Design and development of auxiliary components for a new two-stroke, stratified-charge, lean-burn gasoline engine

A unique stepped-piston engine was developed by a group of research engineers at Universiti Teknologi Malaysia (UTM), from 2003 to 2005. The development work undertaken by them engulfs design, prototyping and evaluation over a predetermined period of time which was iterative and challenging in nature. The main objective of the program is to demonstrate local R&D capabilities on small engine work that is able to produce mobile powerhouse of comparable output, having low-fuel consumption and acceptable emission than its crankcase counterpart of similar displacement. A two-stroke engine work was selected as it posses a number of technological challenges, increase in its thermal efficiency, which upon successful undertakings will be useful in assisting the group in future powertrain undertakings in UTM. In its carbureted version, the single-cylinder aircooled engine incorporates a three-port transfer system and a dedicated crankcase breather. These features will enable the prototype to have high induction efficiency and to behave very much a two-stroke engine but equipped with a four-stroke crankcase lubrication system. After a series of analytical work the engine was subjected to a series of laboratory trials. It was also tested on a small watercraft platform with promising indication of its flexibility of use as a prime mover in mobile platform. In an effort to further enhance its technology features, the researchers have also embarked on the development of an add-on auxiliary system. The system comprises of an engine control unit (ECU), a directinjector unit, a dedicated lubricant dispenser unit and an embedded common rail fuel unit. This support system was incorporated onto the engine to demonstrate the finer points of environmental-friendly and fuel economy features. The outcome of this complete package is described in the report, covering the methodology and the final characteristics of the mobile power plant

Building a 3D meshing framework using good software engineering practices

3D meshing tools are complex pieces of software involving varied algorithms generally with high computing demands. New requirements and techniques appear continuously and being able to incorporate them into existing tools helps keep them up to date. Modifying complex software is generally a complex task and software engineering strategies such as object-orientation and design patterns promote modifiability and flexibility. We present the design of a 3D meshing framework based on these concepts that yields a software that is both flexible at runtime and easy to modify, while not sacrificing performance severely. We also present an evaluation of the framework design quality and performance1st International Workshop on Advanced Software Engineering: Expanding the Frontiers of Software Technology - Experiences in Software DevelopmentRed de Universidades con Carreras en Informática (RedUNCI

Integrated modeling and analysis methodologies for architecture-level vehicle design.

In order to satisfy customer expectations, a ground vehicle must be designed to meet a broad range of performance requirements. A satisfactory vehicle design process implements a set of requirements reflecting necessary, but perhaps not sufficient conditions for assuring success in a highly competitive market. An optimal architecture-level vehicle design configuration is one of the most important of these requirements. A basic layout that is efficient and flexible permits significant reductions in the time needed to complete the product development cycle, with commensurate reductions in cost. Unfortunately, architecture-level design is the most abstract phase of the design process. The high-level concepts that characterize these designs do not lend themselves to traditional analyses normally used to characterize, assess, and optimize designs later in the development cycle. This research addresses the need for architecture-level design abstractions that can be used to support ground vehicle development. The work begins with a rigorous description of hierarchical function-based abstractions representing not the physical configuration of the elements of a vehicle, but their function within the design space. The hierarchical nature of the abstractions lends itself to object orientation - convenient for software implementation purposes - as well as description of components, assemblies, feature groupings based on non-structural interactions, and eventually, full vehicles. Unlike the traditional early-design abstractions, the completeness of our function-based hierarchical abstractions, including their interactions, allows their use as a starting point for the derivation of analysis models. The scope of the research in this dissertation includes development of meshing algorithms for abstract structural models, a rigid-body analysis engine, and a fatigue analysis module. It is expected that the results obtained in this study will move systematic design and analysis to the earliest phases of the vehicle development process, leading to more highly optimized architectures, and eventually, better ground vehicles. This work shows that architecture level abstractions in many cases are better suited for life cycle support than geometric CAD models. Finally, substituting modeling, simulation, and optimization for intuition and guesswork will do much to mitigate the risk inherent in large projects by minimizing the possibility of incorporating irrevocably compromised architecture elements into a vehicle design that no amount of detail-level reengineering can undo

A meshing tool product line architecture

Meshing tools are extremely complex pieces of software. Traditionally, they have been built in a one by one basis, without systematically reusing already developed parts. The area has matured so that we can currently think of building meshing tools in a more industrial manner. Software product lines is a trend in software development that promotes systematic reuse. We propose a layered product line architecture for meshing tools that can be instantiated with different algorithms, ways of implementing basic concepts, and even for two or three dimensional meshing tools. We specify it formally using xADL and we show that the architecture is compatible with a series of already built tools. This work is the beginning of a domain analysis that has the potential to go beyond the sometimes rigid descriptions provided by architectural description languages.1st International Workshop on Advanced Software Engineering: Expanding the Frontiers of Software Technology - Session 1: Software ArchitectureRed de Universidades con Carreras en Informática (RedUNCI

The 1999 Center for Simulation of Dynamic Response in Materials Annual Technical Report

Introduction: This annual report describes research accomplishments for FY 99 of the Center for Simulation of Dynamic Response of Materials. The Center is constructing a virtual shock physics facility in which the full three dimensional response of a variety of target materials can be computed for a wide range of compressive, ten- sional, and shear loadings, including those produced by detonation of energetic materials. The goals are to facilitate computation of a variety of experiments in which strong shock and detonation waves are made to impinge on targets consisting of various combinations of materials, compute the subsequent dy- namic response of the target materials, and validate these computations against experimental data

Coupled Fluid-Structure Interaction Modeling of a Parafoil

In the summer of 2014, Performance Designs, Inc. contacted Embry-Riddle Aeronautical University’s Eagle Flight Research Center to lead an investigation on square parachute design and optimization using modern computational methods to reduce costs in experimental testing. This thesis investigates the foundation for using an implicit fluid-structure interaction computational model to tackle the challenges of modeling a highly-flexible, porous fabric for design optimization of a parafoil parachute’s transient performance. Canopy deformations of a single-cell square parafoil using a fluid-structure interaction (FSI) model with nonlinear material modeling is compared to an experimental setup of matching geometry. The results of this thesis yielded a partial match of 25% between the experimental and FSI model deformations and thus asserts that fluid-structural modeling using ANSYS Multiphysics can be used to model square parachutes

An integrated platform for design and numerical analysis of shield tunnelling processes on different levels of detail

Building and construction information modelling for decision making during the life cycle of infrastructure projects are vital tools for the analysis of complex, integrated, multi-disciplinary systems. The traditional design process is cumbersome and involves significant manual, time-consuming preparation and analysis as well as significant computational resources. To ensure a seamless workflow during the design and analysis and to minimise the computation time, we propose a novel concept of multi-level numerical simulations, enabling the modelling on different Levels of Detail (LoDs) for each physical component, process information, and analysis type. In this paper, we present SATBIM, an integrated platform for information modelling, structural analysis and visualisation of the mechanised tunnelling process for design support. Based on a multi-level integrated parametric Tunnel Information Model, numerical models for each component on different LoDs are developed, considering proper geometric as well as material representation, interfaces and the representation of the construction process. Our fully automatic modeller for arbitrary tunnel alignments provides a high degree of automation for the generation, the setup and the execution of the simulation model, connecting the multi-level information model with the open-source simulation software KRATOS. The software of SATBIM is organized in a modular way in order to offer high flexibility not only for further extensions, but also for adaptation to future improvements of the simulation software. The SATBIM platform enables practical, yet flexible and user-friendly generation of the tunnel structure for arbitrary alignments on different LoDs, supporting the design process and providing an insight into soil-structure interactions during construction

An architecture to predict anomalies in industrial processes

Dissertation presented as the partial requirement for obtaining a Master's degree in Data Science and Advanced Analytics, specialization in Data ScienceThe Internet of Things (IoT) and machine learning algorithms (ML) are enabling a revolutionary change in digitization in numerous areas, benefiting Industry 4.0 in particular. Predictive maintenance using machine learning models is being used to protect assets in industry. In this paper, an architecture for predicting anomalies in industrial processes was proposed in which SMEs can be guided in implementing an IIoT architecture for predictive maintenance (PdM). This research was conducted to understand what machine learning architectures and models are generally used by industry for PdM. An overview of the concepts of the Industrial Internet of Things (IIoT), machine learning (ML), and predictive maintenance (PdM) was provided, and through a systematic literature review, it was possible to understand their applications and which technologies enable their use. The survey revealed that PdM applications are increasingly common and that there are many studies on the development of new ML techniques. The survey conducted confirmed the usefulness of the artifact and showed the need for an architecture to guide the implementation of PdM. This research can be a contribution for SMEs, allowing them to become more efficient and reduce both production and maintenance costs in order to keep up with multinational companies

Model based collaborative design & optimization of blended wing body aircraft configuration: AGILE EU project

Novel configuration design choices may help achieve revolutionary goals for reducing fuel burn, emission and noise, set by Flightpath 2050. One such advance configuration is a blended wing body. Due to multi-diciplinary nature of the configuration, several partners with disciplinary expertise collaborate in a Model driven ‘AGILE MDAO framework’ to design and evaluate the novel configuration. The objective of this research are : - To create and test a model based collaborative framework using AGILE Paradigm for novel configuration design & optimization, involving large multinational team. Reduce setup time for complex MDO problem. - Through Multi fidelity design space exploration, evaluate aerodynamic performance - The BWB disciplinary analysis models such as aerodynamics, propulsion, onboard systems, S&C were integrated and intermediate results are published in this report