Energy Efficient Nano Servers Provisioning for Information Piece Delivery in a Vehicular Environment

In this paper, we propose energy efficient Information Piece Delivery (IPD) through Nano Servers (NSs) in a vehicular network. Information pieces may contain any data that needs to be communicated to a vehicle. The available power (renewable or non-renewable) for a NS is variable. As a result, the service rate of a NS varies linearly with the available energy within a given range. Our proposed system therefore exhibits energy aware rate adaptation (RA), which uses variable transmission energy. We have also developed another transmission energy saving method for comparison, where sleep cycles (SC) are employed. Both methods are compared against an acceptable download time. To reduce the operational energy, we first optimise the locations of the NSs by developing a mixed integer linear programming (MILP) model, which takes into account the hourly variation of the traffic. The model is validated through a Genetic Algorithm (GA1). Furthermore, to reduce the gross delay over the entire vehicular network, the available renewable energy (wind farm) is optimally allocated to each NS according to piece demand. This, in turn, also reduces the network carbon footprint. A Genetic Algorithm (GA2) is also developed to validate the MILP results associated with this system. Through transmission energy savings, RA and SC further reduce the NSs energy consumption by 19% and 18% respectively, however at the expense of higher download time. MILP model 4 (with RA) and model 5 (with SC) reduced the delay by 81% and 83% respectively, while minimising the carbon footprint by 96% and 98% respectively, compared to the initial MILP model

Full-duplex wireless communications: challenges, solutions and future research directions

The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication

Low-latency Networking: Where Latency Lurks and How to Tame It

While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission critical communication services requiring latency in the order of milliseconds or sub-milliseconds. However, these new stringent requirements have a large technical impact on the design of all layers of the communication protocol stack. The cross layer interactions are complex due to the multiple design principles and technologies that contribute to the layers' design and fundamental performance limitations. We will be able to develop low-latency networks only if we address the problem of these complex interactions from the new point of view of sub-milliseconds latency. In this article, we propose a holistic analysis and classification of the main design principles and enabling technologies that will make it possible to deploy low-latency wireless communication networks. We argue that these design principles and enabling technologies must be carefully orchestrated to meet the stringent requirements and to manage the inherent trade-offs between low latency and traditional performance metrics. We also review currently ongoing standardization activities in prominent standards associations, and discuss open problems for future research

D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies

This document provides the most recent updates on the technical contributions and research challenges focused in WP3. Each Technology Component (TeC) has been evaluated under possible uniform assessment framework of WP3 which is based on the simulation guidelines of WP6. The performance assessment is supported by the simulation results which are in their mature and stable state. An update on the Most Promising Technology Approaches (MPTAs) and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission technologies in 5G systems has also been provided. This consolidated view is further supported in this document by the presentation of the impact of MPTAs on METIS scenarios and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Joint transceiver design and power optimization for wireless sensor networks in underground mines

Avec les grands développements des technologies de communication sans fil, les réseaux de capteurs sans fil (WSN) ont attiré beaucoup d’attention dans le monde entier au cours de la dernière décennie. Les réseaux de capteurs sans fil sont maintenant utilisés pour a surveillance sanitaire, la gestion des catastrophes, la défense, les télécommunications, etc. De tels réseaux sont utilisés dans de nombreuses applications industrielles et commerciales comme la surveillance des processus industriels et de l’environnement, etc. Un réseau WSN est une collection de transducteurs spécialisés connus sous le nom de noeuds de capteurs avec une liaison de communication distribuée de manière aléatoire dans tous les emplacements pour surveiller les paramètres. Chaque noeud de capteur est équipé d’un transducteur, d’un processeur de signal, d’une unité d’alimentation et d’un émetteur-récepteur. Les WSN sont maintenant largement utilisés dans l’industrie minière souterraine pour surveiller certains paramètres environnementaux, comme la quantité de gaz, d’eau, la température, l’humidité, le niveau d’oxygène, de poussière, etc. Dans le cas de la surveillance de l’environnement, un WSN peut être remplacé de manière équivalente par un réseau à relais à entrées et sorties multiples (MIMO). Les réseaux de relais multisauts ont attiré un intérêt de recherche important ces derniers temps grâce à leur capacité à augmenter la portée de la couverture. La liaison de communication réseau d’une source vers une destination est mise en oeuvre en utilisant un schéma d’amplification/transmission (AF) ou de décodage/transfert (DF). Le relais AF reçoit des informations du relais précédent et amplifie simplement le signal reçu, puis il le transmet au relais suivant. D’autre part, le relais DF décode d’abord le signal reçu, puis il le transmet au relais suivant au deuxième étage s’il peut parfaitement décoder le signal entrant. En raison de la simplicité analytique, dans cette thèse, nous considérons le schéma de relais AF et les résultats de ce travail peuvent également être développés pour le relais DF. La conception d’un émetteur/récepteur pour le relais MIMO multisauts est très difficile. Car à l’étape de relais L, il y a 2L canaux possibles. Donc, pour un réseau à grande échelle, il n’est pas économique d’envoyer un signal par tous les liens possibles. Au lieu de cela, nous pouvons trouver le meilleur chemin de la source à la destination qui donne le rapport signal sur bruit (SNR) de bout en bout le plus élevé. Nous pouvons minimiser la fonction objectif d’erreur quadratique moyenne (MSE) ou de taux d’erreur binaire (BER) en envoyant le signal utilisant le chemin sélectionné. L’ensemble de relais dans le chemin reste actif et le reste des relais s’éteint, ce qui permet d’économiser de l’énergie afin d’améliorer la durée de vie du réseau. Le meilleur chemin de transmission de signal a été étudié dans la littérature pour un relais MIMO à deux bonds mais est plus complexe pour un ...With the great developments in wireless communication technologies, Wireless Sensor Networks (WSNs) have gained attention worldwide in the past decade and are now being used in health monitoring, disaster management, defense, telecommunications, etc. Such networks are used in many industrial and consumer applications such as industrial process and environment monitoring, among others. A WSN network is a collection of specialized transducers known as sensor nodes with a communication link distributed randomly in any locations to monitor environmental parameters such as water level, and temperature. Each sensor node is equipped with a transducer, a signal processor, a power unit, and a transceiver. WSNs are now being widely used in the underground mining industry to monitor environmental parameters, including the amount of gas, water, temperature, humidity, oxygen level, dust, etc. The WSN for environment monitoring can be equivalently replaced by a multiple-input multiple-output (MIMO) relay network. Multi-hop relay networks have attracted significant research interest in recent years for their capability in increasing the coverage range. The network communication link from a source to a destination is implemented using the amplify-and-forward (AF) or decode-and-forward (DF) schemes. The AF relay receives information from the previous relay and simply amplifies the received signal and then forwards it to the next relay. On the other hand, the DF relay first decodes the received signal and then forwards it to the next relay in the second stage if it can perfectly decode the incoming signal. For analytical simplicity, in this thesis, we consider the AF relaying scheme and the results of this work can also be developed for the DF relay. The transceiver design for multi-hop MIMO relay is very challenging. This is because at the L-th relay stage, there are 2L possible channels. So, for a large scale network, it is not economical to send the signal through all possible links. Instead, we can find the best path from source-to-destination that gives the highest end-to-end signal-to-noise ratio (SNR). We can minimize the mean square error (MSE) or bit error rate (BER) objective function by sending the signal using the selected path. The set of relay in the path remains active and the rest of the relays are turned off which can save power to enhance network life-time. The best path signal transmission has been carried out in the literature for 2-hop MIMO relay and for multiple relaying it becomes very complex. In the first part of this thesis, we propose an optimal best path finding algorithm at perfect channel state information (CSI). We consider a parallel multi-hop multiple-input multiple-output (MIMO) AF relay system where a linear minimum mean-squared error (MMSE) receiver is used at the destination. We simplify the parallel network into equivalent series multi-hop MIMO relay link using best relaying, where the best relay ..

AN EFFICIENT INTERFERENCE AVOIDANCE SCHEME FOR DEVICE-TODEVICE ENABLED FIFTH GENERATION NARROWBAND INTERNET OF THINGS NETWOKS’

Narrowband Internet of Things (NB-IoT) is a low-power wide-area (LPWA) technology built on long-term evolution (LTE) functionalities and standardized by the 3rd-Generation Partnership Project (3GPP). Due to its support for massive machine-type communication (mMTC) and different IoT use cases with rigorous standards in terms of connection, energy efficiency, reachability, reliability, and latency, NB-IoT has attracted the research community. However, as the capacity needs for various IoT use cases expand, the LTE evolved packet core (EPC) system's numerous functionalities may become overburdened and suboptimal. Several research efforts are currently in progress to address these challenges. As a result, an overview of these efforts with a specific focus on the optimized architecture of the LTE EPC functionalities, the 5G architectural design for NB-IoT integration, the enabling technologies necessary for 5G NB-IoT, 5G new radio (NR) coexistence with NB-IoT, and feasible architectural deployment schemes of NB-IoT with cellular networks is discussed. This thesis also presents cloud-assisted relay with backscatter communication as part of a detailed study of the technical performance attributes and channel communication characteristics from the physical (PHY) and medium access control (MAC) layers of the NB-IoT, with a focus on 5G. The numerous drawbacks that come with simulating these systems are explored. The enabling market for NB-IoT, the benefits for a few use cases, and the potential critical challenges associated with their deployment are all highlighted. Fortunately, the cyclic prefix orthogonal frequency division multiplexing (CPOFDM) based waveform by 3GPP NR for improved mobile broadband (eMBB) services does not prohibit the use of other waveforms in other services, such as the NB-IoT service for mMTC. As a result, the coexistence of 5G NR and NB-IoT must be manageably orthogonal (or quasi-orthogonal) to minimize mutual interference that limits the form of freedom in the waveform's overall design. As a result, 5G coexistence with NB-IoT will introduce a new interference challenge, distinct from that of the legacy network, even though the NR's coexistence with NB-IoT is believed to improve network capacity and expand the coverage of the user data rate, as well as improves robust communication through frequency reuse. Interference challenges may make channel estimation difficult for NB-IoT devices, limiting the user performance and spectral efficiency. Various existing interference mitigation solutions either add to the network's overhead, computational complexity and delay or are hampered by low data rate and coverage. These algorithms are unsuitable for an NB-IoT network owing to the low-complexity nature. As a result, a D2D communication based interference-control technique becomes an effective strategy for addressing this problem. This thesis used D2D communication to decrease the network bottleneck in dense 5G NBIoT networks prone to interference. For D2D-enabled 5G NB-IoT systems, the thesis presents an interference-avoidance resource allocation that considers the less favourable cell edge NUEs. To simplify the algorithm's computing complexity and reduce interference power, the system divides the optimization problem into three sub-problems. First, in an orthogonal deployment technique using channel state information (CSI), the channel gain factor is leveraged by selecting a probable reuse channel with higher QoS control. Second, a bisection search approach is used to find the best power control that maximizes the network sum rate, and third, the Hungarian algorithm is used to build a maximum bipartite matching strategy to choose the optimal pairing pattern between the sets of NUEs and the D2D pairs. The proposed approach improves the D2D sum rate and overall network SINR of the 5G NB-IoT system, according to the numerical data. The maximum power constraint of the D2D pair, D2D's location, Pico-base station (PBS) cell radius, number of potential reuse channels, and cluster distance impact the D2D pair's performance. The simulation results achieve 28.35%, 31.33%, and 39% SINR performance higher than the ARSAD, DCORA, and RRA algorithms when the number of NUEs is twice the number of D2D pairs, and 2.52%, 14.80%, and 39.89% SINR performance higher than the ARSAD, RRA, and DCORA when the number of NUEs and D2D pairs are equal. As a result, a D2D sum rate increase of 9.23%, 11.26%, and 13.92% higher than the ARSAD, DCORA, and RRA when the NUE’s number is twice the number of D2D pairs, and a D2D’s sum rate increase of 1.18%, 4.64% and 15.93% higher than the ARSAD, RRA and DCORA respectively, with an equal number of NUEs and D2D pairs is achieved. The results demonstrate the efficacy of the proposed scheme. The thesis also addressed the problem where the cell-edge NUE's QoS is critical to challenges such as long-distance transmission, delays, low bandwidth utilization, and high system overhead that affect 5G NB-IoT network performance. In this case, most cell-edge NUEs boost their transmit power to maximize network throughput. Integrating cooperating D2D relaying technique into 5G NB-IoT heterogeneous network (HetNet) uplink spectrum sharing increases the system's spectral efficiency and interference power, further degrading the network. Using a max-max SINR (Max-SINR) approach, this thesis proposed an interference-aware D2D relaying strategy for 5G NB-IoT QoS improvement for a cell-edge NUE to achieve optimum system performance. The Lagrangian-dual technique is used to optimize the transmit power of the cell-edge NUE to the relay based on the average interference power constraint, while the relay to the NB-IoT base station (NBS) employs a fixed transmit power. To choose an optimal D2D relay node, the channel-to-interference plus noise ratio (CINR) of all available D2D relays is used to maximize the minimum cell-edge NUE's data rate while ensuring the cellular NUEs' QoS requirements are satisfied. Best harmonic mean, best-worst, half-duplex relay selection, and a D2D communication scheme were among the other relaying selection strategies studied. The simulation results reveal that the Max-SINR selection scheme outperforms all other selection schemes due to the high channel gain between the two communication devices except for the D2D communication scheme. The proposed algorithm achieves 21.27% SINR performance, which is nearly identical to the half-duplex scheme, but outperforms the best-worst and harmonic selection techniques by 81.27% and 40.29%, respectively. As a result, as the number of D2D relays increases, the capacity increases by 14.10% and 47.19%, respectively, over harmonic and half-duplex techniques. Finally, the thesis presents future research works on interference control in addition with the open research directions on PHY and MAC properties and a SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis presented in Chapter 2 to encourage further study on 5G NB-IoT