37,332 research outputs found
Human-centric light sensing and estimation from RGBD images: the invisible light switch
Lighting design in indoor environments is of primary importance for at least two reasons: 1) people should perceive an adequate light; 2) an effective lighting design means consistent energy saving. We present the Invisible Light Switch (ILS) to address both aspects. ILS dynamically adjusts the room illumination level to save energy while maintaining constant the light level perception of the users. So the energy saving is invisible to them. Our proposed ILS leverages a radiosity model to estimate the light level which is perceived by a person within an indoor environment, taking into account the person position and her/his viewing frustum (head pose). ILS may therefore dim those luminaires, which are not seen by the user, resulting in an effective energy saving, especially in large open offices (where light may otherwise be ON everywhere for a single person). To quantify the system performance, we have collected a new dataset where people wear luxmeter devices while working in office rooms. The luxmeters measure the amount of light (in Lux) reaching the people gaze, which we consider a proxy to their illumination level perception. Our initial results are promising: in a room with 8 LED luminaires, the energy consumption in a day may be reduced from 18585 to 6206 watts with ILS (currently needing 1560 watts for operations). While doing so, the drop in perceived lighting decreases by just 200 lux, a value considered negligible when the original illumination level is above 1200 lux, as is normally the case in offices
RF Localization in Indoor Environment
In this paper indoor localization system based on the RF power measurements of the Received Signal Strength (RSS) in WLAN environment is presented. Today, the most viable solution for localization is the RSS fingerprinting based approach, where in order to establish a relationship between RSS values and location, different machine learning approaches are used. The advantage of this approach based on WLAN technology is that it does not need new infrastructure (it reuses already and widely deployed equipment), and the RSS measurement is part of the normal operating mode of wireless equipment. We derive the Cramer-Rao Lower Bound (CRLB) of localization accuracy for RSS measurements. In analysis of the bound we give insight in localization performance and deployment issues of a localization system, which could help designing an efficient localization system. To compare different machine learning approaches we developed a localization system based on an artificial neural network, k-nearest neighbors, probabilistic method based on the Gaussian kernel and the histogram method. We tested the developed system in real world WLAN indoor environment, where realistic RSS measurements were collected. Experimental comparison of the results has been investigated and average location estimation error of around 2 meters was obtained
Human-centric light sensing and estimation from RGBD images: The invisible light switch
Lighting design in indoor environments is of primary importance for at least
two reasons: 1) people should perceive an adequate light; 2) an effective
lighting design means consistent energy saving. We present the Invisible Light
Switch (ILS) to address both aspects. ILS dynamically adjusts the room
illumination level to save energy while maintaining constant the light level
perception of the users. So the energy saving is invisible to them. Our
proposed ILS leverages a radiosity model to estimate the light level which is
perceived by a person within an indoor environment, taking into account the
person position and her/his viewing frustum (head pose). ILS may therefore dim
those luminaires, which are not seen by the user, resulting in an effective
energy saving, especially in large open offices (where light may otherwise be
ON everywhere for a single person). To quantify the system performance, we have
collected a new dataset where people wear luxmeter devices while working in
office rooms. The luxmeters measure the amount of light (in Lux) reaching the
people gaze, which we consider a proxy to their illumination level perception.
Our initial results are promising: in a room with 8 LED luminaires, the energy
consumption in a day may be reduced from 18585 to 6206 watts with ILS
(currently needing 1560 watts for operations). While doing so, the drop in
perceived lighting decreases by just 200 lux, a value considered negligible
when the original illumination level is above 1200 lux, as is normally the case
in offices
Evaluation of CNN-based Single-Image Depth Estimation Methods
While an increasing interest in deep models for single-image depth estimation
methods can be observed, established schemes for their evaluation are still
limited. We propose a set of novel quality criteria, allowing for a more
detailed analysis by focusing on specific characteristics of depth maps. In
particular, we address the preservation of edges and planar regions, depth
consistency, and absolute distance accuracy. In order to employ these metrics
to evaluate and compare state-of-the-art single-image depth estimation
approaches, we provide a new high-quality RGB-D dataset. We used a DSLR camera
together with a laser scanner to acquire high-resolution images and highly
accurate depth maps. Experimental results show the validity of our proposed
evaluation protocol
Position Estimation of Robotic Mobile Nodes in Wireless Testbed using GENI
We present a low complexity experimental RF-based indoor localization system
based on the collection and processing of WiFi RSSI signals and processing
using a RSS-based multi-lateration algorithm to determine a robotic mobile
node's location. We use a real indoor wireless testbed called w-iLab.t that is
deployed in Zwijnaarde, Ghent, Belgium. One of the unique attributes of this
testbed is that it provides tools and interfaces using Global Environment for
Network Innovations (GENI) project to easily create reproducible wireless
network experiments in a controlled environment. We provide a low complexity
algorithm to estimate the location of the mobile robots in the indoor
environment. In addition, we provide a comparison between some of our collected
measurements with their corresponding location estimation and the actual robot
location. The comparison shows an accuracy between 0.65 and 5 meters.Comment: (c) 2016 IEEE. Personal use of this material is permitted. Permission
from IEEE must be obtained for all other uses, in any current or future
media, including reprinting/republishing this material for advertising or
promotional purposes, creating new collective works, for resale or
redistribution to servers or lists, or reuse of any copyrighted component of
this work in other work
Cooperative localization by dual foot-mounted inertial sensors and inter-agent ranging
The implementation challenges of cooperative localization by dual
foot-mounted inertial sensors and inter-agent ranging are discussed and work on
the subject is reviewed. System architecture and sensor fusion are identified
as key challenges. A partially decentralized system architecture based on
step-wise inertial navigation and step-wise dead reckoning is presented. This
architecture is argued to reduce the computational cost and required
communication bandwidth by around two orders of magnitude while only giving
negligible information loss in comparison with a naive centralized
implementation. This makes a joint global state estimation feasible for up to a
platoon-sized group of agents. Furthermore, robust and low-cost sensor fusion
for the considered setup, based on state space transformation and
marginalization, is presented. The transformation and marginalization are used
to give the necessary flexibility for presented sampling based updates for the
inter-agent ranging and ranging free fusion of the two feet of an individual
agent. Finally, characteristics of the suggested implementation are
demonstrated with simulations and a real-time system implementation.Comment: 14 page
Recommended from our members
Technical Review of Residential Programmable Communicating Thermostat Implementation for Title 24-2008
Recommended from our members
Client-server-based LBS architecture: A novel positioning module for improved positioning performance
Permission to distribute obtained from publisher.This work presents a new efficient positioning module that operates over client-server LBS architectures. The
aim of the proposed module is to fulfil the position information requirements for LBS pedestrian applications
by ensuring the availability of reliable, highly accurate and precise position solutions based on GPS single
frequency (L1) positioning service. The positioning module operates at both LBS architecture sides; the client
(mobile device), and the server (positioning server). At the server side, the positioning module is responsible
for correcting user’s location information based on WADGPS corrections. In addition, at the mobile side,
the positioning module is continually in charge for monitoring the integrity and available of the position
solutions as well as managing the communication with the server. The integrity monitoring was based on
EGNOS integrity methods. A prototype of the proposed module was developed and used in experimental trials
to evaluate the efficiency of the module in terms of the achieved positioning performance. The positioning
module was capable of achieving a horizontal accuracy of less than 2 meters with a 95% confidence level
with integrity improvement of more than 30% from existing GPS/EGNOS services
- …