Prediction of performance of the DVB-SH system relying on mutual information

DVB-SH (Digital Video Broadcasting-Satellite Handled) is a broadcasting standard dedicated to hybrid broadcasting systems combining a satellite and a terrestrial part. On the satellite part, dedicated interleaving and time slicing mechanisms are proposed to mitigate the effects of Land Mobile Satellite (LMS) channel, based on a convolutional interleaver. Depending on the parameters of this interleaver, this mechanism enables to split in time a codeword on duration from 100 ms to about 30s. This mechanism signi?cantly improves the error recovery performance of the code but in literature, exact evaluation at system level of this improvement is missing. The objective of this paper is to propose a prediction method compatible with fast simulations, to quantitatively evaluate the system performance in terms of Packet Error Rate (PER). The main dif?culty is to evaluate the decoding probability of a codeword submitted to several levels of attenuation. The method we propose consists in using as metric the Mutual Information (MI) between coded bit at the emitter side and the received symbol. It is shown that, by averaging the MI over the codeword and by using the decoding performance function g such that PER=g(MI)determined on the Gaussian channel, we can signi?cantly improve the precision of the prediction compared to the two other methods based on SNR and Bit Error Rate (BER). We evaluated these methods on three arti?cial channels where each codeword is transmitted with three or four different levels of attenuations. The prediction error of the SNR-based (resp. the input BER-based) method varies from 0.5 to 1.7 dB (resp. from 0.7 to 1.2 dB) instead of the MI-based method achieves a precision in the order of 0.1 dB in the three cases. We then evaluate this method on real LMS channels with various DVB-SH interleavers and show that the instantaneous PER can also be predicted with high accuracy

Making hierarchical modulation more flexible

In a broadcast system using the hierarchical modulation, the system delivers several streams with different waveforms and required Signal-to-Noise Ratio (SNR), typically SD- TV and HD-TV. At the application layer, each stream is delivered with a particular rate. The physical layer must be defined in order to optimize the protection of each stream with respect to the double constraints of both the data rates and the SNR thresholds. We show in this paper that a standard like DVB-SH is not always well adapted to meet these system constraints in operational typical cases. After exposing the current limitations of a classical hierarchical modulation approach, we present two possible adaptations to address these operational requirements and offer more flexibility in hierarchical modulation design

Technical Solutions for Local Service Insertion in DVB-NGH Single Frequency Networks

Current digital terrestrial television networks make use of either single frequency networks (SFN) or multifrequency networks (MFN). These network topologies are not ideally suited for delivery of both global and local services in an efficient way. MFNs enable the efficient transmission of local services but need a significant amount of frequency spectrum. The basic principle of SFNs is that all transmitters radiate the same signal synchronized in time and frequency, therefore are especially suitable for global services due to mutual support of the signal by multiple transmitters. Without violating the SFN principle, local services meant to address sub-regions of an SFN must therefore be transmitted throughout the whole network, causing inefficient distribution of local services. This paper describes the complementary techniques adopted by the next generation mobile broadcasting standard digital video broadcasting - next generation handheld for providing global and local contents in SFN topologies: hierarchical modulation (H-LSI) and orthogonal local services insertion (O-LSI) techniques. H-LSI uses hierarchical modulation to transmit local services on top of the global services in areas close to the transmitters, by transmitting the local services in the low priority stream and the global services in the high priority stream. The O-LSI scheme specifies groups of OFDM subcarriers in specific OFDM symbols for the exclusive use of particular transmitters to transmit local services. For both techniques, the transmission of local content through the whole SFN network can be scheduled in a way that different local areas do not interfere with each other. In addition to the description of both H-LSI and O-LSI schemes, the applicability of these approaches in terms of network topologies, implementation issues, and performance evaluation are analyzed.López Sánchez, J.; Zöllner, J.; Atungsiri, S.; Stare, E.; Gómez Barquero, D. (2014). Technical Solutions for Local Service Insertion in DVB-NGH Single Frequency Networks. IEEE Transactions on Broadcasting. 60(2):293-301. doi:10.1109/TBC.2014.2322502S29330160

Evaluation of Error Correcting Code performances of a free space optical communication system between LEO satellite and Ground Station

Optical communication between LEO satellite and optical ground station creates the opportunity to highly increase the transmitted data rate. The propagation channel has specificities that imply the potential use of error correcting code (ECC) and interleaving at physical and higher layer. A physical layer simulator designed to investigate the performance of the combination of ECC and interleaving in presence of various channel scenarios and receiver architectures is presented here. The simulator emulates signal generation, propagation impairments by the use of dedicated optical attenuation time series provided by state of the art wave optics results and the effect of receiver front-ends with various detection methods. Mutual information (MI) is computed in order to approximate ECC performances. Various receiver architectures and channel scenarios were studied. Among others, direct coupling of the received signal into the photo-detector (PD) or the use of pre-amplified receiver with single mode fiber (SSMF) coupling and optical amplification prior to the detection were considered. Several receiver architectures were considered: the use of a wide field-of-view detector, SSMF coupling with a single tip/tilt correction or with higher order adaptive optics correction. Two modulations of OOK and DBPSK along with various detection methods were examined. The tuning of ECC parameters was studied through the computation of mutual information. Additionally, the two cases of physical and higher layer interleaving were implemented providing an excellent diversity to the channel seen by the codeword of ECC

A novel network architecture for train-to-wayside communication with quality of service over heterogeneous wireless networks

In the railway industry, there are nowadays different actors who would like to send or receive data from the wayside to an onboard device or vice versa. These actors are e.g., the Train Operation Company, the Train Constructing Company, a Content Provider, etc. This requires a communication module on each train and at the wayside. These modules interact with each other over heterogeneous wireless links. This system is referred to as the Train-to-Wayside Communication System (TWCS). While there are already a lot of deployments using a TWCS, the implementation of quality of service, performance enhancing proxies (PEP) and the network mobility functions have not yet been fully integrated in TWCS systems. Therefore, we propose a novel and modular IPv6-enabled TWCS architecture in this article. It jointly tackles these functions and considers their mutual dependencies and relationships. DiffServ is used to differentiate between service classes and priorities. Virtual local area networks are used to differentiate between different service level agreements. In the PEP, we propose to use a distributed TCP accelerator to optimize bandwidth usage. Concerning network mobility, we propose to use the SCTP protocol (with Dynamic Address Reconfiguration and PR-SCTP extensions) to create a tunnel per wireless link, in order to support the reliable transmission of data between the accelerators. We have analyzed different design choices, pinpointed the main implementation challenges and identified candidate solutions for the different modules in the TWCS system. As such, we present an elaborated framework that can be used for prototyping a fully featured TWCS

Enhancing satellite system throughput using adaptive HARQ for delay tolerant services in mobile communications

In this paper we propose the introduction of adaptive hybrid automatic repeat request (HARQ) in the context of mobile satellite communications. HARQ schemes which are commonly used in terrestrial links, can be adapted to improve the throughput for delay tolerant services. The proposed method uses the estimation of the mutual information between the received and the sent symbols, in order to estimate the number of bits necessary to decode the message at next transmission. We evaluate the performance of our method by simulating a land mobile satellite (LMS) channel. We compare our results with the static HARQ scheme, showing that our adaptive retransmission technique has better efficiency while keeping an acceptable delay for services

Laboratory and field trials evaluation of transmit delay Diversity applied to DVB-T/H networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The requirements for future DVB-T/H networks demand that broadcasters design and deploy networks that provide ubiquitous reception in challenging indoors and other obstructed situations. It is essential that such networks are designed cost-effectively and with minimized environmental impact. The use of transmit diversity techniques with multiple antennas have long been proposed to improve the performance and capacity of wireless systems. Transmit diversity exploits the scattering effect inherent in the channel by means of transmitting multiple signals in a controlled manner from spatially separated antennas, allowing independently faded signals to arrive at the receiver and improves the chances of decoding a signal of acceptable quality. Transmit diversity can complement receive diversity by adding an additional diversity gain and in situations where receiver diversity is not practical, transmit diversity alone delivers a comparable amount of diversity gain. Transmit Delay Diversity (DD) can be applied to systems employing the DVB standard without receiver equipment modifications. Although transmit DD can provide a gain in NLOS situations, it can introduce degradation in LOS situation. The aim of this thesis is to investigate the effectiveness in real-word applications of novel diversity techniques for broadcast transmitter networks. Tests involved laboratory experiments using a wireless MIMO channel emulator and the deployment of a field measurement campaign dedicated to driving, indoor and rooftop reception. The relationship between the diversity gain, the propagation environment and several parameters such as the transmit antenna separation, the receiver speed and the Forward Error Correction Codes (FEC) configuration are investigated. Results includes the effect of real-word parameter usually not modeled in the software simulation analysis, such as antenna radiation patterns and mutual coupling, scattering vegetation impact, non-Gaussian noise sources and receiver implementation. Moreover, a practical analysis of the effectiveness of experimental techniques to mitigate the loss due to transmit DD loss in rooftop reception is presented. The results of this thesis confirmed, completed and extended the existing predictions with real word measurement results

Optimization of a Coded-Modulation System with Shaped Constellation

Conventional communication systems transmit signals that are selected from a signal constellation with uniform probability. However, information-theoretic results suggest that performance may be improved by shaping the constellation such that lower-energy signals are selected more frequently than higher-energy signals. This dissertation presents an energy efficient approach for shaping the constellations used by coded-modulation systems. The focus is on designing shaping techniques for systems that use a combination of amplitude phase shift keying (APSK) and low-density parity check (LDPC) coding. Such a combination is typical of modern satellite communications, such as the system used by the DVB-S2 standard.;The system implementation requires that a subset of the bits at the output of the LDPC encoder are passed through a nonlinear shaping encoder whose output bits are more likely to be a zero than a one. The constellation is partitioned into a plurality of sub-constellations, each with a different average signal energy, and the shaping bits are used to select the sub-constellation. An iterative receiver exchanges soft information among the demodulator, LDPC decoder, and shaping decoder. Parameters associated with the modulation and shaping code are optimized with respect to information rate, while the design of the LDPC code is optimized for the shaped modulation with the assistance of extrinsic-information transfer (EXIT) charts. The rule for labeling the constellation with bits is optimized using a novel hybrid cost function and a binary switching algorithm.;Simulation results show that the combination of constellation shaping, LDPC code optimization, and optimized bit labeling can achieve a gain in excess of 1 dB in an additive white Gaussian noise (AWGN) channel at a rate of 3 bits/symbol compared with a system that adheres directly to the DVB-S2 standard