A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead

Physical layer security which safeguards data confidentiality based on the information-theoretic approaches has received significant research interest recently. The key idea behind physical layer security is to utilize the intrinsic randomness of the transmission channel to guarantee the security in physical layer. The evolution towards 5G wireless communications poses new challenges for physical layer security research. This paper provides a latest survey of the physical layer security research on various promising 5G technologies, including physical layer security coding, massive multiple-input multiple-output, millimeter wave communications, heterogeneous networks, non-orthogonal multiple access, full duplex technology, etc. Technical challenges which remain unresolved at the time of writing are summarized and the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication

On the MIMO Capacity for Distributed System under Composite Rayleigh/Rician Fading and Shadowing

Wireless channels are commonly affected by short-term fading and long-term fading (shadowing). The shadowing effects must be taken into account also when mobility is present in the wireless scenario. Using a composite fading model, the total channel capacity can be studied for a scenario with short-term Rayleigh fading along with shadowing. This work provides quantitative results for these kinds of scenarios with Rayleigh fading and shadowing, considering also multiple-input and multiple-output systems, which have not been previously reported. In addition, the channel capacity has been studied in depth in its relation with the shadowing level, signal to noise ratio, and the number of elements in the multiple-input and multiple-output system. Moreover, the channel performance with shadowing has been compared to the one without it. Furthermore, Rician model with shadowing is studied and its results are reported. In addition, correlated and experimental results are provided. It is identified that the distributed MIMO systems can benefit from shadowing in Rician channels. This advantage has not been reported previously. This type of fading is proposed for massive MIMO by others and our results open the door to emulate massive MIMO on a reverberation chamber.This work has been supported by “Gobierno de Extremadura” with project number IB13113, PYR-2014 GENIL project (PYR-2014-CEB09-0010/MICINN), and CEIbioTIC project (mP_TIC_11)

OFDM comparison with FFT and DWT processing for DVB-T2 wireless channels

Introduction− Recent studies on the FFT processing (Fast Fourier Transform) or DWT (Discrete Wavelet Transform) of the OFDM signal (Orthogonal Frequency Division Multiplexing) have shown pros and cons for DVB-T2 (Digital Video Broadcasting-Second Generation Terrestrial) radio communications; however, the benefits of both types of processing have yet to be compared for the same scenario. Objective− The objective of this research is to compare the response of the wireless channel with AWGN noise (Additive White Gaussian Noise Channel) and Rayleigh and Rician fading in the UHF (Ultra High Frequency) bandMethodology−The transmission of DVB-T2 information with OFDM modulation and FFT and DWT processing was simulated in Matlab®, specifically in Simulink. Results− The results of the study proved to be more ef-ficient for DWT system than FFT system, due to the low rate of erroneous bits, spectral efficiency and reduction of the Peak-to-Average Power Ratio (PAPR), for Eb / No relations greater than 10dB. Conclusions−In this article, we present the designs of both systems and the results of the research experience; likewise, the practical applicability of these systems is discussed, and improvements are suggested for future work.Introducción− Recientes estudios sobre el procesado FFT (Fast Fourier Transform) o DWT (Discrete Wavelet Transform) de la señal OFDM (Orthogonal Frequency Di-vision Multiplexing) han demostrado pros y contras para comunicaciones de radio DVB-T2 (Digital Video Broad-casting – Second Generation Terrestrial); sin embargo, aún falta comparar las prestaciones de ambos tipos de procesamiento para el mismo escenario. Objetivo− El objetivo de esta investigación es comparar la respuesta del canal inalámbrico con ruido AWGN (Ad-ditive White Gaussian Noise Channel) y desvanecimiento Rayleigh y Rician en la banda de UHF (Ultra High Fre-quency).Metodología− Se simuló en Matlab®, específicamente en Simulink, la transmisión de información DVB-T2 con modulación OFDM y procesado FFT y DWT. Resultados− Los resultados del estudio demostraron ser más eficientes para el sistema DWT en comparación con el Sistema FFT, por la baja tasa de bits errados, eficiencia espectral y reducción del cociente entre la potencia pico a promedio (PAPR: Peak-to-Average Power Ratio), para relaciones Eb/No mayores a 10dB. Conclusiones− En este artículo se presentan los diseños de ambos sistemas y los resultados de la experiencia de investigación; así mismo, se discute la aplicabilidad práctica de estos sistemas y se sugieren mejoras para trabajos futuros

Comparación OFDM con procesado FFT y DWT para canales inalámbricos DVB-T2

Introduction: Recent studies on the FFT processing (Fast Fourier Transform) or DWT (Discrete Wavelet Transform) of the OFDM signal (Orthogonal Frequency Division Multiplexing) have shown pros and cons for DVB-T2 (Digital Video Broadcasting-Second Generation Terrestrial) radio communications; however, the benefits of both types of processing have yet to be compared for the same scenario. Objective: The objective of this research is to compare the response of the wireless channel with AWGN noise (Additive White Gaussian Noise Channel) and Rayleigh and Rician fading in the UHF (Ultra High Frequency) band. Methodology: The transmission of DVB-T2 information with OFDM modulation and FFT and DWT processing was simulated in Matlab®, specifically in Simulink. Results: The results of the study proved to be more efficient for DWT system than FFT system, due to the low rate of erroneous bits, spectral efficiency and reduction of the Peak-to-Average Power Ratio (PAPR), for Eb / No relations greater than 10dB. Conclusions: In this article, we present the designs of both systems and the results of the research experience; likewise, the practical applicability of these systems is discussed, and improvements are suggested for future work.Introducción: Recientes estudios sobre el procesado FFT (Fast Fourier Transform) o DWT (Discrete Wavelet Transform) de la señal OFDM (Orthogonal Frequency Division Multiplexing) han demostrado pros y contras para comunicaciones de radio DVB-T2 (Digital Video Broadcasting – Second Generation Terrestrial); sin embargo, aún falta comparar las prestaciones de ambos tipos de procesamiento para el mismo escenario. Objetivo: El objetivo de esta investigación es comparar la respuesta del canal inalámbrico con ruido AWGN (Additive White Gaussian Noise Channel) y desvanecimiento Rayleigh y Rician en la banda de UHF (Ultra High Frequency). Metodología: Se simuló en Matlab®, específicamente en Simulink, la transmisión de información DVB-T2 con modulación OFDM y procesado FFT y DWT. Resultados: Los resultados del estudio demostraron ser más eficientes para el sistema DWT en comparación con el Sistema FFT, por la baja tasa de bits errados, eficiencia espectral y reducción del cociente entre la potencia pico a promedio (PAPR: Peak-to-Average Power Ratio), para relaciones Eb/No mayores a 10dB. Conclusiones: En este artículo se presentan los diseños de ambos sistemas y los resultados de la experiencia de investigación; así mismo, se discute la aplicabilidad práctica de estos sistemas y se sugieren mejoras para trabajos futuros

Low Complexity Energy-Efficient Collaborative Spectrum Sensing for Cognitive Radio Networks

Clustering approach is considered a management technology that arranged the distributed cognitive radio users into logical groups to improve the sensing performance of the network. A lot of works in this area showed that cluster-based spectrum sensing (CBSS) technique efficiently tackled the trade-off between performance and overhead issue. By employing the tree structure of the cluster, a multilevel hierarchical cluster-based spectrum sensing (MH-CBSS) algorithm was proposed to compromise between the gained performance and incurred overhead. However, the MH-CBSS iterative algorithm incurs high computational requirements. In this thesis, an energy-efficient low computational hierarchical cluster-based algorithm is proposed which reduces the incurred computational burden. This is achieved by predetermining the number of cognitive radios (CRs) in the cluster, which provides an advantage of reducing the number of iterations of the MH-CBSS algorithm. Furthermore, for a comprehensive study, the modified algorithm is investigated over both Rayleigh and Nakagami fading channels. Simulation results show that the detection performance of the modified algorithm outperforms the MH-CBSS algorithm over Rayleigh and Nakagami fading channels. In addition, a conventional energy detection algorithm is a fixed threshold based algorithm. Therefore, the threshold should be selected properly since it significantly affects the sensing performance of energy detector. For this reason, an energy-efficient hierarchical cluster-based cooperative spectrum sensing algorithm with an adaptive threshold is proposed which enables the CR dynamically adapts its threshold to achieve the minimum total cluster error. Besides, the optimal threshold level for minimizing the overall cluster detection error rate is numerically determined. The detection performance of the proposed algorithm is presented and evaluated through simulation results

Multi-Antenna Cooperative Wireless Systems: A Diversity-Multiplexing Tradeoff Perspective

We consider a general multiple antenna network with multiple sources, multiple destinations and multiple relays in terms of the diversity-multiplexing tradeoff (DMT). We examine several subcases of this most general problem taking into account the processing capability of the relays (half-duplex or full-duplex), and the network geometry (clustered or non-clustered). We first study the multiple antenna relay channel with a full-duplex relay to understand the effect of increased degrees of freedom in the direct link. We find DMT upper bounds and investigate the achievable performance of decode-and-forward (DF), and compress-and-forward (CF) protocols. Our results suggest that while DF is DMT optimal when all terminals have one antenna each, it may not maintain its good performance when the degrees of freedom in the direct link is increased, whereas CF continues to perform optimally. We also study the multiple antenna relay channel with a half-duplex relay. We show that the half-duplex DMT behavior can significantly be different from the full-duplex case. We find that CF is DMT optimal for half-duplex relaying as well, and is the first protocol known to achieve the half-duplex relay DMT. We next study the multiple-access relay channel (MARC) DMT. Finally, we investigate a system with a single source-destination pair and multiple relays, each node with a single antenna, and show that even under the idealistic assumption of full-duplex relays and a clustered network, this virtual multi-input multi-output (MIMO) system can never fully mimic a real MIMO DMT. For cooperative systems with multiple sources and multiple destinations the same limitation remains to be in effect.Comment: version 1: 58 pages, 15 figures, Submitted to IEEE Transactions on Information Theory, version 2: Final version, to appear IEEE IT, title changed, extra figures adde

Performance Analysis of a Two-Hop MIMO Mobile-to-Mobile via Stratospheric-Relay Link Employing Hierarchical Modulation

Next generation wireless communication networks intend to take advantage of the integration of terrestrial and aerospace infrastructures. Besides, multiple-input multiple-output (MIMO) architecture is the key technology, which has brought the wireless gigabit vision closer to reality. In this direction, high-altitude platforms (HAPs) could act as relay stations in the stratosphere transferring information from an uplink to a downlink MIMO channel. This paper investigates the performance of a novel transmission scheme for the delivery of mobile-to-mobile (M-to-M) services via a stratospheric relay. It is assumed that the source, relay, and destination nodes are equipped with multiple antennas and that amplify-and-forward (AF) relaying is adopted. The performance is analyzed through rigorous simulations in terms of the bit-error rate (BER) by using a recently proposed 3D geometry-based reference model in spatially correlated flat-fading MIMO channels, employing a hierarchical broadcast technique and minimum mean square error (MMSE) receivers