All Optical Signal Processing Technologies in Optical Fiber Communication

Due to continued growth of internet at starling rate and the introduction of new broadband services, such as cloud computing, IPTV and high-definition media streaming, there is a requirement for flexible bandwidth infrastructure that supports mobility of data at peta-scale. Elastic networking based on gridless spectrum technology is evolving as a favorable solution for the flexible optical networking supportive next generation traffic requirements. Recently, research is centered on a more elastic spectrum provision methodology than the traditional ITU-T grid. The main issue is the requirement for a transmission connect, capable of accommodating and handling a variety of signals with distinct modulation format, baud rate and spectral occupancy. Segmented use of the spectrum could lead to the shortage of availableness of sufficiently extensive spectrum spaces for high bitrate channels, resulting in wavelength contention. On-demand space assignment creates not only deviation from the ideal course but also have spectrum fragmentation, which reduces spectrum resource utilization. This chapter reviewed the recent research development of feasible solutions for the efficient transport of heterogeneous traffic by enhancing the flexibility of the optical layer for performing allocation of network resources as well as implementation of optical node by all optical signal processing in optical fiber communication

Iterative Resource Allocation Algorithm for EONs Based on a Linearized GN Model

Elastic optical networks (EONs) rely on efficient resource planning to meet future communication needs and avoid resource overprovisioning. Estimation of physical-layer impairments (PLIs) in EONs plays an important role in the network planning stage. Traditionally, the transmission reach (TR) and Gaussian noise (GN) models have been broadly employed in the estimation of the PLIs. However, the TR model cannot accurately estimate PLIs, whereas the GN model is incompatible with state of the art linear optimization solvers. In this paper, we propose a physical-layer estimation model based on the GN model, referred to as the conservative linearized Gaussian noise (CLGN) model. To address the routing, spectrum, and regeneration assignment problem accounting for PLIs, we introduce a link-based mixed integer linear programming formulation employing the CLGN, whose heavy computational burden is relieved by a heuristic approach referred to as the sequential iterative optimization algorithm. We show through simulation that network resources such as spectrum and regeneration nodes can be saved utilizing the CLGN model rather than the TR model. Our proposed heuristic algorithm speeds up the optimization process and provides better resource usage compared to state of the art algorithms on benchmark networks

Impact of Amplification and Regeneration Schemes on the Blocking Performance and Energy Consumption of Wide-Area Elastic Optical Networks

This paper studies the physical layer’s impact on the blocking probability and energy consumption of wide-area dynamic elastic optical networks (EONs). For this purpose, we consider five network configurations, each named with a network configuration identifier (NCI) from 1 to 5, for which the Routing, Modulation Level, and Spectrum Assignment (RMLSA) problem is solved. NCI 1–4 are transparent configurations based on all-EDFA, hybrid Raman/EDFA amplifiers (with different Raman gain ratio ΓR ), all-DFRA, and alternating span configuration (EDFA and DFRA). NCI 5 is a translucent configuration based on all-EDFA and 3R regenerators. We model the physical layer for every network configuration to determine the maximum achievable reach of optical signals. Employing simulation, we calculate the blocking probability and the energy consumption of the different network configurations. In terms of blocking, our results show that NCI 2 and 3 offer the lowest blocking probability, with at least 1 and 3 orders of magnitude of difference with respect to NCI 1 and 5 at high and low traffic loads, respectively. In terms of energy consumption, the best performing alternatives are the ones with the worst blocking (NCI 1), while NCI 3 exhibits the highest energy consumption with NCI 2ΓR=0.75 following closely. This situation highlights a clear trade-off between blocking performance and energy cost that must be considered when designing a dynamic EON. Thus, we identify NCI 2 using ΓR=0.25 as a promising alternative to reduce the blocking probability significantly in wide-area dynamic EONs without a prohibitive increase in energy consumption

Cross-layer static resource provisioning for dynamic traffic in flexible grid optical networks

Flexible grid networks need rigorous resource planning to avoid network over-dimensioning and resource over-provisioning. The network must provision the hardware and spectrum resources statically, even for dynamic random bandwidth demands, due to the infrastructure of flexible grid networks, hardware limitations, and reconfiguration speed of the control plane. We propose a flexible online–offline probabilistic (FOOP) algorithm for the static spectrum assignment of random bandwidth demands. The FOOP algorithm considers the probabilistic nature of random bandwidth demands and balances hardware and control plane pressures with spectrum assignment efficiency. The FOOP algorithm uses the probabilistic spectrum Gaussian noise (PSGN) model to estimate the physical-layer impairment (PLI) for random bandwidth traffic. Compared to a benchmark spectrum assignment algorithm and a widely applied PLI estimation model, the proposed FOOP algorithm using the PSGN model saves up to 49% of network resources

BER-Adaptive RMLSA Algorithm for Wide-Area Flexible Optical Networks

Wide-area optical networks face significant transmission challenges due to the relentless growth of bandwidth demands experienced nowadays. Network operators must consider the relationship between modulation format and maximum reach for each connection request due to the accumulation of physical layer impairments in optical fiber links, to guarantee a minimum quality of service (QoS) and quality of transmission (QoT) to all connection requests. In this work, we present a BER-adaptive solution to solve the routing, modulation format, and spectrum assignment (RMLSA) problem for wide-area elastic optical networks. Our main goal is to maximize successful connection requests in wide-area networks while choosing modulation formats with the highest efficiency possible. Consequently, our technique uses an adaptive bit-error-rate (BER) threshold to achieve communication with the best QoT in the most efficient manner, using the strictest BER value and the modulation format with the smallest bandwidth possible. Additionally, the proposed algorithm relies on 3R regeneration devices to enable long-distances communications if transparent communication cannot be achieved. We assessed our method through simulations for various network conditions, such as the number of regenerators per node, traffic load per user, and BER threshold values. In a scenario without regenerators, the BER-Adaptive algorithm performs similarly to the most relaxed fixed BER threshold studied in blocking probability. However, it ensures a higher QoT to most of the connection requests. The proposed algorithm thrives with the use of regenerators, showing the best performance among the studied solutions, enabling long-distance communications with a high QoT and low blocking probability

Static resource allocation for dynamic traffic

A flexible offline probabilistic (FOP) algorithm is designed to aggressively accommodate random bandwidth traffic demands in long-haul networks. Compared to algorithms that configure demands according to their maximum bandwidth, the FOP algorithm can save 15% of the spectrum used, accommodating over 99% of the throughput demand

Routing, spectrum allocation and regenerator placement in flexible-grid optical networks

Ankara : The Department of Electrical and Electronics Engineering and the Graduate School of Engineering and Science of Bilkent University, 2013.Thesis (Master's) -- Bilkent University, 2013.Includes bibliographical references leaves 57-61.Tremendous increase in the number of wireless devices has been resulting in huge growth in the Internet traffic. This growth necessitates efficient usage of resources in the optical networks, which form the backbone of the Internet. Recently proposed flexible optical networks can adjust the optical layer transmission parameters to take advantage of existing channel conditions thereby increasing the resource utilization efficiency. Therefore, flexible optical network is a promising solution to fulfill growing future demand of IP traffic. Apart from efficient usage of the optical spectrum, the degradation of the optical signal as it propagates over the fiber is another problem. In such cases, the optical signal must be regenerated when a lightpath travels longer than the maximum optical reach. However, regenerators are expensive devices with high operational costs. Therefore, they should be placed carefully to reduce the capital and operational network costs. In this dissertation, we deal with the joint routing, spectrum allocation and regenerator placement (RSA-RP) problem for flexible optical networks. Our aim is to find the route and allocate spectrum for each traffic demand by assigning minimum number of nodes as regenerator sites. Firstly, we introduce a novel mixed integer linear programming (MILP) formulation for the joint RSA-RP problem. Since this formulation is not practical for large networks, we propose a decoupled formulation where the RSA-RP problem is decomposed into two phases. In the first step, we find routes and locations of regenerators assuming a full wavelength converting network. Then, we allocate the spectrum to each demand in the second phase. The decoupled model can be used to solve the RSA-RP problem for reasonably sized optical networks. We show that the decoupled model can find optimum solutions for 92% of the all cases tested for the NSFNET topology and 99% of the all cases tested for the Deutsche Telecom topology. We also show that the locations of regenerator sites significantly depend on network parameters such as the node degree and lengths of the links adjacent to the node.Kahya, AlperM.S

Contributions to network planning and operation of Flex-Grid/SDM optical core networks

Premi Extraordinari de Doctorat, promoció 2018-2019. Àmbit de les TICThe ever demanding bandwidth requirements for supporting emerging telecom services such as ultra-high-definition video streaming, cloud computing, connected car, virtual/augmented reality, etc., bring to the fore the necessity to upgrade continuously the technology behind transport networks in order to keep pace with this exponential traffic growth. Thus, everything seems to indicate that fixed-grid Wavelength-Division Multiplexed (WDM) networks will be upgraded by adopting a flexible-grid, thus providing finer bandwidth allocation granularities, and therefore, increasing the Grade-of-Service by packing more information in the same spectral band of standard Single-Mode Fibers (SMFs). Nevertheless, unfortunately, the fundamental Shannon’s limit of SMFs is rapidly approaching, and, then, the research efforts to increase the SMFs' capacity will be useless. One solution to overcome this capacity crunch effect is to enable one extra dimension in addition to the frequency one, namely, the spatial dimension, thus deploying S parallel paths in order to multiply, in the best case, by S the capacity of SMF-based networks. However, additionally, it is necessary to decrease the cost and energy per bit in order to provide economically attractive solutions. For this purpose, a smooth upgrade path has to be carried out as new integrated devices and system components are developed for Space Division Multiplexing (SDM). This thesis is concentrated on the planning and operation of the combined flexible WDM and SDM networks (i.e., Flex-Grid/SDM networks) proposing several strategies aimed at optimizing network resources usage with hardware complexity analysis. For this purpose, firstly, network problems are carefully studied and stated, and then, mathematical and/or heuristic algorithms are designed and implemented in an optical network simulator. Specifically, after an introduction to the thesis, chapter 2 presents the background and related work. Next, chapter 3 concentrates on the study of spatially fixed Flex-Grid/SDM networks, i.e., when a rigid number of spatial channels are reserved per allocated traffic demand. In its turn, chapter 4 studies the case of Spectrally-Spatially Flexible Optical Networks (SS-FONs), as the ones providing the upper-bound network capacity. Costs and hardware requirements implied on providing this flexibility are analyzed. Network nodes aimed at reducing the cost of SS-FONs are presented and evaluated in chapter 5. Finally, this thesis ends with the presentation of the main contributions and future research work in chapter 6.La demanda de ancho de banda cada vez más exigente para soportar servicios de telecomunicación emergentes tales como la transmisión de video de alta calidad, computación en la nube, vehículo conectado, realidad virtual/aumentada, etc.…, ha puesto de manifiesto la necesidad de actualizar constantemente la tecnología detrás de las redes de transporte óptico con la finalidad de ir a la par de este incremento exponencial del tráfico. De esta manera, todo parece indicar que las redes basadas en la multiplexación por division de longitud de onda (Wavelength Division Multiplexing, WDM) de ancho espectral fijo serán actualizadas adoptando un ancho de banda espectral flexible, que ofrece asignaciones de ancho de banda con granularidad más fina acorde a las demandas de tráfico; y por lo tanto, incremanta el Grado de Servicio de la red, ya que se permite acomodar mayor información en la misma banda espectral de las fibras monomodo (Single Mode Fibers, SMFs). Sin embargo, desafortunadamente, el límite de Shannon de las fibras monomodo se está aproximando cada vez más, y cuando esto ocurra las investigaciones para incrementar la capacidad de las fibras monomodo serán infructuosas. Una posible solución para superar este colapso de las fibras monomodo es habilitar la dimensión espacial a más de la frecuencial, desplegando � caminos paralelos con la finalidad de multiplicar por � (en el mejor de los casos) la capacidad de las fibras monomodo. No obstante, es necesario disminuir el costo y la energía por bit con la finalidad de proveer soluciones comerciales atractivas. Para tal propósito debe llevarse a cabo una actualización moderada conforme nuevos dispositivos y componentes integrados son desarrollados para la implementación de la tecnología basada en la multiplexación por división de espacio (Space Division Multiplexing, SDM). Esta tesis se concentra en la planificación y operación de la combinación de las redes WDM flexibles y SDM (es decir, de las redes Flex-Grid/SDM) proponiendo varias estrategias dirigidas a optimizar el uso de los recursos de red junto con el análisis de la complejidad del hardware que viene acompañada. Para este fin, primeramente, los problemas de red son cuidadosamente estudiados y descritos. A continuación, se han diseñado e implementado algoritmos basados en programación lineal entera o heurísticas en un simulador de redes ópticas. Después de una introducción inicial, el capítulo 2 de esta tesis presenta el marco teórico sobre los conceptos tratados y los trabajos publicados anteriormente. A continuación, el capítulo 3 se concentra en el estudio de las redes Flex-Grid/SDM con la dimensión espacial rígida; es decir, cuando un número fijo de canales espaciales son reservados por cada demanda de tráfico establecida. Por su parte, el capítulo 4 estudia las redes Flex-Grid/SDM considerando flexibilidad tanto en el dominio espacial como espectral (Spectrally and Spatially Flexible Optical Networks, SS-FONs), las cuales proveerían la capacidad máxima de las redes SDM. Adicionalmente, los costos y requerimientos de hardware implicados en la provisión de esta flexibilidad son analizados. El capítulo 5 presenta la evaluación de nodos orientados a reducir los costos de las SS-FONs. Finalmente, el capítulo 6 expone las principales contribuciones y las posibles líneas de trabajo futuroEls requisits incessants d’ample de banda per al suport de nous serveis de telecomunicació, com poden ser la difusió en directe de vídeo de molt alta definició, la informàtica en el núvol, els cotxes intel·ligents connectats a la xarxa, la realitat virtual/augmentada, etc…, han exigit una millora contínua de les tecnologíes de les actuals xarxes de transport de dades. Tot sembla indicar que les xarxes de transport òptiques actuals, basades en la tecnologia de multiplexació per divisió de longitud d’ona (Wavelength Division Multiplexing, WDM) sobre un grid espectral rígid, hauran de ser reemplaçades per tecnologies òptiques més flexibles, amb una granularitat més fina a l’hora de suportar noves connexions, incrementat el grau de servei de les xarxes gràcies a aprofitament major de l’ample de banda espectral proporcionat per les fibres òptiques monomode (Single Mode Fibers, SMFs). Tanmateix, estem exhaurint ja la capacitat màxima de les fibres òptiques SMF segons ens indica el límit fonamental de Shannon. Per tant, qualsevol esforç enfocat a millorar la capacitat d’aquestes xarxes basades en SMFs pot acabar sent infructuós. Una possible solució per superar aquestes limitacions de capacitat és explorar la dimensió espacial, a més de l’espectral, desplegant camins en paral·lel per tal de multiplicar per , en el millor cas, la capacitat de les SMFs. Tot i això, és necessari reduir el cost i el consum energètic per bit transmès, per tal de proporcionar solucions econòmicament viables. Amb aquest propòsit, pot ser necessària una migració progressiva, a mesura que es desenvolupen nous dispositius i components per aquesta nova tecnologia de multiplexació per divisió espacial (Spatial Division Multiplexing, SDM). La present tesi es centra en la planificació i operació de xarxes òptiques de nova generació que combinin tecnologies de xarxa WDM flexible i SDM (és a dir, xarxes Flex-Grid/SDM), proposant estratègies per a l’optimització de l’ús dels recursos de xarxa i, en definitiva, el seu cost (CapEx). Amb aquest propòsit, s’analitzen en primer moment els problemes adreçats. Tot seguit, es dissenyen algorismes per tal de solucionar-los, basats en tècniques de programació matemàtica i heurístiques, els quals s’implementen i es proven en un simulador de xarxa òptica. Després d’una introducció inicial, el capítol 2 d’aquesta tesi presenta tots els conceptes tractats i treballs relacionats publicats amb anterioritat. Tot seguit, el capítol 3 es centra en l’estudi de les xarxes Flex-Grid/SDM fixes en el domini espai, és a dir, on sempre es reserva un nombre rígid de canals espacials per qualsevol demanda suportada. El capítol 4 estudia les xarxes flexibles en els dominis espectrals i espacials (Spectrally-Spatially Flexible Optical Nextworks, SS-FONs), com aquelles que poden proporcionar una capacitat de xarxa màxima. En aquest context, s’analitzen els requeriments en termes de cost i hardware per tal de proporcionar aquesta flexibilitat. Llavors, en el capítol 6 es presenten opcions de node de xarxa capaces de reduir els costos de les xarxes SS-FONs. Finalment, en el capítol 7 es repassen totes les contribucions de la tesi, així com posibles línies de treball futurAward-winningPostprint (published version

Roadmap of optical communications

© 2016 IOP Publishing Ltd. Lightwave communications is a necessity for the information age. Optical links provide enormous bandwidth, and the optical fiber is the only medium that can meet the modern society's needs for transporting massive amounts of data over long distances. Applications range from global high-capacity networks, which constitute the backbone of the internet, to the massively parallel interconnects that provide data connectivity inside datacenters and supercomputers. Optical communications is a diverse and rapidly changing field, where experts in photonics, communications, electronics, and signal processing work side by side to meet the ever-increasing demands for higher capacity, lower cost, and lower energy consumption, while adapting the system design to novel services and technologies. Due to the interdisciplinary nature of this rich research field, Journal of Optics has invited 16 researchers, each a world-leading expert in their respective subfields, to contribute a section to this invited review article, summarizing their views on state-of-the-art and future developments in optical communications