Time Dependent Performance Analysis of Wireless Networks

Many wireless networks are subject to frequent changes in a combination of network topology, traffic demand, and link capacity, such that nonstationary/transient conditions always exist in packet-level network behavior. Although there are extensive studies on the steady-state performance of wireless networks, little work exists on the systematic study of their packet-level time varying behavior. However, it is increasingly noted that wireless networks must not only perform well in steady state, but must also have acceptable performance under nonstationary/transient conditions. Furthermore, numerous applications in today's wireless networks are very critical to the real-time performance of delay, packet delivery ratio, etc, such as safety applications in vehicular networks and military applications in mobile ad hoc networks. Thus, there exists a need for techniques to analyze the time dependent performance of wireless networks. In this dissertation, we develop a performance modeling framework incorporating queuing and stochastic modeling techniques to efficiently evaluate packet-level time dependent performance of vehicular networks (single-hop) and mobile ad hoc networks (multi-hop). For vehicular networks, we consider the dynamic behavior of IEEE 802.11p MAC protocol due to node mobility and model the network hearability as a time varying adjacency matrix. For mobile ad hoc networks, we focus on the dynamic behavior of network layer performance due to rerouting and model the network connectivity as a time varying adjacency matrix. In both types of networks, node queues are modeled by the same fluid flow technique, which follows flow conservation principle to construct differential equations from a pointwise mapping of the steady-state queueing relationships. Numerical results confirm that fluid-flow based performance models are able to respond to the ongoing nonstationary/transient conditions of wireless networks promptly and accurately. Moreover, compared to the computation time of standard discrete event simulator, fluid-flow based model is shown to be a more scalable evaluation tool. In general, our proposed performance model can be used to explore network design alternatives or to get a quick estimate on the performance variation in response to some dynamic changes in network conditions

Socially-aware congestion control in ad-hoc networks: Current status and the way forward

Ad-hoc social networks (ASNETs) represent a special type of traditional ad-hoc network in whicha user’s social properties (such as the social connections and communications metadata as wellas application data) are leveraged for offering enhanced services in a distributed infrastructurelessenvironments. However, the wireless medium, due to limited bandwidth, can easily suffer from theproblem of congestion when social metadata and application data are exchanged among nodes—a problem that is compounded by the fact that some nodes may act selfishly and not share itsresources. While a number of congestion control schemes have been proposed for the traditional ad-hoc networks, there has been limited focus on incorporating social awareness into congestion controlschemes. We revisit the existing traditional ad-hoc congestion control and data distribution protocolsand motivate the need for embedding social awareness into these protocols to improve performance.We report that although some work is available in opportunistic network that uses socially-awaretechniques to control the congestion issue, this area is largely unexplored and warrants more researchattention. In this regards, we highlight the current research progress and identify multiple futuredirections of research

Reliable data delivery in wireless sensor networks

Wireless sensor networks (WSN) have generated tremendous interest among researchers these years because of their potential usage in a wide variety of applications. Sensor nodes are inexpensive portable devices with limited processing power and energy resources. Sensor nodes can be used to collect information from the environment, locally process this data and transmit the sensed data back to the user. This thesis proposes a new reliable data delivery protocol for general point-to-point data delivery (unicasting) in wireless sensor networks. The new protocol is designed that aims at providing 100% reliability when possible as well as minimizing overhead and network delay. The design of the new protocol includes three components. The new protocol adopts a NACK-based hop-by-hop loss detection and recovery scheme using end-to-end sequence numbers. In order to solve the single/last packet problem in the NACK-based approach, a hybrid ACK/NACK scheme is proposed where an ACK-based approach is used as a supplement to the NACK-based approach to solve the single/last packet problem. The proposed protocol also has a new queue management scheme that gives priority to new data. By introducing the idea of a Ready_Bit and newer packet first rule in the transmission queue, nodes can detect and recover lost packets in parallel with the normal data transmission process. The performance of the new protocol is tested in a Crossbow MicaZ testbed. Experimental results show that the new protocol performs well under various system and protocol parameter settings

Journal of Telecommunications and Information Technology, 2009, nr 2

kwartalni

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

Centralized Rate Allocation and Control in 802.11-based Wireless Mesh Networks

Wireless Mesh Networks (WMNs) built with commodity 802.11 radios are a cost-effective means of providing last mile broadband Internet access. Their multihop architecture allows for rapid deployment and organic growth of these networks. 802.11 radios are an important building block in WMNs. These low cost radios are readily available, and can be used globally in license-exempt frequency bands. However, the 802.11 Distributed Coordination Function (DCF) medium access mechanism does not scale well in large multihop networks. This produces suboptimal behavior in many transport protocols, including TCP, the dominant transport protocol in the Internet. In particular, cross-layer interaction between DCF and TCP results in flow level unfairness, including starvation, with backlogged traffic sources. Solutions found in the literature propose distributed source rate control algorithms to alleviate this problem. However, this requires MAC-layer or transport-layer changes on all mesh routers. This is often infeasible in practical deployments. In wireline networks, router-assisted rate control techniques have been proposed for use alongside end-to-end mechanisms. We evaluate the feasibility of establishing similar centralized control via gateway mesh routers in WMNs. We find that commonly used router-assisted flow control schemes designed for wired networks fail in WMNs. This is because they assume that: (1) links can be scheduled independently, and (2) router queue buildups are sufficient for detecting congestion. These abstractions do not hold in a wireless network, rendering wired scheduling algorithms such as Fair Queueing (and its variants) and Active Queue Management (AQM) techniques ineffective as a gateway-enforceable solution in a WMN. We show that only non-work-conserving rate-based scheduling can effectively enforce rate allocation via a single centralized traffic-aggregation point. In this context we propose, design, and evaluate a framework of centralized, measurement-based, feedback-driven mechanisms that can enforce a rate allocation policy objective for adaptive traffic streams in a WMN. In this dissertation we focus on fair rate allocation requirements. Our approach does not require any changes to individual mesh routers. Further, it uses existing data traffic as capacity probes, thus incurring a zero control traffic overhead. We propose two mechanisms based on this approach: aggregate rate control (ARC) and per-flow rate control (PFRC). ARC limits the aggregate capacity of a network to the sum of fair rates for a given set of flows. We show that the resulting rate allocation achieved by DCF is approximately max-min fair. PFRC allows us to exercise finer-grained control over the rate allocation process. We show how it can be used to achieve weighted flow rate fairness. We evaluate the performance of these mechanisms using simulations as well as implementation on a multihop wireless testbed. Our comparative analysis show that our mechanisms improve fairness indices by a factor of 2 to 3 when compared with networks without any rate limiting, and are approximately equivalent to results achieved with distributed source rate limiting mechanisms that require software modifications on all mesh routers

Mobile ad hoc networks for intelligent systems

Advances in wireless technology and portable computing along with demands for high user mobility have provided a major promotion toward the development of ad hoc networks. Mobile ad hoc networks feature dynamic topology, self-organization, limited bandwidth and battery power of a node. They do not rely on specialized routers for path discovery and traffic routing. Research on ad hoc networks has been extensively investigated in the past few years and related work has focused on many of the layers of the communications architecture. This research intends to investigate applications of MANET for intelligent systems, including intelligent transportation system (ITS), sensor network and mobile intelligent robot network, and propose some approaches to topology management, link layer multiple access and routing algorithms. Their performance is evaluated by theoretical analysis and off-the-shelf simulation tools. Most current research on ad hoc networks assumes the availability of IEEE 802.11. However, the RTS/CTS protocol of 802.11 still leads to packet collision which in turn decreases the network throughput and lifetime. For sensor networks, sensors are mostly battery operated. Hence, resolving packet collision may improve network lifetime by saving valuable power. Using space and network diversity combination, this work proposes a new packet separation approach to packet collision caused by masked nodes. Inter-vehicle communication is a key component of ITS and it is also called vehicular ad hoc network. VANET has many features different from regular MANETs in terms of mobility, network size and connectivity. Given rapid topology changes and network partitioning, this work studies how to organize the numerous vehicular nodes and establish message paths between any pair of vehicular nodes if they are not apart too far away. In urban areas, the inter-vehicle communication has different requirements and constraints than highway environments. The proposed position-based routing strategy for VANETs utilizes the traffic pattern in city environments. Packets are forwarded based on traffic lights timing sequence and the moving direction of relaying vehicles. A multicast protocol is also introduced to visualize the real time road traffic with customized scale. Only vehicles related to a source node\u27s planned trajectory will reply the query packet. The visualized real time traffic information therefore helps the driver make better decision in route planning when traffic congestion happens. Nowadays robots become more and more powerful and intelligent. They can take part in operations in a cooperative manner which makes distributed control necessary. Ad hoc robot communication network is still fresh field for researchers working on networking technology. This work investigates some key issues in robot ad hoc network and evaluate the challenges while establishing robot ad hoc networks

A Survey on Scheduling in IEEE 802.16 Mesh Mode

Cataloged from PDF version of article.IEEE 802.16 standard (also known as WiMAX) defines the wireless broadband network technology which aims to solve the so called last mile problem via providing high bandwidth Internet even to the rural areas for which the cable deployment is very costly. The standard mainly focuses on the MAC and PHY layer issues, supporting two transmission modes: PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an optional mode developed as an extension to PMP mode and it has the advantage of having an improving performance as more subscribers are added to the system using multi-hop routes. In 802.16 MAC protocol, mesh mode slot allocation and reservation mechanisms are left open which makes this topic a hot research area. Hence, the focus of this survey will mostly be on the mesh mode, and the proposed scheduling algorithms and performance evaluation methods

Application priority framework for fixed mobile converged communication networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases