1,863 research outputs found
Restoration of Atmospheric Turbulence Degraded Video using Kurtosis Minimization and Motion Compensation
In this thesis work, the background of atmospheric turbulence degradation in imaging was reviewed and two aspects are highlighted: blurring and geometric distortion. The turbulence burring parameter is determined by the atmospheric turbulence condition that is often unknown; therefore, a blur identification technique was developed that is based on a higher order statistics (HOS). It was observed that the kurtosis generally increases as an image becomes blurred (smoothed). Such an observation was interpreted in the frequency domain in terms of phase correlation. Kurtosis minimization based blur identification is built upon this observation. It was shown that kurtosis minimization is effective in identifying the blurring parameter directly from the degraded image. Kurtosis minimization is a general method for blur identification. It has been tested on a variety of blurs such as Gaussian blur, out of focus blur as well as motion blur. To compensate for the geometric distortion, earlier work on the turbulent motion compensation was extended to deal with situations in which there is camera/object motion. Trajectory smoothing is used to suppress the turbulent motion while preserving the real motion. Though the scintillation effect of atmospheric turbulence is not considered separately, it can be handled the same way as multiple frame denoising while motion trajectories are built.Ph.D.Committee Chair: Mersereau, Russell; Committee Co-Chair: Smith, Mark; Committee Member: Lanterman, Aaron; Committee Member: Wang, May; Committee Member: Tannenbaum, Allen; Committee Member: Williams, Dougla
Blind phase noise estimation for CO-OFDM transmissions
In this paper, we discuss in detail the performance of different blind phase noise estimation schemes for coherent optical orthogonal frequency-division multiplexing transmissions. We first derive a general model of such systems with phase noise. Based on this model, the phase cycle slip probability in blind phase noise estimation is calculated. For blind phase tracking, we present and discuss the implementation of feedback loop and digital phase tracking. We then analyze in detail the performance of a decision-direct-free blind scheme, in which only three test phases are required for phase noise compensation. We show that the decision-direct-free blind scheme is transparent to QAM formats, and can provide a similar performance to the conventional blind phase search employing 16 test phases. We also propose two novel cost functions to further reduce the complexity of this scheme
Recommended from our members
Novel algorithms in wireless CDMA systems for estimation and kernel based equalization
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.A powerful technique is presented for joint blind channel estimation and carrier offset
method for code- division multiple access (CDMA) communication systems. The new
technique combines singular value decomposition (SVD) analysis with carrier offset parameter. Current blind methods sustain a high computational complexity as they require the computation of a large SVD twice, and they are sensitive to accurate knowledge of the noise subspace rank. The proposed method overcomes both problems by computing the SVD only once. Extensive simulations using MatLab demonstrate the robustness of the proposed scheme and its performance is comparable to other existing SVD techniques with significant lower computational as much as 70% cost because it does not require knowledge of the rank of the noise sub-space. Also a kernel based equalization for CDMA communication systems is proposed, designed and simulated using MatLab. The proposed method in CDMA systems
overcomes all other methods
SYNCHRONIZATION AND RESOURCE ALLOCATION IN DOWNLINK OFDM SYSTEMS
The next generation (4G) wireless systems are expected to provide
universal personal and multimedia communications with seamless connection
and very high rate transmissions and without regard to the users’ mobility and
location. OFDM technique is recognized as one of the leading candidates to
provide the wireless signalling for 4G systems. The major challenges in
downlink multiuser OFDM based 4G systems include the wireless channel, the
synchronization and radio resource management. Thus algorithms are required
to achieve accurate timing and frequency offset estimation and the efficient
utilization of radio resources such as subcarrier, bit and power allocation.
The objectives of the thesis are of two fields. Firstly, we presented the
frequency offset estimation algorithms for OFDM systems. Building our work
upon the classic single user OFDM architecture, we proposed two FFT-based
frequency offset estimation algorithms with low computational complexity.
The computer simulation results and comparisons show that the proposed
algorithms provide smaller error variance than previous well-known algorithm.
Secondly, we presented the resource allocation algorithms for OFDM
systems. Building our work upon the downlink multiuser OFDM architecture,
we aimed to minimize the total transmit power by exploiting the system
diversity through the management of subcarrier allocation, adaptive
modulation and power allocation. Particularly, we focused on the dynamic
resource allocation algorithms for multiuser OFDM system and multiuser
MIMO-OFDM system. For the multiuser OFDM system, we proposed a lowiv
complexity channel gain difference based subcarrier allocation algorithm. For
the multiuser MIMO-OFDM system, we proposed a unit-power based
subcarrier allocation algorithm. These proposed algorithms are all combined
with the optimal bit allocation algorithm to achieve the minimal total transmit
power. The numerical results and comparisons with various conventional nonadaptive
and adaptive algorithmic approaches are provided to show that the
proposed resource allocation algorithms improve the system efficiencies and
performance given that the Quality of Service (QoS) for each user is
guaranteed.
The simulation work of this project is based on hand written codes in the
platform of the MATLAB R2007b
Impacto de imperfeições do laser em receptores ópticos coerentes com formatos de modulação de alta ordem
Orientador: Darli Augusto de Arruda MelloDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Atualmente, os sistemas ópticos coerentes transmitem grandes volumes de informação graças à utilização de formatos de modulação de alta ordem. No entanto, esses formatos de modulação são mais suscetíveis a perturbações de fase geradas por imperfeições nos lasers utilizados no transmissor e receptor. Este trabalho centrou-se em uma análise das imperfeições do laser e seu impacto sobre o desempenho de receptores ópticos coerentes com formatos de modulação de alta ordem. Em especial, avaliaram-se as duas fontes principais de perturbações de fase: o ruído de fase do laser e as flutuações na frequência de operação, efeito conhecido como jitter de frequência da portadora. Primeiramente, investigou-se o impacto das imperfeições do laser por meio de simulações. O ruído de fase foi simulado como um processo discreto de Wiener, e o jitter de frequência foi modelado como uma forma de onda senoidal. Os resultados permitiram avaliar o comportamento do sistema sob diversas condições de frequência e amplitude do sinal de jitter. Posteriormente, o impacto das perturbações de fase foi avaliado por meio de experimentos. Observou-se que parâmetro de largura de linha calculado por métodos existentes não é suficiente para prever o comportamento dos algoritmos de processamento digital de sinais sob condições intensas de jitter. Alternativamente, o trabalho sugeriu uma metodologia mais conveniente para prever o impacto das perturbações do laser no desempenho do sistema, que leva em consideração a composição de ruído de fase e jitter de frequênciaAbstract: Currently, coherent optical systems transmit large volumes of information thanks to the use of high-order modulation formats. However, such modulation formats are more susceptible to phase perturbations generated by imperfections in the lasers used in the transmitter and receiver. This work focused on an analysis of laser imperfections and their impact on the performance of coherent optical receivers with high-order modulation formats. In particular, the two main sources of phase perturbations were evaluated: laser phase noise and fluctuations in the operating frequency, an effect known as carrier frequency jitter. First, the impact of laser imperfections was evaluated by simulations. Phase noise was modeled as a Wiener process, and frequency jitter was assumed to be sinusoidal. The results allowed to evaluate the behavior of the system under different conditions of frequency and amplitude of the jitter signal. Later, the impact of phase perturbations was evaluated through experiments. It was observed that the laser linewidth calculated by existing methods is not sufficient to predict the behavior of the digital signal processing algorithms under intense jitter conditions. Alternatively, the work suggested a more convenient methodology for predicting the impact of laser perturbations on system performance, which takes into account the composition of phase noise and carrier frequency jitterMestradoTelecomunicações e TelemáticaMestra em Engenharia ElétricaCAPE
- …