117 research outputs found
Interactivity And User-heterogeneity In On Demand Broadcast Video
Video-On-Demand (VOD) has appeared as an important technology for many multimedia applications such as news on demand, digital libraries, home entertainment, and distance learning. In its simplest form, delivery of a video stream requires a dedicated channel for each video session. This scheme is very expensive and non-scalable. To preserve server bandwidth, many users can share a channel using multicast. Two types of multicast have been considered. In a non-periodic multicast setting, users make video requests to the server; and it serves them according to some scheduling policy. In a periodic broadcast environment, the server does not wait for service requests. It broadcasts a video cyclically, e.g., a new stream of the same video is started every t seconds. Although, this type of approach does not guarantee true VOD, the worst service latency experienced by any client is less than t seconds. A distinct advantage of this approach is that it can serve a very large community of users using minimal server bandwidth. In VOD System it is desirable to provide the user with the video-cassette-recorder-like (VCR) capabilities such as fast-forwarding a video or jumping to a specific frame. This issue in the broadcast framework is addressed, where each video and its interactive version are broadcast repeatedly on the network. Existing techniques rely on data prefetching as the mechanism to provide this functionality. This approach provides limited usability since the prefetching rate cannot keep up with typical fast-forward speeds. In the same environment, end users might have access to different bandwidth capabilities at different times. Current periodic broadcast schemes, do not take advantage of high-bandwidth capabilities, nor do they adapt to the low-bandwidth limitation of the receivers. A heterogeneous technique is presented that can adapt to a range of receiving bandwidth capability. Given a server bandwidth and a range of different client bandwidths, users employing the proposed technique will choose either to use their full reception bandwidth capability and therefore accessing the video at a very short time, or using part or enough reception bandwidth at the expense of a longer access latency
JTEC panel on display technologies in Japan
This report is one in a series of reports that describes research and development efforts in Japan in the area of display technologies. The following are included in this report: flat panel displays (technical findings, liquid crystal display development and production, large flat panel displays (FPD's), electroluminescent displays and plasma panels, infrastructure in Japan's FPD industry, market and projected sales, and new a-Si active matrix liquid crystal display (AMLCD) factory); materials for flat panel displays (liquid crystal materials, and light-emissive display materials); manufacturing and infrastructure of active matrix liquid crystal displays (manufacturing logistics and equipment); passive matrix liquid crystal displays (LCD basics, twisted nematics LCD's, supertwisted nematic LCD's, ferroelectric LCD's, and a comparison of passive matrix LCD technology); active matrix technology (basic active matrix technology, investment environment, amorphous silicon, polysilicon, and commercial products and prototypes); and projection displays (comparison of Japanese and U.S. display research, and technical evaluation of work)
Optical Communication
Optical communication is very much useful in telecommunication systems, data processing and networking. It consists of a transmitter that encodes a message into an optical signal, a channel that carries the signal to its desired destination, and a receiver that reproduces the message from the received optical signal. It presents up to date results on communication systems, along with the explanations of their relevance, from leading researchers in this field. The chapters cover general concepts of optical communication, components, systems, networks, signal processing and MIMO systems. In recent years, optical components and other enhanced signal processing functions are also considered in depth for optical communications systems. The researcher has also concentrated on optical devices, networking, signal processing, and MIMO systems and other enhanced functions for optical communication. This book is targeted at research, development and design engineers from the teams in manufacturing industry, academia and telecommunication industries
Mirror - Vol. 33, No. 09 - November 01, 2007
[PLEASE NOTE: this issue of the newspaper contains a Sectiion B, the Basketball Preview] The Mirror (sometimes called the Fairfield Mirror) is the official student newspaper of Fairfield University, and is published weekly during the academic year (September - May). It runs from 1977 - the present; current issues are available online.https://digitalcommons.fairfield.edu/archives-mirror/1723/thumbnail.jp
Proceedings of the Fifth International Mobile Satellite Conference 1997
Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments
Recommended from our members
Design and Linearization of Energy Efficiency Power Amplifier in Nonlinear OFDM Transmitter for LTE-5G Applications. Simulation and measurements of energy efficiency power amplifier in the presence of nonlinear OFDM transmitter system and digital predistortion based on Hammerstein-Wiener method
This research work has made an effort to understand a novel line of radio frequency
power amplifiers (RFPAs) that address initiatives for efficiency enhancement and
linearity compensation to harmonize the fifth generation (5G) campaign. The objective
is to enhance the performance of an orthogonal frequency division multiplexing-long
term evolution (OFDM-LTE) transmitter by reducing the nonlinear distortion of the
RFPA.
The first part of this work explores the design and implementation of 15.5 W class AB
RF power amplifier, adopting a balanced technique to stimulate efficiency enhancement
and redeeming exhibition of excessive power in the transmitter. Consequently, this work
goes beyond improving efficiency over a linear RF power amplifier design; in which a
comprehensive investigation on the fundamental and harmonic components of class F
RF power amplifier using a load-pull approach to realise an optimum load impedance
and the matching network is presented. The frequency bandwidth for both amplifiers was
allocated to operate in the 2.620-2.690 GHz of mobile LTE applications.
The second part explores the development of the behavioural model for the class AB
power amplifier. A particular novel, Hammerstein-Wiener based model is proposed to
describe the dynamic nonlinear behaviour of the power amplifier. The RF power amplifier
nonlinear distortion is approximated using a new linear parameter approximation
approach. The first and second-order Hammerstein-Wiener using the Normalised Least
Mean Square Error (NLMSE) algorithm is used with the aim of easing the complexity of
filtering process during linear memory cancellation. Moreover, an enhanced adaptive
Wiener model is proposed to explore the nonlinear memory effect in the system. The
proposed approach is able to balance between convergence speed and high-level
accuracy when compared with behavioural modelling algorithms that are more complex
in computation.
Finally, the adaptive predistorter technique is implemented and verified in the OFDM
transceiver test-bed. The results were compared against the computed one from
MATLAB simulation for OFDM and 5G modulation transmitters. The results have
confirmed the reliability of the model and the effectiveness of the proposed predistorter.FundacĂŁo para a CiĂȘncia e a Tecnologia, Portugal, under
European Unionâs Horizon 2020 research and innovation programme ... grant agreement H2020-MSCA-ITN- 2016 SECRET-722424
I also acknowledge the role of the National Space Research and Development Agency (NASRDA)
Sokoto State Government
Petroleum Technology Trust Fund (PTDF
An aesthetic for sustainable interactions in product-service systems?
Copyright @ 2012 Greenleaf PublishingEco-efficient Product-Service System (PSS) innovations represent a promising approach to sustainability. However the application of this concept is still very limited because its implementation and diffusion is hindered by several barriers (cultural, corporate and regulative ones). The paper investigates the barriers that affect the attractiveness and acceptation of eco-efficient PSS alternatives, and opens the debate on the aesthetic of eco-efficient PSS, and the way in which aesthetic could enhance some specific inner qualities of this kinds of innovations. Integrating insights from semiotics, the paper outlines some first research hypothesis on how the aesthetic elements of an eco-efficient PSS could facilitate user attraction, acceptation and satisfaction
NASA Tech Briefs, Winter 1982
Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology. New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences
Magnetic Tape Recording for the Eighties
The practical and theoretical aspects of state-of-the-art magnetic tape recording technology are reviewed. Topics covered include the following: (1) analog and digital magnetic tape recording, (2) tape and head wear, (3) wear testing, (4) magnetic tape certification, (5) care, handling, and management of magnetic tape, (6) cleaning, packing, and winding of magnetic tape, (7) tape reels, bands, and packaging, (8) coding techniques for high-density digital recording, and (9) tradeoffs of coding techniques
- âŠ