrará el suficiente paralelismo en la máquina objetivo dada. Para finalizar, exploramos el potencial para automatizar la aproximación iterativa. En el trabajo expuesto en esta tesis hemos diseñado herramientas que pueden ser útiles para otros investigadores de este campo. La más avanzada es Tareador, una herramienta para ayudar a migrar aplicaciones al modelo de programación MPI/OmpSs. Tareador proporciona una interfaz simple para proponer una descomposición del código en tareas OmpSs. Tareador también calcula dinámicamente las dependencias de datos entre las tareas anotadas, y automáticamente estima el potencial de paralelización OmpSs. Por último, Tareador da indicaciones adicionales sobre como completar el proceso de migración a OmpSs. Tareador ya se ha mostrado útil al ser incluido en las clases de programación de la UPC