Energy Management of Distributed Generation Systems

The book contains 10 chapters, and it is divided into four sections. The first section includes three chapters, providing an overview of Energy Management of Distributed Systems. It outlines typical concepts, such as Demand-Side Management, Demand Response, Distributed, and Hierarchical Control for Smart Micro-Grids. The second section contains three chapters and presents different control algorithms, software architectures, and simulation tools dedicated to Energy Management Systems. In the third section, the importance and the role of energy storage technology in a Distribution System, describing and comparing different types of energy storage systems, is shown. The fourth section shows how to identify and address potential threats for a Home Energy Management System. Finally, the fifth section discusses about Economical Optimization of Operational Cost for Micro-Grids, pointing out the effect of renewable energy sources, active loads, and energy storage systems on economic operation

Control and Optimization of Energy Storage in AC and DC Power Grids

Energy storage attracts attention nowadays due to the critical role it will play in the power generation and transportation sectors. Electric vehicles, as moving energy storage, are going to play a key role in the terrestrial transportation sector and help reduce greenhouse emissions. Bulk hybrid energy storage will play another critical role for feeding the new types of pulsed loads on ship power systems. However, to ensure the successful adoption of energy storage, there is a need to control and optimize the charging/discharging process, taking into consideration the customer preferences and the technical aspects. In this dissertation, novel control and optimization algorithms are developed and presented to address the various challenges that arise with the adoption of energy storage in the electricity and transportation sectors. Different decentralized control algorithms are proposed to manage the charging of a mass number of electric vehicles connected to different points of charging in the power distribution system. The different algorithms successfully satisfy the preferences of the customers without negatively impacting the technical constraints of the power grid. The developed algorithms were experimentally verified at the Energy Systems Research Laboratory at FIU. In addition to the charge control of electric vehicles, the optimal allocation and sizing of commercial parking lots are considered. A bi-layer Pareto multi-objective optimization problem is formulated to optimally allocate and size a commercial parking lot. The optimization formulation tries to maximize the profits of the parking lot investor, as well as minimize the losses and voltage deviations for the distribution system operator. Sensitivity analysis to show the effect of the different objectives on the selection of the optimal size and location is also performed. Furthermore, in this dissertation, energy management strategies of the onboard hybrid energy storage for a medium voltage direct current (MVDC) ship power system are developed. The objectives of the management strategies were to maintain the voltage of the MVDC bus, ensure proper power sharing, and ensure proper use of resources, where supercapacitors are used during the transient periods and batteries are used during the steady state periods. The management strategies were successfully validated through hardware in the loop simulation

A Silicon Carbide Based Solid-State Fault Current Limiter for Modern Power Distribution Systems

The fault current limiter represents a developing technology which will greatly improve the reliability and stability of the power grid. By reducing the magnitude of fault currents in distribution systems, fault current limiters can alleviate much of the damage imposed by these events. Solid-state fault current limiters in particular offer many improved capabilities in comparison to the power system protection equipment which is currently being used for fault current mitigation. The use of silicon carbide power semiconductor devices in solid-state fault current limiters produces a system that would help to advance the infrastructure of the electric grid. A solid-state fault current limiter utilizing silicon carbide super gate-turn off thyristors (SGTOs) and silicon carbide PiN diodes was designed, built, and tested as a technology demonstrator. The impact of using silicon carbide (SiC) devices in this application was assessed, as well as the associated design challenges. The feasibility of implementing SiC based solid-state fault current limiters for 15 kV class distribution systems was investigated in order to determine the practicality of wide-scale deployment

Blackstarting the North American power grid after a nuclear electromagnetic pulse (EMP) event or major solar storm

The electric power grid is our most critical infrastructure. This key resource provides the energy required for all other infrastructures to function. In modern times, electricity has become necessary to sustain life. The power grid in the U.S. is a target for terrorists and is vulnerable to naturally-occurring events. Numerous assessments have been performed on the vulnerability of our national power grid to both manmade and natural events.1 Two significant wide-area threats against our power grid are solar storms and electromagnetic pulse (EMP) attacks. Solar storms are naturally-occurring events that have the potential to create large-scale blackouts that could potentially affect more than 50% of the U.S. population.2 EMP attacks occur when nuclear weapons are detonated at high altitudes; although there is no threat of direct blast or radiation dangers to humans, EMP events can wreck power grids. Although numerous studies have been conducted on the effects of EMP events and solar storms on the U.S. power grid, little has been done to plan for restarting or “blackstarting” the power grid after such an event. If electricity from unaffected areas is not available, the blackstart process becomes much more challenging. The procedures required to blackstart the power grid following a wide area outage are very different from the procedures used to restart the power grid following the major but limited blackouts that have occurred to date such as the 2003 Northeast blackout. This document develops a starting point for blackstarting the U.S. power grid based on likely effects on critical infrastructures caused by solar storms and EMP events. Previous regional blackstarts were assessed to glean empirical information on aspects that could be extrapolated to a national blackstart contingenc

Advanced Solutions for Renewable Energy Integration into the Grid Addressing Intermittencies, Harmonics and Inertial Response

Numerous countries are trying to reach almost 100\% renewable penetration. Variable renewable energy (VRE), for instance wind and PV, will be the main provider of the future grid. The efforts to decrease the greenhouse gasses are promising on the current remarkable growth of grid connected photovoltaic (PV) capacity. This thesis provides an overview of the presented techniques, standards and grid interface of the PV systems in distribution and transmission level. This thesis reviews the most-adopted grid codes which required by system operators on large-scale grid connected Photovoltaic systems. The adopted topologies of the converters, the control methodologies for active - reactive power, maximum power point tracking (MPPT), as well as their arrangement in solar farms are studied. The unique L(LCL)2 filter is designed, developed and introduced in this thesis. This study will help researchers and industry users to establish their research based on connection requirements and compare between different existing technologies. Another, major aspect of the work is the development of Virtual Inertia Emulator (VIE) in the combination of hybrid energy storage system addressing major challenges with VRE implementations. Operation of a photovoltaic (PV) generating system under intermittent solar radiation is a challenging task. Furthermore, with high-penetration levels of photovoltaic energy sources being integrated into the current electric power grid, the performance of the conventional synchronous generators is being changed and grid inertial response is deteriorating. From an engineering standpoint, additional technical measures by the grid operators will be done to confirm the increasingly strict supply criteria in the new inverter dominated grid conditions. This dissertation proposes a combined virtual inertia emulator (VIE) and a hybrid battery-supercapacitor-based energy storage system . VIE provides a method which is based on power devices (like inverters), which makes a compatible weak grid for integration of renewable generators of electricity. This method makes the power inverters behave more similar to synchronous machines. Consequently, the synchronous machine properties, which have described the attributes of the grid up to now, will remain active, although after integration of renewable energies. Examples of some of these properties are grid and generator interactions in the function of a remote power dispatch, transients reactions, and the electrical outcomes of a rotating bulk mass. The hybrid energy storage system (HESS) is implemented to smooth the short-term power fluctuations and main reserve that allows renewable electricity generators such as PV to be considered very closely like regular rotating power generators. The objective of utilizing the HESS is to add/subtract power to/from the PV output in order to smooth out the high frequency fluctuations of the PV power, which may occur due to shadows of passing cloud on the PV panels. A control system designed and challenged by providing a solution to reduce short-term PV output variability, stabilizing the DC link voltage and avoiding short term shocks to the battery in terms of capacity and ramp rate capability. Not only could the suggested system overcome the slow response of battery system (including dynamics of battery, controller, and converter operation) by redirecting the power surges to the supercapacitor system, but also enhance the inertial response by emulating the kinetic inertia of synchronous generator

Virtual Power Plant Concepts for Ancillary Market - Demonstration, Development, and Validation

The increased penetration of distributed energy resources and renewables open up issues in power systems as a whole. Chapter 1 discusses these issues, and highlights the literature solutions. The concept of VPP is highlighted, different options are explored, and the use of VPP is motivated. The chapter further discusses different ancillary services, with both technical and market perspectives. It makes a clear demarcation amongst transmission and distribution level VPPs, and their economic and technical aspects. Different components within VPP are also highlighted in this chapter. The models of VPP, based on SGAM, are presented in Chapter 2, with detailed test cases. The models characterize VPP as an aggregator at TSO, VPP as DER-Aggregator/DERMS at DSO-DMS, and VPP as business case for flexibility to DSO-DMS. It includes the VPP actors, their characteristics, and a compact architecture based on SGAM. It further splits VPP participants in different software: MATLAB/Simulink, DIgSILENT, and LabVIEW for defined test cases. These are further elaborated in detail in the next chapters, and all are discussed w.r.t regulatory, technical, and economic aspects. Chapter 3 co-simulates VPP-DERMS (Distributed Energy Resource Management System as a Virtual Power Plant) based customers' DR through LabVIEW. It develops interface to customers' meters for reactive power visibility, and then develops a HMI and recording tool at VPP controller. The performance of the tool is analyzed in the chapter, which is in fact the modeling of Modbus based customers' interaction for reactive power. Chapter 4 co-simulates effects of DER on a distribution grid in DIgSILENT. A distribution grid is modelled in DIgSILENT, and then DERs are added to the network. Node voltages and line loading are analyzed in the absence and presence of unplanned DERs. Then the network is seen from two perspectives \u2013 flexibility that can be provided to TSO with STATCOM at transmission node, and flexibility that can be provided to DSO with planned DGs at distribution node. Chapter 5 co-simulates storage model in MATLAB/Simulink. It starts with the techno-economic analysis of potential storage systems, and then to realize the storage model for simulation. The model of selected storage system is implemented in MATLAB/Simulink, and then a explicit service test case is developed within VPP-aggregator to analyze the flexibility margin by storage. Next step is the integration of these co-simulators within different service platform levels. The objective of Chapter 6 is to develop an interface amongst co-simulators to simulate the VPP chain. At first step, the co-simulators are realized within tags: wind farm tags are created in DIgSILENT, customers' based tags are built in LabVIEW, and storage tags are located inside MATLAB/Simulink. Then communication amongst the co-interfaces is done by the development of Matrikon OPC server and explorer platform. The master platform is implemented in LabVIEW-RT tool. Then test cases are defined for the validation of platform, which is performed in Chapter 7. Chapter 7 is dedicated to the validation of the formulated VPPs \u2013 DERMS, business VPP, and aggregator. DERMS based model is validated within DIgSILENT, by using a portion of the Italian distribution grid. Aggregator based model is validated within DIgSILENT, by using the IEEE 9 bus transmission test model. Business VPP model is validated using IEC 61850 compliant feature of DIgSILENT for the same distribution grid in a translational manner. The validated VPP is used as an application for power system reliability, which is presented in Chapter 8. It describes the conventional schemes for power system protection, and the issues with DER penetration. It then models a VPP, and verifies its functionality for power system protection. Chapter 9 concludes the thesis

Numerical Simulations

This book will interest researchers, scientists, engineers and graduate students in many disciplines, who make use of mathematical modeling and computer simulation. Although it represents only a small sample of the research activity on numerical simulations, the book will certainly serve as a valuable tool for researchers interested in getting involved in this multidisciplinary field. It will be useful to encourage further experimental and theoretical researches in the above mentioned areas of numerical simulation

Enhanced Liposuction

Liposuction began as a simple, minimally invasive method of reducing the amount of localized fat in a region. Today it is a sophisticated and complex process, with many variations in purpose and technique. In this book, a global slate of expert surgeons offers a detailed description of various minimally invasive and non-invasive options for contouring the face, neck, and body. Chapters detail the evolution and utilization of various energy-based devices and combination treatments. They also describe procedure limitations and treatment of complications. Finally, they discuss indications for various approaches with case study descriptions so readers might be assisted with treating patients in their everyday practice

Factories of the Future

Engineering; Industrial engineering; Production engineerin