Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

Survey of congestion control techniques for an ATM network

The emerging broadband integrated services digital network is expected to adopt ATM (Asynchronous Transfer Mode) as the transport network. This new network must support several classes of service with varying delay and loss requirements. It must also operate with link speeds in the hundreds of megabits per second and be scalable up to potential link speeds on the order of gigabits per second. The requirements to support multiple services and high speed make the congestion control in an ATM network difficult. This paper reviews sorne of the techniques for prevention and control of congestion in an ATM network

TCP over High Speed Variable Capacity Links: A Simulation Study for Bandwidth Allocation

New optical network technologies provide opportunities for fast, controllable bandwidth management. These technologies can now explicitly provide resources to data paths, creating demand driven bandwidth reservation across networks where an applications bandwidth needs can be meet almost exactly. Dynamic synchronous Transfer Mode (DTM) is a gigabit network technology that provides channels with dynamically adjustable capacity. TCP is a reliable end-to-end transport protocol that adapts its rate to the available capacity. Both TCP and the DTM bandwidth can react to changes in the network load, creating a complex system with inter-dependent feedback mechanisms. The contribution of this work is an assessment of a bandwidth allocation scheme for TCP flows on variable capacity technologies. We have created a simulation environment using ns-2 and our results indicate that the allocation of bandwidth maximises TCP throughput for most flows, thus saving valuable capacity when compared to a scheme such as link over-provisioning. We highlight one situation where the allocation scheme might have some deficiencies against the static reservation of resources, and describe its causes. This type of situation warrants further investigation to understand how the algorithm can be modified to achieve performance similar to that of the fixed bandwidth case

A methodological approach to BISDN signalling performance

Sophisticated signalling protocols are required to properly handle the complex multimedia, multiparty services supported by the forthcoming BISDN. The implementation feasibility of these protocols should be evaluated during their design phase, so that possible performance bottlenecks are identified and removed. In this paper we present a methodology for evaluating the performance of BISDN signalling systems under design. New performance parameters are introduced and their network-dependent values are extracted through a message flow model which has the capability to describe the impact of call and bearer control separation on the signalling performance. Signalling protocols are modelled through a modular decomposition of the seven OSI layers including the service user to three submodels. The workload model is user descriptive in the sense that it does not approximate the direct input traffic required for evaluating the performance of a layer protocol; instead, through a multi-level approach, it describes the actual implications of user signalling activity for the general signalling traffic. The signalling protocol model is derived from the global functional model of the signalling protocols and information flows using a network of queues incorporating synchronization and dependency functions. The same queueing approach is followed for the signalling transfer network which is used to define processing speed and signalling bandwidth requirements and to identify possible performance bottlenecks stemming from the realization of the related protocols

Quality of Service over Specific Link Layers: state of the art report

The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service

Operational and Performance Issues of a CBQ router

The use of scheduling mechanisms like Class Based Queueing (CBQ) is expected to play a key role in next generation multiservice IP networks. In this paper we attempt an experimental evaluation of ALTQ/CBQ demonstrating its sensitivity to a wide range of parameters and link layer driver design issues. We pay attention to several CBQ internal parameters that affect performance drastically and particularly to “borrowing”, a key feature for flexible and efficient link sharing. We are also investigating cases where the link sharing rules are violated, explaining and correcting these effects wheneverpossible. Finally we evaluateCBQ performance and make suggestions for effective deployment in real networks.

DTMsim - DTM channel simulation in ns

Dynamic Transfer Mode (DTM) is a ring based MAN technology that provides a channel abstraction with a dynamically adjustable capacity. TCP is a reliable end to end transport protocol capable of adjusting its rate. The primary goal of this work is investigate the coupling of dynamically allocating bandwidth to TCP flows with the affect this has on the congestion control mechanism of TCP. In particular we wanted to find scenerios where this scheme does not work, where either all the link capacity is allocated to TCP or congestion collapse occurs and no capacity is allocated to TCP. We have created a simulation environment using ns-2 to investigate TCP over networks which have a variable capacity link. We begin with a single TCP Tahoe flow over a fixed bandwidth link and progressively add more complexity to understand the behaviour of dynamically adjusting link capacity to TCP and vice versa

Electronic and photonic switching in the atm era

Broadband networks require high-capacity switches in order to properly manage large amounts of traffic fluxes. Electronic and photonic technologies are being used to achieve this objective both allowing different multiplexing and switching techniques. Focusing on the asynchronous transfer mode (ATM), the inherent different characteristics of electronics and photonics makes different architectures feasible. In this paper, different switching structures are described, several ATM switching architectures which have been recently implemented are presented and the implementation characteristics discussed. Three diverse points of view are given from the electronic research, the photonic research and the commercial switches. Although all the architectures where successfully tested, they should also follow different market requirements in order to be commercialised. The characteristics are presented and the architectures projected over them to evaluate their commercial capabilities.Peer ReviewedPostprint (published version