972 research outputs found
Spectral Efficient and Energy Aware Clustering in Cellular Networks
The current and envisaged increase of cellular traffic poses new challenges
to Mobile Network Operators (MNO), who must densify their Radio Access Networks
(RAN) while maintaining low Capital Expenditure and Operational Expenditure to
ensure long-term sustainability. In this context, this paper analyses optimal
clustering solutions based on Device-to-Device (D2D) communications to mitigate
partially or completely the need for MNOs to carry out extremely dense RAN
deployments. Specifically, a low complexity algorithm that enables the creation
of spectral efficient clusters among users from different cells, denoted as
enhanced Clustering Optimization for Resources' Efficiency (eCORE) is
presented. Due to the imbalance between uplink and downlink traffic, a
complementary algorithm, known as Clustering algorithm for Load Balancing
(CaLB), is also proposed to create non-spectral efficient clusters when they
result in a capacity increase. Finally, in order to alleviate the energy
overconsumption suffered by cluster heads, the Clustering Energy Efficient
algorithm (CEEa) is also designed to manage the trade-off between the capacity
enhancement and the early battery drain of some users. Results show that the
proposed algorithms increase the network capacity and outperform existing
solutions, while, at the same time, CEEa is able to handle the cluster heads
energy overconsumption
Resource Allocation for Device-to-Device Communications in Multi-Cell Multi-Band Heterogeneous Cellular Networks
Heterogeneous cellular networks (HCNs) with millimeter wave (mm-wave)
communications are considered as a promising technology for the fifth
generation mobile networks. Mm-wave has the potential to provide multiple
gigabit data rate due to the broad spectrum. Unfortunately, additional free
space path loss is also caused by the high carrier frequency. On the other
hand, mm-wave signals are sensitive to obstacles and more vulnerable to
blocking effects. To address this issue, highly directional narrow beams are
utilized in mm-wave networks. Additionally, device-to-device (D2D) users make
full use of their proximity and share uplink spectrum resources in HCNs to
increase the spectrum efficiency and network capacity. Towards the caused
complex interferences, the combination of D2D-enabled HCNs with small cells
densely deployed and mm-wave communications poses a big challenge to the
resource allocation problems. In this paper, we formulate the optimization
problem of D2D communication spectrum resource allocation among multiple
micro-wave bands and multiple mm-wave bands in HCNs. Then, considering the
totally different propagation conditions on the two bands, a heuristic
algorithm is proposed to maximize the system transmission rate and approximate
the solutions with sufficient accuracies. Compared with other practical
schemes, we carry out extensive simulations with different system parameters,
and demonstrate the superior performance of the proposed scheme. In addition,
the optimality and complexity are simulated to further verify effectiveness and
efficiency.Comment: 13 pages, 11 figures, IEEE Transactions on Vehicular Technolog
Wireless powered D2D communications underlying cellular networks: design and performance of the extended coverage
Because of the short battery life of user equipments (UEs), and the requirements for better quality of service have been more demanding, energy efficiency (EE) has emerged to be important in device-to-device (D2D) communications. In this paper, we consider a scenario, in which D2D UEs in a half-duplex decode-and-forward cognitive D2D communication underlying a traditional cellular network harvest energy and communicate with each other by using the spectrum allocated by the base station (BS). In order to develop a practical design, we achieve the optimal time switching (TS) ratio for energy harvesting. Besides that, we derive closed-form expressions for outage probability, sum-bit error rate, average EE and instantaneous rate by considering the scenario when installing the BS near UEs or far from the UEs. Two communication types are enabled by TS-based protocol. Our numerical and simulation results prove that the data rate of the D2D communication can be significantly enhanced.Web of Science58439939
Energy Efficiency in MIMO Underlay and Overlay Device-to-Device Communications and Cognitive Radio Systems
This paper addresses the problem of resource allocation for systems in which
a primary and a secondary link share the available spectrum by an underlay or
overlay approach. After observing that such a scenario models both cognitive
radio and D2D communications, we formulate the problem as the maximization of
the secondary energy efficiency subject to a minimum rate requirement for the
primary user. This leads to challenging non-convex, fractional problems. In the
underlay scenario, we obtain the global solution by means of a suitable
reformulation. In the overlay scenario, two algorithms are proposed. The first
one yields a resource allocation fulfilling the first-order optimality
conditions of the resource allocation problem, by solving a sequence of easier
fractional problems. The second one enjoys a weaker optimality claim, but an
even lower computational complexity. Numerical results demonstrate the merits
of the proposed algorithms both in terms of energy-efficient performance and
complexity, also showing that the two proposed algorithms for the overlay
scenario perform very similarly, despite the different complexity.Comment: to appear in IEEE Transactions on Signal Processin
Energy Efficiency and Sum Rate when Massive MIMO meets Device-to-Device Communication
This paper considers a scenario of short-range communication, known as
device-to-device (D2D) communication, where D2D users reuse the downlink
resources of a cellular network to transmit directly to their corresponding
receivers. In addition, multiple antennas at the base station (BS) are used in
order to simultaneously support multiple cellular users using multiuser or
massive MIMO. The network model considers a fixed number of cellular users and
that D2D users are distributed according to a homogeneous Poisson point process
(PPP). Two metrics are studied, namely, average sum rate (ASR) and energy
efficiency (EE). We derive tractable expressions and study the tradeoffs
between the ASR and EE as functions of the number of BS antennas and density of
D2D users for a given coverage area.Comment: 6 pages, 7 figures, to be presented at the IEEE International
Conference on Communications (ICC) Workshop on Device-to-Device Communication
for Cellular and Wireless Networks, London, UK, June 201
Wearable Communications in 5G: Challenges and Enabling Technologies
As wearable devices become more ingrained in our daily lives, traditional
communication networks primarily designed for human being-oriented applications
are facing tremendous challenges. The upcoming 5G wireless system aims to
support unprecedented high capacity, low latency, and massive connectivity. In
this article, we evaluate key challenges in wearable communications. A
cloud/edge communication architecture that integrates the cloud radio access
network, software defined network, device to device communications, and
cloud/edge technologies is presented. Computation offloading enabled by this
multi-layer communications architecture can offload computation-excessive and
latency-stringent applications to nearby devices through device to device
communications or to nearby edge nodes through cellular or other wireless
technologies. Critical issues faced by wearable communications such as short
battery life, limited computing capability, and stringent latency can be
greatly alleviated by this cloud/edge architecture. Together with the presented
architecture, current transmission and networking technologies, including
non-orthogonal multiple access, mobile edge computing, and energy harvesting,
can greatly enhance the performance of wearable communication in terms of
spectral efficiency, energy efficiency, latency, and connectivity.Comment: This work has been accepted by IEEE Vehicular Technology Magazin
Energy Efficiency and Sum Rate Tradeoffs for Massive MIMO Systems with Underlaid Device-to-Device Communications
In this paper, we investigate the coexistence of two technologies that have
been put forward for the fifth generation (5G) of cellular networks, namely,
network-assisted device-to-device (D2D) communications and massive MIMO
(multiple-input multiple-output). Potential benefits of both technologies are
known individually, but the tradeoffs resulting from their coexistence have not
been adequately addressed. To this end, we assume that D2D users reuse the
downlink resources of cellular networks in an underlay fashion. In addition,
multiple antennas at the BS are used in order to obtain precoding gains and
simultaneously support multiple cellular users using multiuser or massive MIMO
technique. Two metrics are considered, namely the average sum rate (ASR) and
energy efficiency (EE). We derive tractable and directly computable expressions
and study the tradeoffs between the ASR and EE as functions of the number of BS
antennas, the number of cellular users and the density of D2D users within a
given coverage area. Our results show that both the ASR and EE behave
differently in scenarios with low and high density of D2D users, and that
coexistence of underlay D2D communications and massive MIMO is mainly
beneficial in low densities of D2D users.Comment: 30 pages, 10 figures, Submitte
- …