Is the timed-up and go test feasible in mobile devices? A systematic review

The number of older adults is increasing worldwide, and it is expected that by 2050 over 2 billion individuals will be more than 60 years old. Older adults are exposed to numerous pathological problems such as Parkinson’s disease, amyotrophic lateral sclerosis, post-stroke, and orthopedic disturbances. Several physiotherapy methods that involve measurement of movements, such as the Timed-Up and Go test, can be done to support efficient and effective evaluation of pathological symptoms and promotion of health and well-being. In this systematic review, the authors aim to determine how the inertial sensors embedded in mobile devices are employed for the measurement of the different parameters involved in the Timed-Up and Go test. The main contribution of this paper consists of the identification of the different studies that utilize the sensors available in mobile devices for the measurement of the results of the Timed-Up and Go test. The results show that mobile devices embedded motion sensors can be used for these types of studies and the most commonly used sensors are the magnetometer, accelerometer, and gyroscope available in off-the-shelf smartphones. The features analyzed in this paper are categorized as quantitative, quantitative + statistic, dynamic balance, gait properties, state transitions, and raw statistics. These features utilize the accelerometer and gyroscope sensors and facilitate recognition of daily activities, accidents such as falling, some diseases, as well as the measurement of the subject's performance during the test execution.info:eu-repo/semantics/publishedVersio

Classification of sporting activities using smartphone accelerometers

In this paper we present a framework that allows for the automatic identification of sporting activities using commonly available smartphones. We extract discriminative informational features from smartphone accelerometers using the Discrete Wavelet Transform (DWT). Despite the poor quality of their accelerometers, smartphones were used as capture devices due to their prevalence in today’s society. Successful classification on this basis potentially makes the technology accessible to both elite and non-elite athletes. Extracted features are used to train different categories of classifiers. No one classifier family has a reportable direct advantage in activity classification problems to date; thus we examine classifiers from each of the most widely used classifier families. We investigate three classification approaches; a commonly used SVM-based approach, an optimized classification model and a fusion of classifiers. We also investigate the effect of changing several of the DWT input parameters, including mother wavelets, window lengths and DWT decomposition levels. During the course of this work we created a challenging sports activity analysis dataset, comprised of soccer and field-hockey activities. The average maximum F-measure accuracy of 87% was achieved using a fusion of classifiers, which was 6% better than a single classifier model and 23% better than a standard SVM approach

Seeking Optimum System Settings for Physical Activity Recognition on Smartwatches

Physical activity recognition (PAR) using wearable devices can provide valued information regarding an individual's degree of functional ability and lifestyle. In this regards, smartphone-based physical activity recognition is a well-studied area. Research on smartwatch-based PAR, on the other hand, is still in its infancy. Through a large-scale exploratory study, this work aims to investigate the smartwatch-based PAR domain. A detailed analysis of various feature banks and classification methods are carried out to find the optimum system settings for the best performance of any smartwatch-based PAR system for both personal and impersonal models. To further validate our hypothesis for both personal (The classifier is built using the data only from one specific user) and impersonal (The classifier is built using the data from every user except the one under study) models, we tested single subject validation process for smartwatch-based activity recognition.Comment: 15 pages, 2 figures, Accepted in CVC'1

Context-awareness for mobile sensing: a survey and future directions

The evolution of smartphones together with increasing computational power have empowered developers to create innovative context-aware applications for recognizing user related social and cognitive activities in any situation and at any location. The existence and awareness of the context provides the capability of being conscious of physical environments or situations around mobile device users. This allows network services to respond proactively and intelligently based on such awareness. The key idea behind context-aware applications is to encourage users to collect, analyze and share local sensory knowledge in the purpose for a large scale community use by creating a smart network. The desired network is capable of making autonomous logical decisions to actuate environmental objects, and also assist individuals. However, many open challenges remain, which are mostly arisen due to the middleware services provided in mobile devices have limited resources in terms of power, memory and bandwidth. Thus, it becomes critically important to study how the drawbacks can be elaborated and resolved, and at the same time better understand the opportunities for the research community to contribute to the context-awareness. To this end, this paper surveys the literature over the period of 1991-2014 from the emerging concepts to applications of context-awareness in mobile platforms by providing up-to-date research and future research directions. Moreover, it points out the challenges faced in this regard and enlighten them by proposing possible solutions

Validation of smartphone step count algorithm used in STARFISH smartphone application

BACKGROUND: Smartphone sensors are underutilised in rehabilitation. OBJECTIVE: To validate the step count algorithm used in the STARFISH smartphone application. METHODS: Twenty-two healthy adults (8 male, 14 female) walked on a treadmill for 5 minutes at 0.44, 0.67, 0.90 and 1.33 m⋅s-1 . Each wore an activPAL TM and four Samsung Galaxy S3TM smartphones, with the STARFISH application running, in: 1) a belt carrycase, 2) a trouser or skirt pocket), 3a) a handbag on shoulder for females or 3b) shirt pocket for males and 4) an upper arm strap. Step counts of the STARFISH application and the activPALTM were compared at corresponding speeds and Bland-Altman statistics used to assess level of agreement (LOA). RESULTS: The LOA between the STARFISH application and activPALTM varied across the four speeds and positions, but improved as speed increased. The LOA ranged from 105–177% at 0.44 m⋅s-1; 50–98% at 0.67 m⋅s-1; 19–67% at 0.9 m⋅s-1 and 8–53% at 1.33 m⋅s-1. The best LOAs were at 1.33 m⋅s-1 in the shirt pocket (8%) and upper arm strap (12%) positions. CONCLUSIONS: Step counts measured by the STARFISH smartphone application are valid in most body positions especially at walking speeds of 0.9 m⋅s-1 and above

Human activity recognition for static and dynamic activity using convolutional neural network

Evaluated activity as a detail of the human physical movement has become a leading subject for researchers. Activity recognition application is utilized in several areas, such as living, health, game, medical, rehabilitation, and other smart home system applications. An accelerometer was popular sensors to recognize the activity, as well as a gyroscope, which can be embedded in a smartphone. Signal was generated from the accelerometer as a time-series data is an actual approach like a human actifvity pattern. Motion data have acquired in 30 volunteers. Dynamic actives (walking, walking upstairs, walking downstairs) as DA and static actives (laying, standing, sitting) as SA were collected from volunteers. SA and DA it's a challenging problem with the different signal patterns, SA signals coincide between activities but with a clear threshold, otherwise the DA signal is clearly distributed but with an adjacent upper threshold. The proposed network structure achieves a significant performance with the best overall accuracy of 97%. The result indicated the ability of the model for human activity recognition purposes

Completely Automated Public Physical test to tell Computers and Humans Apart: A usability study on mobile devices

A very common approach adopted to fight the increasing sophistication and dangerousness of malware and hacking is to introduce more complex authentication mechanisms. This approach, however, introduces additional cognitive burdens for users and lowers the whole authentication mechanism acceptability to the point of making it unusable. On the contrary, what is really needed to fight the onslaught of automated attacks to users data and privacy is to first tell human and computers apart and then distinguish among humans to guarantee correct authentication. Such an approach is capable of completely thwarting any automated attempt to achieve unwarranted access while it allows keeping simple the mechanism dedicated to recognizing the legitimate user. This kind of approach is behind the concept of Completely Automated Public Turing test to tell Computers and Humans Apart (CAPTCHA), yet CAPTCHA leverages cognitive capabilities, thus the increasing sophistication of computers calls for more and more difficult cognitive tasks that make them either very long to solve or very prone to false negatives. We argue that this problem can be overcome by substituting the cognitive component of CAPTCHA with a different property that programs cannot mimic: the physical nature. In past work we have introduced the Completely Automated Public Physical test to tell Computer and Humans Apart (CAPPCHA) as a way to enhance the PIN authentication method for mobile devices and we have provided a proof of concept implementation. Similarly to CAPTCHA, this mechanism can also be used to prevent automated programs from abusing online services. However, to evaluate the real efficacy of the proposed scheme, an extended empirical assessment of CAPPCHA is required as well as a comparison of CAPPCHA performance with the existing state of the art. To this aim, in this paper we carry out an extensive experimental study on both the performance and the usability of CAPPCHA involving a high number of physical users, and we provide comparisons of CAPPCHA with existing flavors of CAPTCHA

Anticipatory Mobile Computing: A Survey of the State of the Art and Research Challenges

Today's mobile phones are far from mere communication devices they were ten years ago. Equipped with sophisticated sensors and advanced computing hardware, phones can be used to infer users' location, activity, social setting and more. As devices become increasingly intelligent, their capabilities evolve beyond inferring context to predicting it, and then reasoning and acting upon the predicted context. This article provides an overview of the current state of the art in mobile sensing and context prediction paving the way for full-fledged anticipatory mobile computing. We present a survey of phenomena that mobile phones can infer and predict, and offer a description of machine learning techniques used for such predictions. We then discuss proactive decision making and decision delivery via the user-device feedback loop. Finally, we discuss the challenges and opportunities of anticipatory mobile computing.Comment: 29 pages, 5 figure