135 research outputs found

    Modular switched reluctance machines to be used in automotive applications

    Get PDF
    In the last decades industry, including also that of electrical machines and drives, was pushed near to its limits by the high market demands and fierce competition. As a response to the demanding challenges, improvements were made both in the design and manufacturing of electrical machines and drives. One of the introduced advanced technological solutions was the modular construction. This approach enables on a hand easier and higher productivity manufacturing, and on the other hand fast repairing in exploitation. Switched reluctance machines (SRMs) are very well fitted for modular construction, since the magnetic insulation of the phases is a basic design requirement. The paper is a survey of the main achievements in the field of modular electrical machines, (especially SRMs), setting the focus on the machines designed to be used in automotive applications

    NASA Tech Briefs, October 2003

    Get PDF
    Topics covered include: Cryogenic Temperature-Gradient Foam/Substrate Tensile Tester; Flight Test of an Intelligent Flight-Control System; Slat Heater Boxes for Thermal Vacuum Testing; System for Testing Thermal Insulation of Pipes; Electrical-Impedance-Based Ice-Thickness Gauges; Simulation System for Training in Laparoscopic Surgery; Flasher Powered by Photovoltaic Cells and Ultracapacitors; Improved Autoassociative Neural Networks; Toroidal-Core Microinductors Biased by Permanent Magnets; Using Correlated Photons to Suppress Background Noise; Atmospheric-Fade-Tolerant Tracking and Pointing in Wireless Optical Communication; Curved Focal-Plane Arrays Using Back-Illuminated High-Purity Photodetectors; Software for Displaying Data from Planetary Rovers; Software for Refining or Coarsening Computational Grids; Software for Diagnosis of Multiple Coordinated Spacecraft; Software Helps Retrieve Information Relevant to the User; Software for Simulating a Complex Robot; Software for Planning Scientific Activities on Mars; Software for Training in Pre-College Mathematics; Switching and Rectification in Carbon-Nanotube Junctions; Scandia-and-Yttria-Stabilized Zirconia for Thermal Barriers; Environmentally Safer, Less Toxic Fire-Extinguishing Agents; Multiaxial Temperature- and Time-Dependent Failure Model; Cloverleaf Vibratory Microgyroscope with Integrated Post; Single-Vector Calibration of Wind-Tunnel Force Balances; Microgyroscope with Vibrating Post as Rotation Transducer; Continuous Tuning and Calibration of Vibratory Gyroscopes; Compact, Pneumatically Actuated Filter Shuttle; Improved Bearingless Switched-Reluctance Motor; Fluorescent Quantum Dots for Biological Labeling; Growing Three-Dimensional Corneal Tissue in a Bioreactor; Scanning Tunneling Optical Resonance Microscopy; The Micro-Arcsecond Metrology Testbed; Detecting Moving Targets by Use of Soliton Resonances; and Finite-Element Methods for Real-Time Simulation of Surgery

    Design of a Bearingless Permanent Magnet Synchronous Machine with a Star Point-Connected Axial Active Magnetic Bearing

    Get PDF
    The bearingless synchronous machine is considered with slotted stator, cylindrical rotor with sleeve-protected surface-mounted permanent magnets and six actively controlled degrees of freedom as high-speed drive. The focus is set on two key aspects: The machine design under consideration of size-dependent scaling effects and a novel kind of feeding the excitation winding of the axial active magnetic bearing. Since the considered bearingless PM machines typically exhibit a low degree of magnetic saturation and are equipped with distributed windings, the two-dimensional analytical calculation is used to calculate the rotor suspension force and disturbing rotor forces. These calculations are used in the subsequent electromagnetic design process. At the beginning of the design process, boundary conditions are discussed, that are derived geometrically for the combined drive and suspension winding, structural mechanically for the sleeve height and thermally for the loss and output power density. On the basis of two different machine sizes, on the one hand approximately 1.5 kW and on the other hand approximately 60 kW at 75 mm and 130 mm outer diameter, respectively, at corresponding active axial length of 40 mm and 125 mm, this work shows, how the choice of pole count, bore diameter and magnet height influences the properties relevant for the rotor position control. It is concluded that an increase in pole count, a reduction in bore diameter and an increase in magnet height reduce the undesired parasitic lateral rotor forces, caused by rotor eddy currents and armature reaction. In order to investigate scaling effects, an analytical calculation is used, where the focus is set on the two-dimensional electrodynamic field calculation. By means of a 1 kW / 60000 rpm-prototype drive, consisting of a bearingless machine and a combined active radial-axial magnetic bearing, the accuracy of the results from calculation and simulation is verified. In order to reduce the number of required power electronic half-bridges, a concept is investigated, in which the axial magnetic bearing is supplied by a current between the star points of the combined winding sections in the bearingless machine. To do so the concept of the widely used space vector pulse-width modulation for 3-phase systems is extended to a double 3-phase system in a way that the axial magnetic bearing current corresponds to the sum current in the star point of one 3-phase system. This current can be controlled by the variation of the two star point electric potentials. However, additional current oscillations in the axial bearing current and in the 3-phase current can occur if the inverter is operated close to its voltage limit or if relatively high axial bearing currents must be provided at high dynamics. Anyway, the concept is considered a promising approach, since in this application as turbo-charger drive the disturbing effects do not occur

    Critical Review of Flywheel Energy Storage System

    Get PDF
    This review presents a detailed summary of the latest technologies used in flywheel energy storage systems (FESS). This paper covers the types of technologies and systems employed within FESS, the range of materials used in the production of FESS, and the reasons for the use of these materials. Furthermore, this paper provides an overview of the types of uses of FESS, covering vehicles and the transport industry, grid leveling and power storage for domestic and industrial electricity providers, their use in motorsport, and applications for space, satellites, and spacecraft. Different types of machines for flywheel energy storage systems are also discussed. This serves to analyse which implementations reduce the cost of permanent magnet synchronous machines. As well as this, further investigations need to be carried out to determine the ideal temperature range of operation. Induction machines are currently stoutly designed with lower manufacturing cost, making them unsuitable for high-speed operations. Brushless direct current machines, the Homolar machines, and permanent magnet synchronous machines should also be considered for future research activities to improve their performance in a flywheel energy storage system. An active magnetic bearing can also be used alongside mechanical bearings to reduce the control systems’ complications, thereby making the entire system cost-effective

    Magnetically levitated hysteresis motor driven linear stage for in-vacuum transportation tasks

    Get PDF
    This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2019Cataloged from PDF version of thesis.Includes bibliographical references (pages 241-246).This thesis presents a new in-vacuum reticle transportation mechanism for extreme ultraviolet (EUV) photolithography machines. In the photolithography process, the reticle is a quartz plate that contains a pattern of the integrated circuit, which needs to be transported between a storage position and the exposure stage. In next-generation EUV lithography machines, the reticle handling system must satisfy the following requirements: (1) transport the reticle through a distance of 2 meters, (2) the height of the mechanism needs to be within 100 mm, (3) operate in vacuum, and (4) satisfy ultra-tight contamination requirements. To fulfill these requirements, a conventional robotic reticle handler is inadequate. In this work, we designed, built, and tested a magnetically-levitated linear stage prototype, targeting at the reticle transportation application. Compared with robot manipulators, linear stages typically require less volume for long-distance transportation tasks.Magnetic suspension is used to eliminate mechanical contact and thereby avoid particle generation that can contaminate the reticle. The stage's linear motion is driven by linear hysteresis motors, which allows using solid-steel motor secondaries on the moving stage. This is desirable for in-vacuum operation, since permanent magnets can out-gas in high vacuum when not encapsulated. The magnetic suspension of the stage is achieved using a novel linear bearingless slice motor design, where the stage's magnetic suspension in three degrees of freedom, including vertical, pitch, and roll, are achieved passively. This compact design effectively reduces the number of sensors and actuators being used. The prototype system has successfully levitated the moving stage. The resonance frequency of the passively levitated degrees of freedom is approximately 10 Hz, and the suspension bandwidth of the actively-controlled degrees of freedom is about 60 Hz.The stage's maximum thrust force is 5.8 N under a 2.5 A current amplitude, which corresponds to a stage acceleration of 1200 M/s². This is able to satisfy the acceleration requirement for reticle transportation task. The stage was tested to track a reticle handling reference trajectory, where the maximum position tracking error of our linear stage is 50 [mu]m. The stage's lateral displacements during motion is below 50 [mu]m, which is well below making mechanical contact to the side walls. To our knowledge, this work represents the first study of linear hysteresis motors, and the first linear bearingless slice motor design. Hysteresis motors are a type of electric machine that operates using the magnetic hysteresis effect of the secondary material. Since the magnetization in the rotor lags behind the external field, a thrust force/torque can be generated.In prior usage, hysteresis motors have been operated in open-loop, which makes them unsuitable for applications where dynamic performance is critical. As a part of this thesis work, we also studied the modeling and closed-loop torque and position control for hysteresis motors. The proposed control method was tested with three rotary hysteresis motors, including two custom-made motors of different rotor materials and one off-the-shelf hysteresis motor. Experimental results show that position control for all three motors can reach a bandwidth of 130 Hz. To our best knowledge, this is the first work that enabled high-bandwidth torque and position control for hysteresis motors, which allows this motor to be used for servo applications.Sponsored by ASMLby Lei Zhou.Ph. D.Ph.D. Massachusetts Institute of Technology, Department of Mechanical Engineerin

    A review of design optimization methods for electrical machines

    Full text link
    © 2017 by the authors. Licensee MDPI, Basel, Switzerland. Electrical machines are the hearts of many appliances, industrial equipment and systems. In the context of global sustainability, they must fulfill various requirements, not only physically and technologically but also environmentally. Therefore, their design optimization process becomes more and more complex as more engineering disciplines/domains and constraints are involved, such as electromagnetics, structural mechanics and heat transfer. This paper aims to present a review of the design optimization methods for electrical machines, including design analysis methods and models, optimization models, algorithms and methods/strategies. Several efficient optimization methods/strategies are highlighted with comments, including surrogate-model based and multi-level optimization methods. In addition, two promising and challenging topics in both academic and industrial communities are discussed, and two novel optimization methods are introduced for advanced design optimization of electrical machines. First, a system-level design optimization method is introduced for the development of advanced electric drive systems. Second, a robust design optimization method based on the design for six-sigma technique is introduced for high-quality manufacturing of electrical machines in production. Meanwhile, a proposal is presented for the development of a robust design optimization service based on industrial big data and cloud computing services. Finally, five future directions are proposed, including smart design optimization method for future intelligent design and production of electrical machines

    Magnetic Bearings

    Get PDF
    The term magnetic bearings refers to devices that provide stable suspension of a rotor. Because of the contact-less motion of the rotor, magnetic bearings offer many advantages for various applications. Commercial applications include compressors, centrifuges, high-speed turbines, energy-storage flywheels, high-precision machine tools, etc. Magnetic bearings are a typical mechatronic product. Thus, a great deal of knowledge is necessary for its design, construction and operation. This book is a collection of writings on magnetic bearings, presented in fragments and divided into six chapters. Hopefully, this book will provide not only an introduction but also a number of key aspects of magnetic bearings theory and applications. Last but not least, the presented content is free, which is of great importance, especially for young researcher and engineers in the field

    Comparison of interior permanent magnet synchronous machines for a high-speed application

    Get PDF
    Permanent Magnet machines have been increasingly used in high-speed applications due to the advantages they offer such as higher efficiency, output torque and, output power. This dissertation discusses the electrical and magnetic design of permanent magnet machines and the design and analysis of two 10 kW, 30000 rpm Interior Permanent Magnet (IPM) machines. This dissertation consists of two parts: the first part discusses high-speed machine topologies, and in particular the permanent magnet machine. Trends, advantages, disadvantages, recent developments, etc. are discussed and conclusions are made. The second part presents the design, analysis and testing of interior permanent magnet machines for a high-speed application. The machines are designed from first principles and are simulated using Ansys Maxwell software to understand the finite element analysis. In order to obtain a fair comparison between the machines, the required output criteria was used as the judging criteria (10kW, 30000 rpm). As a result, the rotor diameter, stator diameter, airgap length, and stack length were kept the same for both machines. The winding configuration was set as distributed windings, however the number of turns and other details were kept flexible in order to be able to obtain the best design for each machine. Similarly, the magnet volume was kept flexible as this could be used as a comparison criteria relating to the cost of the machines. The two IPM topologies are compared with respect to their torque, magnetic field, airgap flux, core loss, efficiency, and cost. The radial IPM produces a smoother torque output, with lower torque ripple, and has lower losses compared to the circumferential IPM which produces a higher torque and power output. Furthermore, the circumferential IPM also experiences much higher torque ripple and core losses, both of which are highly undesirable characteristics for high-speed machines. In addition, the circumferential IPM has a much more complex manufacturing process compared to the radial IPM which would significantly increase the cost of prototyping the machine, thus the radial IPM was selected for prototyping and brief experimental analysis. The radial IPM has been experimentally tested under no-load conditions. These results were successfully compared to the simulated and analytical results to show correlation between the design and experimental process. Potential areas of further work may include conducting detailed loss analysis to understand the effects that changing various design parameters has on the core loss and overall performance. Detailed thermal and mechanical analysis of the machines may also result in interesting conclusions that would alter the design of the machine to make it more efficient

    An Adaptive Nonlinear Control for Gyro Stabilized Platform Based on Neural Networks and Disturbance Observer

    Get PDF
    In order to improve the tracking performance of gyro stabilized platform with disturbances and uncertainties, an adaptive nonlinear control based on neural networks and reduced-order disturbance observer for disturbance compensation is developed. First the reduced-order disturbance observer estimates the disturbance directly. The error of the estimated disturbance caused by parameter variation and measurement noise is then approximated by neural networks. The phase compensation is also introduced to the proposed control law for the desired sinusoidal tracking. The stability of the proposed scheme is analyzed by the Lyapunov criterion. Experimental results show the validity of the proposed control approach
    • …
    corecore