High-performance subthreshold standard cell design and cell placement optimization

Please see PDF for exact formulas

Low-power CMOS front-ends for wireless personal area networks

The potential of implementing subthreshold radio frequency circuits in deep sub-micron CMOS technology was investigated for developing low-power front-ends for wireless personal area network (WPAN) applications. It was found that the higher transconductance to bias current ratio in weak inversion could be exploited in developing low-power wireless front-ends, if circuit techniques are employed to mitigate the higher device noise in subthreshold region. The first fully integrated subthreshold low noise amplifier was demonstrated in the GHz frequency range requiring only 260 μW of power consumption. Novel subthreshold variable gain stages and down-conversion mixers were developed. A 2.4 GHz receiver, consuming 540 μW of power, was implemented using a new subthreshold mixer by replacing the conventional active low noise amplifier by a series-resonant passive network that provides both input matching and voltage amplification. The first fully monolithic subthreshold CMOS receiver was also implemented with integrated subthreshold quadrature LO (Local Oscillator) chain for 2.4 GHz WPAN applications. Subthreshold operation, passive voltage amplification, and various low-power circuit techniques such as current reuse, stacking, and differential cross coupling were combined to lower the total power consumption to 2.6 mW. Extremely compact resistive feedback CMOS low noise amplifiers were presented as a cost-effective alternative to narrow band LNAs using high-Q inductors. Techniques to improve linearity and reduce power consumption were presented. The combination of high linearity, low noise figure, high broadband gain, extremely small die area and low power consumption made the proposed LNA architecture a compelling choice for many wireless applications.Ph.D.Committee Chair: Laskar, Joy; Committee Member: Chakraborty, Sudipto; Committee Member: Chang, Jae Joon; Committee Member: Divan, Deepakraj; Committee Member: Kornegay, Kevin; Committee Member: Tentzeris, Emmanoui

Design and Analysis of Robust Low Voltage Static Random Access Memories.

Static Random Access Memory (SRAM) is an indispensable part of most modern VLSI designs and dominates silicon area in many applications. In scaled technologies, maintaining high SRAM yield becomes more challenging since they are particularly vulnerable to process variations due to 1) the minimum sized devices used in SRAM bitcells and 2) the large array sizes. At the same time, low power design is a key focus throughout the semiconductor industry. Since low voltage operation is one of the most effective ways to reduce power consumption due to its quadratic relationship to energy savings, lowering the minimum operating voltage (Vmin) of SRAM has gained significant interest. This thesis presents four different approaches to design and analyze robust low voltage SRAM: SRAM analysis method improvement, SRAM bitcell development, SRAM peripheral optimization, and advance device selection. We first describe a novel yield estimation method for bit-interleaved voltage-scaled 8-T SRAMs. Instead of the traditional trade-off between write and read, the trade-off between write and half select disturb is analyzed. In addition, this analysis proposes a method to find an appropriate Write Word-Line (WWL) pulse width to maximize yield. Second, low leakage 10-T SRAM with speed compensation scheme is proposed. During sleep mode of a sensor application, SRAM retaining data cannot be shut down so it is important to minimize leakage in SRAM. This work adopts several leakage reduction techniques while compensating performance. Third, adaptive write architecture for low voltage 8-T SRAMs is proposed. By adaptively modulating WWL width and voltage level, it is possible to achieve low power consumption while maintaining high yield without excessive performance degradation. Finally, low power circuit design based on heterojunction tunneling transistors (HETTs) is discussed. HETTs have a steep subthreshold swing beneficial for low voltage operation. Device modeling and design of logic and SRAM are proposed.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91569/1/daeyeonk_1.pd

Addressing On-Chip Power Conversion and Dissipation Issues in Many-Core System-on-a-Chip based on Conventional Silicon and Emerging Nanotechnologies

Title from PDF of title page viewed August 27, 2018Dissertation advisor: Masud H ChowdhuryVitaIncludes bibliographical references (pages 158-163)Thesis (Ph.D.)--School of Computing and Engineering and Department of Physics and Astronomy. University of Missouri--Kansas City, 2017Integrated circuits (ICs) are moving towards system-on-a-chip (SOC) designs. SOC allows various small and large electronic systems to be implemented in a single chip. This approach enables the miniaturization of design blocks that leads to high density transistor integration, faster response time, and lower fabrication costs. To reap the benefits of SOC and uphold the miniaturization of transistors, innovative power delivery and power dissipation management schemes are paramount. This dissertation focuses on on-chip integration of power delivery systems and managing power dissipation to increase the lifetime of energy storage elements. We explore this problem from two different angels: On-chip voltage regulators and power gating techniques. On-chip voltage regulators reduce parasitic effects, and allow faster and efficient power delivery for microprocessors. Power gating techniques, on the other hand, reduce the power loss incurred by circuit blocks during standby mode. Power dissipation (Ptotal = Pstatic and Pdynamic) in a complementary metal-oxide semiconductor (CMOS) circuit comes from two sources: static and dynamic. A quadratic dependency on the dynamic switching power and a more than linear dependency on static power as a form of gate leakage (subthreshold current) exist. To reduce dynamic power loss, the supply power should be reduced. A significant reduction in power dissipation occurs when portions of a microprocessor operate at a lower voltage level. This reduction in supply voltage is achieved via voltage regulators or converters. Voltage regulators are used to provide a stable power supply to the microprocessor. The conventional off-chip switching voltage regulator contains a passive floating inductor, which is difficult to be implemented inside the chip due to excessive power dissipation and parasitic effects. Additionally, the inductor takes a very large chip area while hampering the scaling process. These limitations make passive inductor based on-chip regulator design very unattractive for SOC integration and multi-/many-core environments. To circumvent the challenges, three alternative techniques based on active circuit elements to replace the passive LC filter of the buck convertor are developed. The first inductorless on-chip switching voltage regulator architecture is based on a cascaded 2nd order multiple feedback (MFB) low-pass filter (LPF). This design has the ability to modulate to multiple voltage settings via pulse with modulation (PWM). The second approach is a supplementary design utilizing a hybrid low drop-out scheme to lower the output ripple of the switching regulator over a wider frequency range. The third design approach allows the integration of an entire power management system within a single chipset by combining a highly efficient switching regulator with an intermittently efficient linear regulator (area efficient), for robust and highly efficient on-chip regulation. The static power (Pstatic) or subthreshold leakage power (Pleak) increases with technology scaling. To mitigate static power dissipation, power gating techniques are implemented. Power gating is one of the popular methods to manage leakage power during standby periods in low-power high-speed IC design. It works by using transistor based switches to shut down part of the circuit block and put them in the idle mode. The efficiency of a power gating scheme involves minimum Ioff and high Ion for the sleep transistor. A conventional sleep transistor circuit design requires an additional header, footer, or both switches to turn off the logic block. This additional transistor causes signal delay and increases the chip area. We propose two innovative designs for next generation sleep transistor designs. For an above threshold operation, we present a sleep transistor design based on fully depleted silicon-on-insulator (FDSOI) device. For a subthreshold circuit operation, we implement a sleep transistor utilizing the newly developed silicon-on ferroelectric-insulator field effect transistor (SOFFET). In both of the designs, the ability to control the threshold voltage via bias voltage at the back gate makes both devices more flexible for sleep transistors design than a bulk MOSFET. The proposed approaches simplify the design complexity, reduce the chip area, eliminate the voltage drop by sleep transistor, and improve power dissipation. In addition, the design provides a dynamically controlled Vt for times when the circuit needs to be in a sleep or switching mode.Introduction -- Background and literature review -- Fully integrated on-chip switching voltage regulator -- Hybrid LDO voltage regulator based on cascaded second order multiple feedback loop -- Single and dual output two-stage on-chip power management system -- Sleep transistor design using double-gate FDSOI -- Subthreshold region sleep transistor design -- Conclusio

Performance enhancement in the desing of amplifier and amplifier-less circuits in modern CMOS technologies.

In the context of nowadays CMOS technology downscaling and the increasing demand of high performance electronics by industry and consumers, analog design has become a major challenge. On the one hand, beyond others, amplifiers have traditionally been a key cell for many analog systems whose overall performance strongly depends on those of the amplifier. Consequently, still today, achieving high performance amplifiers is essential. On the other hand, due to the increasing difficulty in achieving high performance amplifiers in downscaled modern technologies, a different research line that replaces the amplifier by other more easily achievable cells appears: the so called amplifier-less techniques. This thesis explores and contributes to both philosophies. Specifically, a lowvoltage differential input pair is proposed, with which three multistage amplifiers in the state of art are designed, analysed and tested. Moreover, a structure for the implementation of differential switched capacitor circuits, specially suitable for comparator-based circuits, that features lower distortion and less noise than the classical differential structures is proposed, an, as a proof of concept, implemented in a ΔΣ modulator

A Charge-Recycling Scheme and Ultra Low Voltage Self-Startup Charge Pump for Highly Energy Efficient Mixed Signal Systems-On-A-Chip

The advent of battery operated sensor-based electronic systems has provided a pressing need to design energy-efficient, ultra-low power integrated circuits as a means to improve the battery lifetime. This dissertation describes a scheme to lower the power requirement of a digital circuit through the use of charge-recycling and dynamic supply-voltage scaling techniques. The novel charge-recycling scheme proposed in this research demonstrates the feasibility of operating digital circuits using the charge scavenged from the leakage and dynamic load currents inherent to digital design. The proposed scheme efficiently gathers the “ground-bound” charge into storage capacitor banks. This reclaimed charge is then subsequently recycled to power the source digital circuit. The charge-recycling methodology has been implemented on a 12-bit Gray-code counter operating at frequencies of less than 50 MHz. The circuit has been designed in a 90-nm process and measurement results reveal more than 41% reduction in the average energy consumption of the counter. The total energy savings including the power consumed for the generation of control signals aggregates to an average of 23%. The proposed methodology can be applied to an existing digital path without any design change to the circuit but with only small loss to the performance. Potential applications of this scheme are described, specifically in wide-temperature dynamic power reduction and as a source for energy harvesters. The second part of this dissertation deals with the design and development of a self-starting, ultra-low voltage, switched-capacitor (SC) DC-DC converter that is essential to an energy harvesting system. The proposed charge-pump based SC-converter operates from 125-mV input and thus enables battery-less operation in ultra-low voltage energy harvesters. The charge pump does not require any external components or expensive post-fabrication processing to enable low-voltage operation. This design has been implemented in a 130-nm CMOS process. While the proposed charge pump provides significant efficiency enhancement in energy harvesters, it can also be incorporated within charge recycling systems to facilitate adaptable charge-recycling levels. In total, this dissertation provides key components needed for highly energy-efficient mixed signal systems-on-a-chip

ANALYSIS AND DESIGN OF AN ULTRA-LOW POWER LOW-NOISE DTMOS BASED INSTRUMENTATION AMPLIFIER APPLIED TO THE PHYSIOLOGICAL SIGNAL ACQUISITION SYSTEM

With the rapid development of Internet of Things (IoT) technology and the popularity of portable devices, portable medical devices will become widely available soon. Physiological signal monitoring sensors are widely used for personal health management and long-term healthcare monitoring, especially for preventing acute illnesses and chronic disease monitoring for pediatric and elderly. Physiological signal monitoring sensors have the ability to monitor people's behavior in real-time for various daily activities, such as physiological signals that exhibit different waveforms and amplitudes when sleeping and awake. The real-time collected signals can be frequently compared to medical databases to detect abnormal health data for preventive healthcare. Therefore, an accurate and error-free system that provides high-quality monitoring of physiological signals is very important. Typically, an instrumentation amplifier (IA) is used for high accurate acquisition and amplification within this system. An IA with excellent performance gives patients safer health conditions and allows patients to have better health protection.This work introduces an ultra-low-power instrumentation amplifier operating at sub-0.4V voltage. Using dynamic threshold voltage MOSFET (DTMOS). The DTMOS reduces threshold voltage further and increases the driven current while the device is operating. Therefore, the DTMOS-based folded-cascode has been chosen, resulting in an increases the common-mode rejection ratio (CMRR) of the circuit while increasing the output signal swing compared over conventional topologies. The IA takes the benefit of the rail-to-rail common-mode feedback circuit and chopping to reduce flicker noise and DC offset. Reducing the chip area and power consumption leads to the output signal's high signal-to-noise ratio (SNR). The post-simulation shows that the circuit archives 45dB gain, DC to 2.07KHz operating bandwidth, and 0.8μW total power consumption. The simulated CMRR is 103dB, with 80dB power supply rejection ratio (PSRR). The simulated input reference noise is 140nV/√Hz (@100Hz) with 7.27 Noise Efficiency Factor (NEF).Keywords: Instrumentation Amplifier, DTMOS, rail-to-rail, chopping, clock boosting switch, physiological acquisition, bio-medical application

Leakage Power Modeling and Reduction Techniques for Field Programmable Gate Arrays

FPGAs have become quite popular for implementing digital circuits and systems because of reduced costs and fast design cycles. This has led to increased complexity of FPGAs, and with technology scaling, many new challenges have come up for the FPGA industry, leakage power being one of the key challenges. The current generation FPGAs are being implemented in 90nm technology, therefore, managing leakage power in deep-submicron FPGAs has become critical for the FPGA industry to remain competitive in the semiconductor market and to enter the mobile applications domain. In this work an analytical state dependent leakage power model for FPGAs is developed, followed by dual-Vt based designs of the FPGA architecture for reducing leakage power. The leakage power model computes subthreshold and gate leakage in FPGAs, since these are the two dominant components of total leakage power in the scaled nanometer technologies. The leakage power model takes into account the dependency of gate and subthreshold leakage on the state of the circuit inputs. The leakage power model has two main components, one which computes the probability of a state for a particular FPGA circuit element, and the other which computes the leakage of the FPGA circuit element for a given input using analytical equations. This FPGA power model is particularly important for rapidly analyzing various FPGA architectures across different technology nodes. Dual-Vt based designs of the FPGA architecture are proposed, developed, and evaluated, for reducing the leakage power using a CAD framework. The logic and the routing resources of the FPGA are considered for dual-Vt assignment. The number of the logic elements that can be assigned high-Vt in the ideal case by using a dual-Vt assignment algorithm in the CAD framework is estimated. Based upon this estimate two kinds of architectures are developed and evaluated, homogeneous and heterogeneous architectures. Results indicate that leakage power savings of up to 50% can be obtained from these architectures. The analytical state dependent leakage power model developed has been used for estimating the leakage power savings from the dual-Vt FPGA architectures. The CAD framework that has been developed can also be used for developing and evaluating different dual-Vt FPGA architectures, other than the ones proposed in this work